SmallHD PageOS firmware
SmallHD · PageOS · PageOS · Video
Latest firmware for the SmallHD PageOS is v6.4.0 (September 30, 2026).
Changelog
PageOS firmware changelog
Firmware history
-
Release notes & download
Show release notes Hide release notes
Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 700 Series, Other Services, Others.
Important Software Information: PLEASE READ BELOW
OLDER FIRMWARE IS LISTED BELOW, CLICK "SHOW MORE"
Click Here for a complete list of compatible monitors
This firmware will NOT support the following monitors:
703 Bolt
703 Ultra bright SK RX
Cine7 TX
Cine7 RX
Cine7 SK RX
1303 HDR BOLT SIDEKICK
1703 P3X BOLT SIDEKICK
FOCUS PRO
FOCUS PRO OLED
Focus 5 & 7 (LCD, OLED, HDMI, SDI, & RX/TX)
2403 HDR & 2403 HB
1703 HDR & 1703 Studio
1303 Studio
700 Series - 701, 701L, 702 Bright, 702 OLED
500 Series - 501, 502, 502 Bright
This firmware is NOT compatible with the DSMC3 RED®Touch, or Action 5
RED® Touch users have firmware available on the RED® Touch tab
This firmware is NOT compatible with legacy monitors (DP1, DP6, DP4, AC7, and
DP7-PRO)
- If your firmware is below 3.6.5, we recommend the following upgrade path:
- 3.6.5 -> 4.8.7 -> 5.5.6 -> 6.0.0
Features Added:
Camera Control support for Sony FX3 camera
Improved battery support for SmallHD on-camera monitors
Monitors that are using compatible batteries/plates can now show a percentage icon (Monitor Settings > Status Display > Show Battery Percentage)
Improvements and Alterations:
Battery Level/Voltage now appear in the Dashboard
General user interface improvements and optimizations
Bugs Fixed:
Resolved a Monitor Activation issue specific to firmware version 6.3.5
Known Issues
- Quantum 32 Waveform has sparkly artifacts in the Waveform data
- This has only been observed on a small percentage of units
Recommended Practices
Connect external recorders directly downstream of your source device (i.e. camera), not downstream of the monitor
-
Release notes & download
Show release notes Hide release notes
Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 700 Series, Other Services, Others Important Software Information: PLEASE READ BELOW
- OLDER FIRMWARE IS LISTED BELOW, CLICK “SHOW MORE”
- Click Here for a complete list of compatible monitors
- This firmware will NOT support the following monitors:
- Focus 5 & 7 (LCD, OLED, HDMI, SDI, & RX/TX)
- 2403 HDR & 2403 HB
- 1703 HDR & 1703 Studio
- 1303 Studio
- 700 Series - 701, 701L, 702 Bright, 702 OLED
- 500 Series - 501, 502, 502 Bright
- This firmware is NOT compatible with the DSMC3 RED®Touch, or Action 5
- RED® Touch users have firmware available on the RED® Touch tab
- This firmware is NOT compatible with legacy monitors (DP1, DP6, DP4, AC7, and
DP7-PRO)
- If your firmware is below 3.6.5, we recommend the following upgrade path:
3.6.5 -> 4.8.7 -> 5.5.6 -> 6.0.0 Improvements and Alterations:
- Timecode & Start/Stop Metadata can now be transmitted over Teradek Bolt links
- Changes to the White Point Offset are now shown in the Color Pipe Bugs Fixed:
- Fixed the “flashing” effect that was happening when Monitor Settings was set to Interlace > Bob (4K Production Monitors, Ultra 7, Ultra 10)
- Resolved an issue using custom False Color Maps while in Portrait Orientation
- Fixed an intermittent problem preventing Waveform data from displaying
- Dial LEDs will no longer flicker at low brightness
- Resolved an issue preventing Dial labels from appearing at times
- “Fixed Nits” option in the Color Pipe is now more accurate for 7-inch monitors
Known Issues
- Quantum 32 Waveform has sparkly artifacts in the Waveform data
- This has only been observed on a small percentage of units Recommended Practices
- Connect external recorders directly downstream of your source device (i.e. camera), not downstream of the monitor
-
Release notes & download
Show release notes Hide release notes
Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 700 Series, Other Services, Others Important Software Information: PLEASE READ BELOW
- OLDER FIRMWARE IS LISTED BELOW, CLICK “SHOW MORE”
- Click Here for a complete list of compatible monitors
- This firmware will NOT support the following monitors:
- Focus 5 & 7 (LCD, OLED, HDMI, SDI, & RX/TX)
- 2403 HDR & 2403 HB
- 1703 HDR & 1703 Studio
- 1303 Studio
- 700 Series - 701, 701L, 702 Bright, 702 OLED
- 500 Series - 501, 502, 502 Bright
- This firmware is NOT compatible with the DSMC3 RED®Touch, or Action 5
- RED® Touch users have firmware available on the RED® Touch tab
- This firmware is NOT compatible with legacy monitors (DP1, DP6, DP4, AC7, and
DP7-PRO)
- If your firmware is below 3.6.5, we recommend the following upgrade path:
3.6.5 -> 4.8.7 -> 5.5.6 -> 6.0.0 Improvements and Alterations:
- Manufacturing improvements for SmallHD on-camera monitors
Known Issues
- Quantum 32 Waveform has sparkly artifacts in the Waveform data
- This has only been observed on a small percentage of units Recommended Practices
- Connect external recorders directly downstream of your source device (i.e. camera), not downstream of the monitor
-
Release notes & download
Show release notes Hide release notes
Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 700 Series, Other Services, Others Important Software Information: PLEASE READ BELOW
- OLDER FIRMWARE IS LISTED BELOW, CLICK “SHOW MORE”
- Click Here for a complete list of compatible monitors
- This firmware will NOT support the following monitors:
- Focus 5 & 7 (LCD, OLED, HDMI, SDI, & RX/TX)
- 2403 HDR & 2403 HB
- 1703 HDR & 1703 Studio
- 1303 Studio
- 700 Series - 701, 701L, 702 Bright, 702 OLED
- 500 Series - 501, 502, 502 Bright
- This firmware is NOT compatible with the DSMC3 RED®Touch, or Action 5
- RED® Touch users have firmware available on the RED® Touch tab
- This firmware is NOT compatible with legacy monitors (DP1, DP6, DP4, AC7, and
DP7-PRO)
- If your firmware is below 3.6.5, we recommend the following upgrade path:
3.6.5 -> 4.8.7 -> 5.5.6 -> 6.0.0 Bugs Fixed:
- Resolved a connection issue between SmallHD TX monitors and Teradek receivers
- Fixed an issue where the Output Page Look Tool caused unintended visual changes on downstream monitors
- Fixed a bug in the Image Capture Tool caused by repeated captures Improvements and Alterations:
- Improved HDMI output video stability
- Improved USB Cabling Compatibility
- These monitors no longer require USB OTG cables when connecting them to other USB devices:
- 503 UltraBright
- 703 UltraBright
- 703 Bolt
- 702 Touch
- Cine 7
- Cine 7 Teradek 500 TX
- Cine 7 Teradek 500 RX
- Cine 7 Teradek SK RX
- Focus Pro
- Focus Pro OLED
- Indie 7
Known Issues
- Quantum 32 Waveform has sparkly artifacts in the Waveform data
- This has only been observed on a small percentage of units Recommended Practices
- Connect external recorders directly downstream of your source device (i.e. camera), not downstream of the monitor
-
Release notes & download
Show release notes Hide release notes
Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 700 Series, Other Services, Others Important Software Information: PLEASE READ BELOW
- OLDER FIRMWARE IS LISTED BELOW, CLICK “SHOW MORE”
- Click Here for a complete list of compatible monitors
- This firmware will NOT support the following monitors:
- Focus 5 & 7 (LCD, OLED, HDMI, SDI, & RX/TX)
- 2403 HDR & 2403 HB
- 1703 HDR & 1703 Studio
- 1303 Studio
- 700 Series - 701, 701L, 702 Bright, 702 OLED
- 500 Series - 501, 502, 502 Bright
- This firmware is NOT compatible with the DSMC3 RED®Touch, or Action 5
- RED® Touch users have firmware available on the RED® Touch tab
- This firmware is NOT compatible with legacy monitors (DP1, DP6, DP4, AC7, and
DP7-PRO)
- If your firmware is below 3.6.5, we recommend the following upgrade path:
3.6.5 -> 4.8.7 -> 5.5.6 -> 6.0.0 Features Added:
- Adds support for Fleet Control App v1.1.0 Beta Bugs Fixed:
- Smart7 monitor luminance has been corrected to the proper maximum level.
- Resolved compatibility issues with Nikon ZR and other Nikon cameras using 4K formats.
This update may also improve compatibility with additional video sources
- Fixed HDMI downstream audio when an output LUT is active. Previously, enabling a LUT on the Output Page could disable audio passthrough to downstream devices
- Improved overall signal stability and touchscreen responsiveness
- The Appearance menu on Ultra 7 and Ultra 10 monitors can now be accessed via touchscreen
- Fixed display dimming behavior when creating a new Page. The monitor will no longer enter low-power mode after one minute of inactivity immediately following Page creation
- Corrected Waveform Spot Meter behavior on 4K Production Monitors. The tool now properly highlights the selected image area
- Fixed Crosshair Tool interaction. Opening or positioning crosshairs no longer triggers on-screen Function Buttons
- Corrected menu orientation issues on 4K Production Monitors in portrait mode. Menus now display properly when control buttons are positioned on the right edge
- Fixed profile loading for Multiview layouts. Saved profiles now correctly restore Multiview Page configurations
Known Issues
- Quantum 32 Waveform has sparkly artifacts in the Waveform data
- This has only been observed on a small percentage of units Recommended Practices
- Connect external recorders directly downstream of your source device (i.e. camera), not downstream of the monitor
-
Release notes & download
Show release notes Hide release notes
Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 700 Series, Other Services, Others Important Software Information: PLEASE READ BELOW
- OLDER FIRMWARE IS LISTED BELOW, CLICK “SHOW MORE”
- Click Here for a complete list of compatible monitors
- This firmware will NOT support the following monitors:
- Focus 5 & 7 (LCD, OLED, HDMI, SDI, & RX/TX)
- 2403 HDR & 2403 HB
- 1703 HDR & 1703 Studio
- 1303 Studio
- 700 Series - 701, 701L, 702 Bright, 702 OLED
- 500 Series - 501, 502, 502 Bright
- This firmware is NOT compatible with the DSMC3 RED®Touch, or Action 5
- RED® Touch users have firmware available on the RED® Touch tab
- This firmware is NOT compatible with legacy monitors (DP1, DP6, DP4, AC7, and
DP7-PRO)
- If your firmware is below 3.6.5, we recommend the following upgrade path:
3.6.5 -> 4.8.7 -> 5.5.6 -> 6.0.0 Improvements and Alterations:
- Added support for monitor production updates
Known Issues
- Quantum 32 monitors may display visual artifacts within the Waveform Tool data
- The Sharpness slider is currently adjustable only via joystick input
- Monitor Settings > Appearance > Sharpness Recommended Practices
- Connect external recorders directly downstream of your source device (i.e. camera), not downstream of the monitor
-
Release notes & download
Show release notes Hide release notes
Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 700 Series, Other Services, Others Important Software Information: PLEASE READ BELOW
- OLDER FIRMWARE IS LISTED BELOW, CLICK “SHOW MORE”
- Click Here for a complete list of compatible monitors
- This firmware will NOT support the following monitors:
- Focus 5 & 7 (LCD, OLED, HDMI, SDI, & RX/TX)
- 2403 HDR & 2403 HB
- 1703 HDR & 1703 Studio
- 1303 Studio
- 700 Series - 701, 701L, 702 Bright, 702 OLED
- 500 Series - 501, 502, 502 Bright
- This firmware is NOT compatible with the DSMC3 RED®Touch, or Action 5
- RED® Touch users have firmware available on the RED® Touch tab
- This firmware is NOT compatible with legacy monitors (DP1, DP6, DP4, AC7, and
DP7-PRO)
- If your firmware is below 3.6.5, we recommend the following upgrade path:
3.6.5 -> 4.8.7 -> 5.5.6 -> 6.0.0 Features Added:
- Portrait UI
- The monitor now has an option to turn UI elements 90 degrees
- Settings available in the “Image Rotate” settings section
- 4K Production Monitor Video Output Improvements
- Adds support for cross conversion
- Adds support for applying a LUT to downstream SDI video
- Signal Routing Diagram shows the Input/Output routing in the Input & Output settings menu (Monitor Settings > Input & Output) Improvements and Alterations:
- Ultra 7 now has a “Max Bright” mode
- Status Display may now be shown in “Square Division” multiplex mode
- Added a more prominent warning that running display maintenance on a Quantum monitor may require re-calibrating the display afterwards
- Q27 monitors may now be set to a 1,000 nit Color Pipe
- Reworks to HDMI Output functionality
- No longer “Enable / Disable” now “ Auto / Force”
- Auto: HDMI will output so long as a downstream device is detected
- Force: HDMI will output always, even on an empty cable
- Registration Wizard now includes a QR code linking to the monitor’s Quick Start Guide
- This can also be accessed at any time via the new “Getting Started” settings section (Monitor Settings > Help > Getting Started)
- Added a “New Features” popup that displays after a firmware update Bugs Fixed:
- Improved stability of SDI 1 Video on 4K production monitors
- Ultra 7 lock switch is now respected immediately at power-on
- Improved Ultra 10 Battery Low indicator reliability
- Fixed an issue with Lift Controls on Ultra 5 monitors
- Resolved an issue with downstream HDMI audio on UltraBright monitors
- RED RCP2 Camera Control now allows toggling Record Format
- Added Native White Point measurement for VISION monitors in the Manual Calibration Wizard
- Resolved issues when receiving Record Flag from RED KOMODO and Canon C300
- Function button LUT assignment no longer clears after a restart
- Prevented an intermittent monitor crash while updating internal Teradek wireless RX/TX 4K units
- Many improvements for supporting uncommon video formats
- Beta 1 Resolved an issue with RGB Parade Waveform producing artifacts on Quantum 32 Monitors when using UHD formats
- Beta 1 Resolved an issue with the Quantum 32 Waveform producing artifacts when positioned at the top of a video Page
- Beta 1 Fixed the an issue with the Waveform Tool wrapping vertically and horizontally
- Beta 1 Prevented monitor “flicker” that could appear after long run time
- Beta 1 Quantum 32 Dials now illuminate properly after a power cycle
- RC0 RGB Gain control no longer alters peak luminance Recommended Practices
- Connect external recorders directly downstream of your source device (i.e. camera), not downstream of the monitor
-
Release notes & download
Show release notes Hide release notes
Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 700 Series, Other Services, Others Important Software Information: PLEASE READ BELOW
- OLDER FIRMWARE IS LISTED BELOW, CLICK “SHOW MORE”
- Click Here for a complete list of compatible monitors
- This firmware will NOT support the following monitors:
- Focus 5 & 7 (LCD, OLED, HDMI, SDI, & RX/TX)
- 2403 HDR & 2403 HB
- 1703 HDR & 1703 Studio
- 1303 Studio
- 700 Series - 701, 701L, 702 Bright, 702 OLED
- 500 Series - 501, 502, 502 Bright
- This firmware is NOT compatible with the DSMC3 RED®Touch, or Action 5
- RED® Touch users have firmware available on the RED® Touch tab
- This firmware is NOT compatible with legacy monitors (DP1, DP6, DP4, AC7, and
DP7-PRO)
- If your firmware is below 3.6.5, we recommend the following upgrade path:
3.6.5 -> 4.8.7 -> 5.5.6 -> 6.0.0 Features Added:
- Camera Control for Canon
- Enabled by a new Camera Control License for Canon
- Supported Cameras: C70, C80, C300 MKIII, C400, C500 MKII Bugs Fixed:
- SDI Metadata Tool behaves more consistently when using the Sony FX6
- Resolved screen flickers that occurred when using the Canon C300 Recommended Practices
- Connect external recorders directly downstream of your source device (i.e. camera), not downstream of the monitor
-
Release notes & download
Show release notes Hide release notes
Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 700 Series, Other Services, Others Important Software Information: PLEASE READ BELOW
- OLDER FIRMWARE IS LISTED BELOW, CLICK “SHOW MORE”
- Click Here for a complete list of compatible monitors
- This firmware will NOT support the following monitors:
- Focus 5 & 7 (LCD, OLED, HDMI, SDI, & RX/TX)
- 2403 HDR & 2403 HB
- 1703 HDR & 1703 Studio
- 1303 Studio
- 700 Series - 701, 701L, 702 Bright, 702 OLED
- 500 Series - 501, 502, 502 Bright
- This firmware is NOT compatible with the DSMC3 RED®Touch, or Action 5
- RED® Touch users have firmware available on the RED® Touch tab
- This firmware is NOT compatible with legacy monitors (DP1, DP6, DP4, AC7, and
DP7-PRO)
- If your firmware is below 3.6.5, we recommend the following upgrade path:
3.6.5 -> 4.8.7 -> 5.5.6 -> 6.0.0 Features Added:
- None Bugs Fixed:
- Resolved a monitor crash that was caused by assigning a Tool to a Touch Function Button (6 button layout)
- Fixed an issue that caused some text to render incorrectly Recommended Practices
- Connect external recorders directly downstream of your source device (i.e. camera), not downstream of the monitor.
-
Release notes & download
Show release notes Hide release notes
Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 700 Series, Other Services, Others Important Software Information: PLEASE READ BELOW
- OLDER FIRMWARE IS LISTED BELOW, CLICK “SHOW MORE”
- Click Here for a complete list of compatible monitors
- This firmware will NOT support the following monitors:
- Focus 5 & 7 (LCD, OLED, HDMI, SDI, & RX/TX)
- 2403 HDR & 2403 HB
- 1703 HDR & 1703 Studio
- 1303 Studio
- 700 Series - 701, 701L, 702 Bright, 702 OLED
- 500 Series - 501, 502, 502 Bright
- This firmware is NOT compatible with the DSMC3 RED®Touch, or Action 5
- RED® Touch users have firmware available on the RED® Touch tab
- This firmware is NOT compatible with legacy monitors (DP1, DP6, DP4, AC7, and
DP7-PRO)
- If your firmware is below 3.6.5, we recommend the following upgrade path:
3.6.5 -> 4.8.7 -> 5.5.6 -> 6.0.0 Features Added:
- Square Division Multiplex Signal Support
- Supporting Square Division multiplexed signals must be done by enabling the new toggle switch in the “Input & Output” settings menu
- Tools and Pages are disabled when Square Division mode is activated
- Dials may now be bound to Camera Control functions (Ultra 10, Quantum 32) Bugs Fixed:
- Resolved an issue using Calman for calibration on Vision monitors
- Resolved visible ‘dithering’ on Cine 7 introduced in the 6.1.0 update
- Improved luminance accuracy when using Judd Offset + Manual Adjustments Recommended Practices
- Connect external recorders directly downstream of your source device (i.e. camera), not downstream of the monitor.
-
Release notes & download
Show release notes Hide release notes
Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 700 Series, Other Services, Others Important Software Information: PLEASE READ BELOW
- OLDER FIRMWARE IS LISTED BELOW, CLICK “SHOW MORE”
- Click Here for a complete list of compatible monitors
- This firmware will NOT support the following monitors:
- Focus 5 & 7 (LCD, OLED, HDMI, SDI, & RX/TX)
- 2403 HDR & 2403 HB
- 1703 HDR & 1703 Studio
- 1303 Studio
- 700 Series - 701, 701L, 702 Bright, 702 OLED
- 500 Series - 501, 502, 502 Bright
- This firmware is NOT compatible with the DSMC3 RED®Touch, or Action 5
- RED® Touch users have firmware available on the RED® Touch tab
- This firmware is NOT compatible with legacy monitors (DP1, DP6, DP4, AC7, and
DP7-PRO)
- If your firmware is below 3.6.5, we recommend the following upgrade path:
3.6.5 -> 4.8.7 -> 5.5.6 -> 6.0.0 Improvements and Alterations:
- Minor hardware enhancement impacting the manufacturing of SmallHD monitors
- Simplified the customization process of User Function Dials on Quantum 32 monitors
- Renamed “Backlight” to “Luminance” to more accurately apply to all panel technologies
- Improved the “Lift” manual adjustments for post-calibration color control
- Added an explanation to the user after the monitor fails to load a custom No Signal icon
- Improved image clarity with color gradients
- Faster startup speed for on-camera monitors Bugs Fixed:
- Settled an issue causing a white flash on startup of some monitors
- Squashed a bug found in the monitor’s Calibration > Manual Adjustment setting
- Fixed a problem displaying the 0 point of Histogram when displaying full range data
- Resolved a case where an OLED 22 would not properly power down when the input voltage dropped below the allowable minimum limit
- Fixed an occasional navigation issues when using Quantum 32 capacitive touch dials
- Resolved an issue causing a “haloing effect” on some Vision 17 monitors
- Resolved an issue of minor backlight flickering on some Vision 24 monitors
-
Release notes & download
Show release notes Hide release notes
Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 700 Series, Other Services, Others Important Software Information: PLEASE READ BELOW
- OLDER FIRMWARE IS LISTED BELOW, CLICK “SHOW MORE”
- Click Here for a complete list of compatible monitors
- This firmware will NOT support the following monitors:
- Focus 5 & 7 (LCD, OLED, HDMI, SDI, & RX/TX)
- 2403 HDR & 2403 HB
- 1703 HDR & 1703 Studio
- 1303 Studio
- 700 Series - 701, 701L, 702 Bright, 702 OLED
- 500 Series - 501, 502, 502 Bright
- This firmware is NOT compatible with the DSMC3 RED®Touch, or Action 5
- RED® Touch users have firmware available on the RED® Touch tab
- This firmware is NOT compatible with legacy monitors (DP1, DP6, DP4, AC7, and
DP7-PRO)
- If your firmware is below 3.6.5, we recommend the following upgrade path:
3.6.5 -> 4.8.7 -> 5.5.6 -> 6.0.0 Improvements and Alterations:
- Simplified the customization process of User Function Dials on Quantum 32 monitors
- Renamed “Backlight” to “Luminance” to more accurately apply to all panel technologies
- Improved the “Lift” manual adjustments for post-calibration color control
- Added an explanation to the user after the monitor fails to load a custom No Signal icon
- Improved image clarity with color gradients
- Faster startup speed for on-camera monitors Bugs Fixed:
- Settled an issue causing a white flash on startup of some monitors
- Squashed a bug found in the monitor’s Calibration > Manual Adjustment setting
- Fixed a problem displaying the 0 point of Histogram when displaying full range data
- Resolved a case where an OLED 22 would not properly power down when the input voltage dropped below the allowable minimum limit
- Fixed an occasional navigation issues when using Quantum 32 capacitive touch dials
- Resolved an issue causing a “haloing effect” on some Vision 17 monitors
- Resolved an issue of minor backlight flickering on some Vision 24 monitors
-
Release notes & download
Show release notes Hide release notes
Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 700 Series, Other Services, Others Important Software Information: PLEASE READ BELOW
- OLDER FIRMWARE IS LISTED BELOW, CLICK “SHOW MORE”
- This firmware will NOT support the following monitors:
- Focus 5 & 7 (LCD, OLED, HDMI, SDI, & RX/TX)
- 2403 HDR & 2403 HB
- 1703 HDR & 1703 Studio
- 1303 Studio
- 700 Series - 701, 701L, 702 Bright, 702 OLED
- 500 Series - 501, 502, 502 Bright
- This firmware is NOT compatible with the DSMC3 RED®Touch, or Action 5
- RED® Touch users have firmware available on the RED® Touch tab
- This firmware is NOT compatible with legacy monitors (DP1, DP6, DP4, AC7, and
DP7-PRO)
- If your firmware is below 3.6.5, we recommend the following upgrade path:
3.6.5 -> 4.8.7 -> 5.5.6 -> 6.0.0 Features Added:
- Added HLG as an option in the Color Pipe
- Users may select HLG (Hybrid Log Gamma) as the HDR Electro-optical transfer function to be sent to the display
- Users may convert from LOG to HLG using their own LUT.
- Within a LOG Color Pipe, change “Convert To” to “HDR” and “Convert With” to User LUT Improvements and Alterations:
- EL Zone Tool: Content 8 stops or more above middle gray will be rendered white.
Content 8 stops or more below middle gray will be rendered black
- Custom Color Pipe Spaces
- This feature allows users to convert from any color space at all to a color space that the monitor is able to display, so long as the user loads a 3D LUT to do the conversion
- Optimized connecting to Camera Control for Sony BURANO
- The Backlight tool now notifies the user if it has been disabled by selecting a Color Pipe with a fixed luminance
- Minor language translation updates Bugs Fixed:
- Fixed an issue causing the “Output” section of the dashboard page not to update properly
- The Lift controls in the “Manual Adjustments” menu now have a much more subtle effect
- Vision 17 and Vision 24 Backlight Slider is now more granular
- Fixed a problem with Quantum 32 having an occasional stuck frame
- Fixed a bug that occurred when attempting to edit a global function button
- Fixed tool menus not appearing after connecting to a camera via camera control
-
Release notes & download
Show release notes Hide release notes
Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 700 Series, Other Services, Others Important Software Information: PLEASE READ BELOW
- OLDER FIRMWARE IS LISTED BELOW, CLICK “SHOW MORE”
- This firmware will NOT support the following monitors:
- 2403 HDR & 2403 HB
- 1703 HDR & 1703 Studio
- 1303 Studio
- 700 Series - 701, 701L, 702 Bright, 702 OLED
- 500 Series - 501, 502, 502 Bright
- This firmware is NOT compatible with the DSMC3 RED®Touch, or Action 5
- RED® Touch users have firmware available on the RED® Touch tab
- This firmware is NOT compatible with legacy monitors (DP1, DP6, DP4, AC7, and
DP7-PRO)
- If your firmware is below 3.6.5, we recommend the following upgrade path: 3.6.5 -> 4.8.7 -> 5.5.6 -> 6.0.0 Improvements and Alterations:
- Function button tools may no longer be disabled via the toolbar or tool edit menu Bugs Fixed:
- Resolved a small issue with the patch color used in Calman calibrations
- Fixed an issue preventing the luminance slider from working on Focus OLED monitors
- Connecting to an ALEXA Mini LF using a DHCP network connection will no longer crash the monitor
- Fixed an issue with digits in RED® DSMC2™ camera timecode strings sometimes appearing in hexadecimal
- Resolved an issue causing the Quantum 32 display to turn off when the active battery was removed from the Dual Battery Bracket
- Following this change, the display will turn back on after 3 seconds
- Fixed a UI layout issue when connecting to RED® DSMC2™ cameras
- Resolved an issue where LUTs would not be applied correctly on some Ultra 7 Multi-View Pages
- Resolved an instance of the calibration settings not lasting through a power cycle
- Fixed an issue where some Cine 13 monitors would show a checkered pattern on startup
- Resolved an issue that made the Quantum 32 display too dim after startup
- Resolved an issue with the luminance Fine-Tune slider where changes did not take effect until exiting and then re-entering the menu
- Resolved an issue where the Ultra 7 Multi-View Page pane may display the wrong source while being configured
- Fixed SDI input breaking when an HDMI input is selected
-
Release notes & download
Show release notes Hide release notes
Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 700 Series, Other Services, Others Important Software Information: PLEASE READ BELOW
- OLDER FIRMWARE IS LISTED BELOW, CLICK “SHOW MORE”
- This firmware will NOT support the following monitors:
- 2403 HDR & 2403 HB
- 1703 HDR & 1703 Studio
- 1303 Studio
- 700 Series - 701, 701L, 702 Bright, 702 OLED
- 500 Series - 501, 502, 502 Bright
- This firmware is NOT compatible with the DSMC3 RED®Touch, or Action 5
- RED® Touch users have firmware available on the RED® Touch tab
- This firmware is NOT compatible with legacy monitors (DP1, DP6, DP4, AC7, and
DP7-PRO)
- If your firmware is below 3.6.5, we recommend the following upgrade path: 3.6.5 -> 4.8.7 -> 5.5.6 -> 6.0.0 Features Added:
- Allow 4K Production Monitor tally/record indicator to be controlled via GPI connection
- Added support for multiplexed SDI inputs
- Support 2x6G and 4x3G 2SI encoded inputs
- Monitors are now compatible with several USB Wifi adapters
- Added support for Level B SDI Video for 4K Production Monitors
- Waveform tool added to the Quantum 32
- Sony BURANO + Sony FX6 Camera Control Support (Cine 5, Cine 7, Ultra 7, Ultra 10, Cine 13, Cine 18, Cine 24, Vision 17, Vision 24, OLED 22, OLED 27, Quantum 32)
- Added Dual View to Ultra7
- Added support for Calman integration to Quantum 32
- Added support for a new Vision algorithm (Vision 17, 24)
- Improves highlight rendering
- Improves HDR accuracy and optimizes backlight Improvements and Alterations:
- Slight improvements to Vectorscope FPS and Image Capture speed
- Updated some UI animations
- Page transition speed is now faster
- Monitor Settings > Interface > Pages
- Added support for a custom bouncing “No Video” icon
- Monitor Settings > User > Personalize
- Luminance Color Pipe Rework
- “Backlight” and “Brightness” has been replaced with the word “Luminance”
- Luminance may now be configured within a Color Pipe
- Color Pipe UI Update
- The Color Pipe UI has been updated to make the system easier to use
- The Crosshatch Tool now allows creating a denser grid
- Improved the granularity of the Zebra thresholds
- Thresholds may now be set based based on either code values or IRE
- Allow capturing two images at once, one with and one without any compatible tools
- Custom Exposure Assist Improvements
- Users may now change the background of a custom exposure map
- Options include: Grayscale, Transparent (Clean), or Spectrum
- Allow users to load custom exposure maps as an image file (1024 wide .png) from removable media
- Color Pipes now support the following additional white points: D93, D56, D60
- When function button tools are deactivated, they are removed from the toolbar
- Manual Adjustments may now be tuned per-Color-Pipe
- By default, everything will work as it did in previous versions
- Calibration settings menu now has an option to enable “manual adjustment sets”
- When exposed, there will be 8 sets of manual adjustments that may be configured on the monitor. Factory and User calibrations must each be assigned to one of those 8 sets
- Color Pipes may also be assigned to a manual adjustment set. By default, each Color Pipe will use the manual adjustment set of the current calibration. However, they can be configured to instead override that value with a different set of manual adjustments
- Function Button Tooltips now indicate function state (on vs off)
- Exposure Assist legend may now be placed vertically
- Opening the Studio Brightness menu no longer automatically displays a white patch
- Adjusted the EL Zone scale, replacing the colors of white and black with light red and dark purple
- Allow users to alter the record tally UI element’s appearance in the Metadata tool Bugs Fixed:
- Fixed bug causing User Conversion LUTs in Color Pipes to be applied incorrectly
- Resolved audio data from a BlackMagic PIX-E5 not being detected by SmallHD monitors
- Resolved interactions between the Input Tool and Image Capture on Record Start
- Camera Control - Scrubbing in playback mode on ARRI cameras no longer changes Pages
- Fixed a case of incorrect Color Pipes being applied to Multi Pages, when more than one multi-view page was present on the monitor.
- Resolved flickering on a Multi Page when receiving some PsF formats
- Fixed issues with 8 channel SDI Audio on 4K production monitors
- Fixed audio issues when more than 8 channels are present
- Super Pixel Scaling was not working, monitors continued to use interpolation
- Resolved video range issues that came about when different Color Pipes were assigned different video ranges
- Resolved discrepancies between Color Picker and Exposure Assist
- Restored the missing “Burn-in Recovery” settings element
- Lock Switches now function after reboot
- Focus Assist lines now persist after a reboot
- Focus Assist now functions correctly when bound to a function button
- Fixed rare instances of legal range video not being displayed correctly in calibration wizard
- On 4K Production Monitors, Image Overlay no longer dims the image when the source media is removed
- Fixed Low Voltage Warning sometimes not appearing
- General UI improvements
- Fixed several video format issues
- Ultra 5 TX Output toggle no longer causes wireless video issues
- Image Overlay no longer obscures aspect and safe guides
- Activating Image Capture no longer causes the color picker tool to deactivate
KNOWN (EXISTING) ISSUES
- Waveform does not work at 1080p60 on 4K production monitors
- Quantum 32 Panel Turns Off when hot-swapping batteries
- Workaround: Avoid removing the active battery, remove only the drained battery
- Quantum 32 panel is too dim on boot
- Workaround: Toggle any luminance setting after a reboot
- Connecting to an ARRI Alexa camera via camera control may crash the monitor when using DHCP
- Only applies when direct-connecting to a camera, not when using a router
- Workaround: Set the monitor’s static IP address prior to connecting
-
Release notes & download
Show release notes Hide release notes
Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 700 Series, Other Services, Others Important Software Information:
- This firmware is only compatible with Ultra 7 monitors .
Click “Show More” below to access firmware version 5.5.4 for all other monitors Features Added
- Added support for the Ultra 7 series of monitors
- Cross Conversion (HDMI->SDI and SDI->HDMI) Recommended Practices
- Connect external recorders directly downstream of your source device (i.e. camera), not downstream of the monitor
-
Release notes & download
Show release notes Hide release notes
Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 700 Series, Other Services, Others Important Software Information:
- This firmware will NOT support Ultra 7 and the following monitors:
- Ultra 7
- 1703 HDR
- 2403 HDR
- 2403 HB
- 1703 Studio
- 1303 Studio
- 702 OLED
- 701 Light
- 701
- 702 Bright
- 501
- 502
- 502 Bright
- This firmware is NOT compatible with the DSMC3 RED®Touch, Action 5, or Ultra 7
- RED® Touch users have OS 5 available on the RED® Touch tab
- This firmware is NOT compatible with legacy monitors (DP1, DP6, DP4, AC7, and DP7-PRO) Improvements and Alterations:
- Resolves a bug present on a few 4K monitors that would occasionally prevent the waveform from functioning Recommended Practices
- Connect external recorders directly downstream of your source device (i.e. camera), not downstream of the monitor
-
Release notes & download
Show release notes Hide release notes
Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 700 Series, Other Services, Others Important Software Information:
- This firmware will NOT support the following monitors:
- Ultra 7
- 1703 Studio
- 701
- 1703 HDR
- 1303 Studio
- 702 Bright
- 2403 HDR
- 702 OLED
- 501
- 2403 HB
- 701 Light
- 502
- 502 Bright
- This firmware is NOT compatible with the DSMC3 RED®Touch, Action 5, or Ultra 7
- RED® Touch users have OS 5 available on the RED® Touch tab
- This firmware is NOT compatible with legacy monitors (DP1, DP6, DP4, AC7, and DP7-PRO) Bugs Fixed
- The Auto Rotate toggle is no longer missing from the Settings Menu for 5 and 7-inch SmallHD monitors (Monitor Settings > Image Rotate > Auto Rotate)
- The Shotover Gimbal Overlay has been made available again in the Tools Menu Recommended Practices
- Connect external recorders directly downstream of your source device (i.e. camera), not downstream of the monitor
-
Release notes & download
Show release notes Hide release notes
Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 700 Series, Other Services, Others Important Software Information:
- This firmware will NOT support the following monitors:
- Ultra 7
- 1703 Studio
- 701
- 1703 HDR
- 1303 Studio
- 702 Bright
- 2403 HDR
- 702 OLED
- 501
- 2403 HB
- 701 Light
- 502
- 502 Bright
- This firmware is NOT compatible with the DSMC3 RED®Touch, Action 5, or Ultra 7
- RED® Touch users have OS 5 available on the RED® Touch tab
- This firmware is NOT compatible with legacy monitors (DP1, DP6, DP4, AC7, and DP7-PRO) Features Added:
- Added “Static Video Areas” option to the Ultra 5 TX
- Monitor Settings > Teradek > Static Video Areas Improvements and Alterations:
- Teradek Bolt 4K & Bolt 6 Various Fixes
- Ultra 5 monitors now support Teradek Bolt 6 and Ace 750
- Added Japan region support for Ultra 5 and Smart 7 Monitors Modules Recommended Practices
- Connect external recorders directly downstream of your source device (i.e. camera), not downstream of the monitor
-
Release notes & download
Show release notes Hide release notes
Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 700 Series, Other Services, Others Important Software Information:
- This firmware will NOT support the following monitors:
- 1703 HDR
- 2403 HDR
- 2403 HB
- 1703 Studio
- 1303 Studio
- 702 OLED
- 701 Light
- 701
- 702 Bright
- 501
- 502
- 502 Bright
- This firmware is NOT compatible with the DSMC3 RED®Touch or Action 5
- RED® Touch users have OS 5 available on the RED® Touch tab
- This firmware is NOT compatible with legacy monitors (DP1, DP6, DP4, AC7, and DP7-PRO) Bugs Fixed:
- Fixed problem with the user Warranty Registration process Recommended Practices
- Connect external recorders directly downstream of your source device (i.e. camera), not downstream of the monitor
-
Release notes & download
Show release notes Hide release notes
Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 700 Series, Other Services, Others Important Software Information:
- This firmware will NOT support the following monitors:
- 1703 HDR
- 2403 HDR
- 2403 HB
- 1703 Studio
- 1303 Studio
- 702 OLED
- 701 Light
- 701
- 702 Bright
- 501
- 502
- 502 Bright
- This firmware is NOT compatible with the DSMC3 RED®Touch or Action 5
- RED® Touch users have OS 5 available on the RED® Touch tab
- This firmware is NOT compatible with legacy monitors (DP1, DP6, DP4, AC7, and DP7-PRO) Improvements and Alterations:
- Improved wireless device support
- Updated compliance statements
- RCP2 Camera Control: Improve transition speed to and from Playback Mode Bugs Fixed:
- Resolved minor issues with the Color Picker tool
- Color Picker will no longer display incorrect values on Focus Pro SDI and Focus OLED SDI
- Color Picker now works when the Crop & Scale Tool is used.
- Resolved issues with the 1303 Production Monitor function buttons
- The Auto Recover Setting of the power menu is now saved through power cycle Recommended Practices
- Connect external recorders directly downstream of your source device (i.e. camera), not downstream of the monitor
-
Release notes & download
Show release notes Hide release notes
Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 700 Series, Other Services, Others Important Software Information:
- This firmware will NOT support the following monitors:
- 1703 HDR
- 2403 HDR
- 2403 HB
- 1703 Studio
- 1303 Studio
- 702 OLED
- 701 Light
- 701
- 702 Bright
- 501
- 502
- 502 Bright
- This firmware is NOT compatible with the DSMC3 RED®Touch or Action 5
- RED® Touch users have OS 5 available on the RED® Touch tab
- This firmware is NOT compatible with legacy monitors (DP1, DP6, DP4, AC7, and DP7-PRO) Features Added:
- Added Camera Control support for ARRI ALEXA 35
- Compatible with camera software update package 1.2 and prior (SUP 1.2.0)
- Sony VENICE 2 is now supported by the VENICE camera control license
- Sony VENICE and VENICE 2 now support wireless camera control
- Added support for Ethernet camera control of RCP2 and DSMC2 RED cameras
- Burn-In Recover Mode
- Adds a new settings section under "Display" that allows the user to trigger a burn-in recovery sequence, which cycles the panel through a color pattern to fix image retention
- Monitor Settings > Display > Burn-In Recover
- SmallHD 4K Production Monitors now support camera control licenses for ARRI, RED and Sony cameras Improvements and Alterations:
- Improved 703 UltraBright calibration system.
- All previous calibration LUTs created on 703 UB monitors will be altered with this update, we recommend re-calibrating on the new firmware. This will not affect monitors that have never had a user calibration LUT loaded
- Added support for Blackmagic log BMDFilm and BMDFilm 4K
- These formats now work with the EL Zone Tool
- Improved IP connection for camera control menus
- 4K monitors now display LUT names in the user button label when a Look Tool is assigned to a user button
- Smart 5 Monitors can now perform camera control when tethered via USB to a stand-alone Teradek Bolt 4K or Bolt 6 transmitter or receiver. Previously only Smart 7 monitors supported this feature
- Smart 7 Wireless Modules now work on Cine 7 500 TX, Cine 7 500 RX
- Updated ARRI style Exposure Assist to support LogC4
- GPI pin numbers were updated to match RJ45 standards. This will not alter the behavior of previously assigned GPI functions Bugs Fixed:
- Custom Calibrations are now assignable to Color Pipe 8
- Image Captures should no longer save corrupted frames
- AUTO range selection now defers to the expected range of the selected LOG format
- Previously, users using Sony log formats needed to force the Color Pipe to FULL; now the color should be accurate even when leaving the Color Pipe to the default "AUTO" setting
- Resolved issues with LUTs not rendering properly on multiview
- Image captures should now be scaled correctly on 720p monitors
- Calman Integration: Resolved issues setting the monitor's white and black levels
- Switching the input range of incoming video now updates the range of the Waveform Tool legend. Previously the Waveform Tool needed to be toggled off and back on
- Fixed an issue using Legal range video in the 4K production monitor Calibration Wizard
- Camera Control - DSMC2 "playback" menu now shows the stop button
- Enlarged the size of the white point / black point color patch on small monitors
- Resolved issues with the Waveform spot meter when using scaled video
- Vision Series monitor 2 pass calibration now saves even if the user skips applying LUTs
- Resolved issues in the Zebra Tool when thresholds were set below 0 or above 100 IRE
- Resolved several issues regarding toolbar scrolling through multiple tools
- Resolved visible gap between the waveform data and waveform legend
- HDR mode and Max Bright mode can no longer be enabled simultaneously
- Aspect Guide is no longer offset from the edge of the panel by 1 pixel on the Indie 7
- Improved interactions between the Color Picker Tool and Pixel Zoom
- Assigning Livegrade Tool to a function button now works as intended
- Color Picker Tool location menu can now be closed via a touchscreen even when a scope overlaps the 'back' button location Known Issues in Release 5.5.0:
- The Color Picker Tool may not work as intended in some circumstances
- Color Picker may not display correct values on Focus Pro SDI or Focus OLED
SDI
- Color Picker does not work when the Crop & Scale Tool is used. This bug is not specific to any monitor Recommended Practices
- Connect external recorders directly downstream of your source device (i.e. camera), not downstream of the monitor
-
Release notes & download
Show release notes Hide release notes
Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 700 Series, Other Services, Others
SPECIAL NOTES FOR THIS FIRMWARE
- This firmware will NOT support the following monitors. - 1703 HDR
- 2403 HDR
- 2403 HB
- 1703 Studio
- 1303 Studio
- 702 OLED
- 701 Light
- 701
- 702 Bright
- 501
- 502
- 502 Bright
- This firmware is NOT compatible with the DSMC3 RED®Touch or Action 5
- RED® Touch users have OS 5 available on the RED® Touch tab
- This firmware is NOT compatible with legacy monitors (DP1, DP6, DP4, AC7, and DP7-PRO) Features Added:
- Added F-Log2 support for the EL Zones Exposure Assist Tool
- Added Canon C-Log 1, 2 and 3 support for the EL Zones Exposure Assist Tool
- Added new “System Info” settings section under the “System” category - Displays the monitor’s cumulative run-time
- Displays the monitor’s serial number
- Displays the monitor’s current firmware version
- Displays a “System Code” to be used for manufacturing purposes Improvements and Alterations:
- Vision 24 monitors will now tolerate lower voltages before shutting down - The shutdown threshold has been lowered from 26.9V to 19V Bugs Fixed:
- Improved accuracy of some LOG conversions
- Resolved a bug with tool positioning on 4K Production Monitors
- Resolved a bug that caused the joystick to be unresponsive within the first few moments of turning on the monitor
- The Zebra Tool now functions properly when set to IRE values less than 0 or greater than 100
- Resolved a bug that allowed Tool legends to be drawn too large on Multi-View Pages
- Resolved a bug causing Profile Names to be truncated to only a few characters
- Resolved a potential monitor crash when loading Monitor Profiles Known Issues in Release 5.4.1:
- HDR mode and Max Bright mode can be enabled together
- Image Capture may not work as expected on PQ Color Pipes - The raw input data is captured using image capture. The overlaid image is NOT subject to the Color Pipe, it’s assumed that all images being overlaid are already in the same color space as the calibration target
- Smart 5 Monitors can’t perform wireless camera control through standalone Teradek Bolts
- Bolt 6 XT and LT Units don’t work with Camera Control
- When receiving LOG video from the Sony VENICE, the EL Zone colors may be wrong - Workaround: Instead of leaving the “Video Range” on “AUTO”, change it to “FULL
-
Release notes & download
Show release notes Hide release notes
Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 700 Series, Other Services, Others
SPECIAL NOTES FOR THIS FIRMWARE
- This firmware will NOT support the following monitors. - 1703 HDR
- 2403 HDR
- 2403 HB
- 1703 Studio
- 1303 Studio
- 702 OLED
- 701 Light
- 701
- 702 Bright
- 501
- 502
- 502 Bright
- This firmware is NOT compatible with the DSMC3 RED®Touch or Action 5
- RED® Touch users have OS 5 available on the RED® Touch tab
- This firmware is NOT compatible with legacy monitors (DP1, DP6, DP4, AC7, and DP7-PRO) Improvements and Alterations:
- Improved EL Zone Accuracy
- Wireless Pairing Improvements
- Users now have options to avoid overwriting existing monitor profiles - Users may choose to overwrite the existing profile, or automatically append a number to the new profile name to make it unique
- Users now also have the option of including a timestamp in profile names
- Monitor Settings > User > Profiles
- Added “Quiet Mode” option on the SmallHD Smart 5 Series - Monitor Settings > User > Fan (Smart 5 monitor only)
- Low Voltage warning is now more functional - Instead of a large popup, it now triggers the text “LOW” to appear in the status-bar area of the display. This text will appear even if the status bar is not enabled
- Improved ARRI LogC4 Handling - Added more built-in manufacturer LUT options when converting LogC4 to SDR and HDR using the Color Pipe
- “ARRI Wide Gamut” changed to “ARRI Wide Gamut 3”
- Improved HDMI output robustness Bugs Fixed:
- Resolved an issue when applying a conversion LUT via the Look Tool - Results now correctly match when loading a conversion LUT through either the Color Pipe or as a Look Tool
- Look Tool no longer shows the Livegrade option when it is not available
- Smart 7 Image Capture no longer saves as 1920x972 instead of 1920x1080
- Fixed an issue with the patch size during integrated Calman calibration
- Sending an invalid SDI signal to the monitor will no longer cause other valid SDI inputs to flicker
- RCP2 Camera Control - Camera Mode can now be changed via the joystick Known Issues in Release 5.4.0:
- HDR mode and Max Bright mode can be enabled together
- Image Capture may not work as expected on PQ Color Pipes - The raw input data is captured using image capture. The overlaid image is NOT subject to the Color Pipe, it’s assumed that all images being overlaid are already in the same color space as the calibration target
- Teradek Bolt 6 XT/LT units do not support wireless camera control
- When receiving Log video from the Sony VENICE, the EL Zone colors may be wrong - Workaround: Instead of leaving the “Video Range” on “AUTO”, change it to “FULL
-
Release notes & download
Show release notes Hide release notes
Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 700 Series, Other Services, Others
SPECIAL NOTES FOR THIS FIRMWARE
- This firmware will NOT support the following monitors. - 1703 HDR
- 2403 HDR
- 2403 HB
- 1703 Studio
- 1303 Studio
- 702 OLED
- 701 Light
- 701
- 702 Bright
- 501
- 502
- 502 Bright
- This firmware is NOT compatible with the DSMC3 RED®Touch or Action 5
- RED® Touch users have OS 5 available on the RED® Touch tab
- This firmware is NOT compatible with legacy monitors (DP1, DP6, DP4, AC7, and DP7-PRO) Features Added:
- Added new “Thermal” EL Zone style Exposure Assist (Add New Tool > Exposure Assist > Style > Thermal El Zone)
- EL Zone legend order may now be reversed to show darker values on the left (“Flip Color Scale” toggle within the EL Zone Exposure Assist Tool)
- Added GPI triggered functions for 4K Production Monitors. Each GPI input may now be configured as if it were a function button. Grounding the line triggers the corresponding function. The GPI functions can be configured through the function button menu, accessible through the monitor settings page (Monitor Settings > User Buttons > GPI Pins Improvements and Alterations:
- Added Rec2020 as a gamut option for SDR Color Pipes
- DCI-P3 gamut is no longer removed from the Color Pipe when calibrated to Rec709
- Reduce SDI locking times to Known Issues in Release 5.3.0:
- HDR mode and Max Bright mode can be enabled together - Work around: Disable Max Bright mode before switching to an input configured for HDR
- Sending an invalid SDI signals to the monitor may cause other valid SDI inputs to flicker - Work around 1: If using two or fewer SDI signals, do not place them on adjacent inputs
- Work around 2: Unplug any SDI cables not being used to transmit video
- Image Capture may not work as expected on PQ Color Pipes - The raw input data is captured using image capture. The overlaid image is NOT subject to the Color Pipe, it’s assumed that all images being overlaid are already in the same color space as the calibration target
- CalMAN integration has not been finalized and fully validated Bugs Fixed:
- Focus OLED, Focus OLED SDI, Focus PRO OLED displays are now the proper brightness
- Video no longer occasionally turns black when the “Transition Speed” setting is set to Instant
- Tool location on the legend is no longer incorrect on Smart 7 monitors
- Fixed alignment of the Smart 7 Histogram Tool
- Fixed functionality of the Backlight Tool
- Fixed Color Picker area boxes, which were getting drawn when the tool was inactive
- Fixed issues that could occur when multiple Color Picker tools on a Page were active
- Fixed input elements not showing as green when they are active in the Smart 5/Smart 7 input popup
- Fixed rendering of the Camera Control menu when “Surround View” is changed to OFF
- Full Range SDI no longer produces sparkles/clipping on 4K Monitors
- 4K Monitors no longer hang when the scroll wheel is used while adjusting a Tool location
- Image rotate settings are now preserved through power cycle on Smart 5/Smart 7
- Fixed artifacts in Vectorscope data when receiving legal range video
- Teradek RT Overlay Tool improvements - No longer displays metric scale briefly before switching to the correct units
- No long hangs after disconnecting from the RT device
- Peaking no longer stays enabled after the tool has been turned off
- Cine 7 TX now transmits 4K video correctly, video is no longer purple
- Factory reset now properly clears custom backdrops on Smart 7 monitors
-
Release notes & download
Show release notes Hide release notes
Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 700 Series, Other Services, Others Monitors Not Compatible with v5.2.1:
- Focus OLED, Focus OLED SDI, and Focus Pro OLED
- Firmware v5.0.1 can be used for the monitors listed above (located here )
- This firmware is NOT compatible with the DSMC3 RED® Touch or Action 5 RED® Touch users have OS 5 available on the RED® Touch tab
- This firmware is NOT compatible with legacy monitors (DP1, DP6, DP4, AC7, and DP7-PRO) Firmware Update Best Practices:
- SD card 2,4,8,16GB - SD Card Format:
- FAT32 for Windows
- MS-DOS (FAT) for macOS
- Ensure that only one “.bin” file is on the SD card
- Backup your profile before update (recommended)
- Use AC power or fully charged battery
- Note older version of firmware before update Features Added:
- None Improvements and Alterations:
- Manufacturing update Known Issues in Release 5.2.1:
- Image Capture may not work as expected on PQ Color Pipes - The raw input data is captured using image capture. The overlaid image is NOT subject to the color pipe, it’s assumed that all images being overlaid are already in the same color space as the calibration target
- CalMAN integration has not been finalized and fully validated
- Color Picker values are off by a small percentage - Expected to be resolved in firmware version 5.3.0
-
Release notes & download
Show release notes Hide release notes
Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 700 Series, Other Services, Others Monitors Not Compatible with v5.2.0:
- Focus OLED, Focus OLED SDI, and Focus Pro OLED
- Firmware v5.0.1 can be used for the monitors listed above (located here )
- This firmware is NOT compatible with the DSMC3 RED® Touch or Action 5 RED® Touch users have OS 5 available on the RED® Touch tab
- This firmware is NOT compatible with legacy monitors (DP1, DP6, DP4, AC7, and DP7-PRO) Firmware Update Best Practices:
- SD card 2,4,8,16GB - SD Card Format:
- FAT32 for Windows
- MS-DOS (FAT) for macOS
- Ensure that only one “.bin” file is on the SD card
- Backup your profile before update (recommended)
- Use AC power or fully charged battery
- Note older version of firmware before update Features Added:
- Support for the Shotover addon on 4K Production Monitors - Does not support sending overlays downstream
- Added Shotover addon back to 1300/1700/2400 Series Production Monitors
- Added the ability to change Page animation speed - Settings-> Interface-> Pages (options are 1x, 2x, 3x, instant) Improvements and Alterations:
- Added Max Bright mode to Smart 5 monitors Bugs Fixed:
- Fixed a bug breaking user registration, which caused monitor token to display as “UNKNOWN”
- Resolved pairing issues with the FOCUS 7 wireless monitors
- Switching inputs between HDMI and SDI no longer requires restarting the Vision 24
- Resolved update failures on the Smart 7 4K Wireless Modules
- ARRI IP menu now works with a joystick on Smart 5 monitors
- Resolved video artifacts (sparkles, incorrect colors) when using Full Range SDI
- Resolved issue with ARRI standby light indicator using camera control for ARRI
- Resolved issue with ARRI tree menu not updating when media inserted
- Resolved flashing of Sony FX9 Record Flag when camera was not recording
- Peaking Tool’s Brightness & Contrast settings are now preserved through power cycle
- Fixed a bug that would cause monitor page state to not save through power cycle
- Soft Function Buttons: Cycle zoom level now works properly
- Smart 7 output now works with 1080i50 and 1080i60
- Smart 7 output no longer breaks after switching input from 4k to 2k/1080p
- HDMI output now works on 10-bit formats for 4K Production Monitors Known Issues in Release 5.2.0:
- Image Capture may not work as expected on PQ color pipes - The raw input data is captured using image capture. The overlaid image is NOT subject to the color pipe, it’s assumed that all images being overlaid are already in the same color space as the calibration target.
- CalMAN integration has not been finalized and fully validated
- Color Picker values are off by a small percentage - Expected to be resolved in firmware version 5.3.0 Recommended Practices
- Connect external recorders directly downstream of your source device (i.e. camera), not downstream of the monitor .
-
Release notes & download
Show release notes Hide release notes
Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 700 Series, Other Services, Others Firmware Update Best Practices
- SD card 2,4,8,16GB
- SD Card Format:
- FAT32 for Windows
- MS-DOS (FAT) for macOS
- Ensure that only one “.bin” file is on the SD card
- Backup your profile before update (recommended)
- Use AC power or fully charged battery
- Note older version of firmware before update Firmware Compatibility:
- This firmware is NOT compatible with the DSMC3 RED® Touch or Action 5
- RED® Touch users have OS 5 available on the RED® Touch tab
- This firmware is NOT compatible with legacy monitors (DP1, DP6, DP4, AC7, and DP7-PRO) Features Added:
- Monitor firmware now supports the new Bolt 6 Monitor Module for Smart 7 monitors Known Issues in Release 5.1.1:
- Image Capture may not work as expected on PQ color pipes
- The raw input data is captured using image capture. The overlaid image is NOT subject to the color pipe, it’s assumed that all images being overlaid are already in the same color space as the calibration target.
- CalMAN integration has not been finalized and fully validated
- Camaro monitors do not work with 10 bit video from a Murideo color generator
- Workaround: Use a different source
- Switching Inputs causes the Vision 24 monitor to start flickering continuously
- Workaround: Restart the monitor
- May only exhibit the issue when the two inputs are of different resolution & frame rate
- 4K Production Monitors do not output 10-bit HDMI video
- Workaround: Use 8 or 12-bit video
- Shotover Addon does not work on the 5.1.1 release
- Color picker values are off by a small percentage Recommended Practices
- Connect external recorders directly downstream of your source device (i.e. camera), not downstream of the monitor .
-
Release notes & download
Show release notes Hide release notes
Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 700 Series, Other Services, Others Firmware Compatibility:
- This firmware is NOT compatible with the DSMC3 RED® Touch or Action 5
- RED® Touch users have OS 5 available on the RED® Touch tab
- This firmware is NOT compatible with legacy monitors (DP1, DP6, DP4, AC7, and DP7-PRO) Bugs Fixed:
- Global Anamorphic Tool no longer risks crashing the monitor
Known Issues
- Image Capture may not work as expected on PQ Color Pipes (will not be resolved in 5.0)
- The raw input data is captured using image capture. The overlaid image is NOT subject to the Color Pipe, it’s assumed that all images being overlaid are already in the same color space as the calibration target.
- CalMAN integration has not been finalized and fully validated
- 4K Production Monitors do not work with 10-bit video from a Murideo color generator
- Switching Inputs may cause the VISION 24 monitor to start flickering continuously
- Workaround: Restart the monitor
- May only exhibit the issue when the two inputs are of different resolution & frame rate
- 4K Monitors do not output 10-bit HDMI video
- Workaround: Use 8 or 12 bit video
- 12bpc SDI formats do not display correctly on our monitors
- Workaround: Use a different bit depth
- ARRI Camera Control will crash if the ARRI CAP Password is incorrect when connecting to the monitor.
- Shotover Addon does not work on the 5.0.1 release Recently Added with 5.0.0 Released 9-1-2022 Firmware Compatibility:
- This firmware is NOT compatible with the DSMC3 RED® Touch or Action 5
- RED® Touch users have OS 5 available on the RED® Touch tab
- This firmware is NOT compatible with legacy monitors (DP1, DP6, DP4, AC7, and DP7-PRO) Features Added:
- Look-Around Camera Control (Adjust camera control and SmallHD tools at the same time)
- HDMI Out enabled for 4K Production Monitors (allows adding a 3D LUT to Output)
- Multi-View on 4K Production Monitors
- VISION monitors support dual-view
- All other 4K production monitors support up to quad-view
- Added a Horizon Indicator Tool (Add Tool > Frame > Horizon Level)
- EL Zone Tool
- Option in the Exposure Assist tool. Only works when using a LOG Color Pipe
- Color Pipe is set in settings menu page
- Image Capture can’t currently capture the EL Zone tool
- Added Touch Screen Function Buttons to touch screen monitors
- Customize / Enable / Disable in settings menu
- Added Input Tool, allows assigning a specific input to a video page
- Active/paired Teradek Bolt 4K transmitters can now be assigned to a function button
- Allows using function buttons to change between paired transmitters
- Switched from tri-linear to tetrahedral LUT interpolation on 4K Production Monitors
- Added support for 33pt Calibration LUTs on 4K Production Monitors
- 4K Production Monitor Speakers are now functional
- Added configurable low voltage warning on 4K Production Monitors
- Color Pipes can be assigned to function buttons
- Allow users to assign unique calibrations to Color Pipes
- Added RT Overlay Marks
- Set marks with your RT hand controller Improvements and Alterations:
- 4K Monitor improved upscaling; should result in crisper display of 1080p video
- Users may choose between two upscaling methods.
- SETTINGS -> APPEARANCE -> Super Pixels vs Cubic Interpolation - Super Pixels: Attempts to preserve the appearance of the lower resolution content
- Cubic Interpolation: Attempts to ensure the upscaled video data is smooth
- Performance improvements when switching between Color Pipes
- Updated RED Log3G10 LUT
- Improved OLED 27 battery switching, should drain both batteries before dying
- Added UI indication when a monitor is outputting a video format that an attached 4K TX wireless module will NOT be able to transmit
- Unassigned function buttons can now be configured to perform no action on press
- Added Dashboard Page shortcut to function button assignments
- Increased backlight control granularity From 20% steps to 5% steps
- Modified Waveform axis for clarity when showing code values on legal range data
- Dropping calibration saturation to 0 now results in a grayscale image
- Add LOG Color Pipes to ALL monitors (required for EL Zone Tool)
- Added option to disable Battery Plate accessory power.
- Disabling battery plate accessory power will fix Cine13 and OLED22 whining noise at low voltage levels
- Improved Vectorscope Performance
- Removed UI rotate option from 4K Production Monitors
- Video flip, rotate, still work on 4K Production Monitors
- Multi-View panes can not yet be individually flipped/rotated
- Updated ARRI LOG conversion support
- Added support for ARRI LOGC4
- Updated conversion LUTs for LOGC->SDR and LOGC->HDR
- Custom backdrops are now removed by a factory reset Bugs Fixed:
- Smart 7 Monitors no longer have artifacts when combining Crop & Scale with rotation
- Fixed issues receiving 4K video from some HDMI sources
- Improved behavior of add new page menu
- KOMODO Camera Control no longer prevents iris changes while recording
- Fixed issue where Smart 7 touchscreen would occasionally stop responding
- 4K Production Monitor Max Brightness Mode now disables all color conversions
- Fixed issues with the waveform data not being aligned to the legend
- Fixed issue where the pixel zoom settings menu didn’t scroll
- USB keyboards can be used to control monitors via USB cable
- Pressing the back button can no longer activate the UI Lock feature on a 4K Production Monitor (Settings > Interface > UI Lock)
- RCP2 Camera Control: Auto Focus menu no longer opens without an AF lens
- Improved stability of Image Gallery
- Removed signal strength indicator from 4K TX wireless menu
- SD Card will be the default capture location as soon as a card is inserted
- Most significant for 4K Production Monitors, which would otherwise save to internal storage
- Removed function button elements from 1300/1700 Series Production Monitor Input UI Popup
- Fixed bug causing profile load to fail if profile > 1MB
- Waveform ROI data is no longer rendered in the wrong color
- Exiting the Calibration menu no longer leaves Custom Calibration selected unless a new calibration was created. Aborting early will leave the calibration menu in the original state
- Fixed issue with OLED 22 Judd Offset being applied when the toggle was off
- 4K Production Monitor EDID now reports user-facing monitor names. Customers will see this when they send HDMI from a computer.
- Fixed 4K Production Monitor Waveform not displaying on DCI-4K Video
- Color Pipe EI menu now properly scrolls
- Color Picker Active/Inactive state now preserved through power cycle
- Last Clip Info now available wirelessly on RX monitor (camera control)
- Fixed several bugs regarding downstream video
- Fixed alignment of Guides & Video Content
- 65-point LUT files now load correctly
- Decreased delay on 4K Production Monitors when locking onto SDI video through a video router
Known Issues
- Image Capture may not work as expected on PQ Color Pipes (will not be resolved in 5.0) - The raw input data is captured using image capture. The overlaid image is NOT subject to the Color Pipe, it’s assumed that all images being overlaid are already in the same color space as the calibration target.
- CalMAN integration has not been finalized and fully validated
- 4K Production Monitors do not work with 10-bit video from a Murideo color generator
- Switching Inputs may cause the VISION 24 monitor to start flickering continuously - Workaround: Restart the monitor
- May only exhibit the issue when the two inputs are of different resolution & frame rate
- 4K Monitors do not output 10-bit HDMI video - Workaround: Use 8 or 12 bit video
- 12bpc SDI formats do not display correctly on our monitors - Workaround: Use a different bit depth
- ARRI Camera Control will crash if the ARRI CAP Password is incorrect when connecting to the monitor.
-
Release notes & download
Show release notes Hide release notes
Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 700 Series, Other Services, Others Firmware update Best practices:
- SD card 2,4,8,16GB
- Backup your profile before update (recommended)
- Use AC power or fully charged battery
- Note older version of firmware before update Firmware Compatibility:
- This firmware is NOT compatible with the DSMC3 RED® Touch or Action 5
- PageOS 4 is NOT compatible with legacy monitors (DP1, DP6, DP4, AC7, and DP7-PRO) Hardware Updates:
- Manufacturing update Special Notes:
- After updating to 4.8.6 or later, reverting to prior firmware WILL NOT be possible for all 4K Production Monitors Recommended Practices
- Connect third party external recorders directly downstream of your source device (i.e. camera), not downstream of the monitor
-
Release notes & download
Show release notes Hide release notes
Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 700 Series, Other Services, Others Firmware update Best practices:
- SD card 2,4,8,16GB
- Backup your profile before update (recommended)
- Use AC power or fully charged battery
- Note older version of firmware before update Firmware Compatibility:
- This firmware is NOT compatible with the DSMC3 RED® Touch or Action 5
- PageOS 4 is NOT compatible with legacy monitors (DP1, DP6, DP4, AC7, and DP7-PRO) Hardware Updates:
- Manufacturing update Special Notes:
- After updating to 4.8.6, reverting to prior firmware WILL NOT be possible for all 4K Production Monitors Recommended Practices
- Connect third party external recorders directly downstream of your source device (i.e. camera), not downstream of the monitor
-
Release notes & download
Show release notes Hide release notes
Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 700 Series, Other Services, Others Firmware update Best practices:
- SD card 2,4,8,16GB
- Backup your profile before update (recommended)
- Use AC power or fully charged battery
- Note older version of firmware before update Firmware Compatibility:
- PageOS 4 is compatible with all current SmallHD monitors
- PageOS 4 is not compatible with legacy monitors (DP1, DP6, DP4, AC7, and DP7-PRO)
- This firmware is not compatible with the DSMC3 RED® Touch Hardware Updates:
- Support for the OLED 27 4K Reference Monitor
Bug Fixes
- Resolved SDI locking issue on 4K Production Monitors
- Resolved UI navigation issue when pressing back in the Color Pipe Menu Recommended Practices
- Connect third party external recorders directly downstream of your source device (i.e. camera), not downstream of the monitor
-
Release notes & download
Show release notes Hide release notes
Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 700 Series, Other Services, Others Firmware update Best practices:
- SD card 2,4,8,16GB
- Backup your profile before update (recommended)
- Use AC power or fully charged battery
- Note older version of firmware before update Firmware Compatibility:
- PageOS 4 is compatible with all current SmallHD monitors
- PageOS 4 is not compatible with legacy monitors (DP1, DP6, DP4, AC7, and DP7-PRO)
- This firmware is not compatible with the DSMC3 RED® Touch Improvements and Alterations:
- Maintenance update for SmallHD production practices.
Recommended Practices
- Connect third party external recorders directly downstream of your source device (i.e. camera), not downstream of the monitor
-
Release notes & download
Show release notes Hide release notes
Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 700 Series, Other Services, Others Firmware update Best practices:
- SD card 2,4,8,16GB
- Backup your profile before update (recommended)
- Use AC power or fully charged battery
- Note older version of firmware before update Firmware Compatibility:
- PageOS 4 is compatible with all current SmallHD monitors
- PageOS 4 is not compatible with legacy monitors (DP1, DP6, DP4, AC7, and DP7-PRO)
- This firmware is not compatible with the DSMC3 RED® Touch Bugs Fixed:
- Modifying the monitor’s white point by using either the Calibration Manual Offsets or by using the Color Pipe will now apply the same shift to values that were clipped due to exceeding the panel’s HDR capabilities.
- Fixed an issue that could result in incorrect colors appearing on the display.
- Fixed an issue that would cause VISION 4K Production Monitors to occasionally power up either too dim or too bright.
Recommended Practices
- Connect third party external recorders directly downstream of your source device (i.e. camera), not downstream of the monitor
-
Release notes & download
Show release notes Hide release notes
Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 700 Series, Other Services, Others Firmware update Best practices:
- SD card 2,4,8,16GB
- Backup your profile before update (recommended)
- Use AC power or fully charged battery
- Note older version of firmware before update Firmware Compatibility:
- PageOS 4 is compatible with all current SmallHD monitors
- PageOS 4 is not compatible with legacy monitors (DP1, DP6, DP4, AC7, and DP7-PRO)
- This firmware is not compatible with the DSMC3 RED® Touch Features Added:
- 4K Production Monitor headphone support - Cine 13, Cine 24, OLED 22 Improvements and Alterations:
- Actual Data Range now shown on dashboard - No longer shows inaccurate information on dashboard page
- Color Pipe Improvement - PQ Video data is now allowed to be configured as Legal Range in a Color Pipe
- Expanded SDI functionality - SDI “Full Range” is not 0-1023, but rather 4-1019. It’s referred to as “SDI FULL” in the monitor, and is assumed to be the case if “FULL” data range is selected when receiving SDI video Bugs Fixed:
- White point conversion is no longer broken in SDR. In HDR, out-of-range data will still clip to the calibration LUT target white point, rather than the white point of the Color Pipe
- Judd Offset toggle state no longer affects Calibration Wizard
- Headphone volume no longer resets to zero after power cycle
- Camera Control Shutter & WB options no longer default to the top of the list
- Image Capture menu no longer broken when scrolling past “delay on record start”
- 4K Wireless module fixes:
- Resolved issues with 4K Wireless Modules selecting fixed frequencies
- Removed “Fan Off On Record” from TX module settings menu
- Fixes the 14” and 20” lens ring Teradek RT Overlay Recommended Practices
- Connect third party external recorders directly downstream of your source device (i.e. camera), not downstream of the monitor
-
Release notes & download
Show release notes Hide release notes
Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 700 Series, Other Services, Others Firmware update Best practices:
- SD card 2,4,8,16GB
- Backup your profile before update (recommended)
- Use AC power or fully charged battery
- Note older version of firmware before update Firmware Compatibility:
- PageOS 4 is compatible with all current SmallHD monitors
- PageOS 4 is not compatible with legacy monitors (DP1, DP6, DP4, AC7, and DP7-PRO)
- This firmware is not compatible with the DSMC3 RED® Touch Features Added:
- Adds camera control for RED® V-Raptor™ to KOMODO® Camera control license
- Wireless Camera Control for DSMC2 for Smart 7 Series Monitors (Bolt 4K Monitor Modules Required)
- 4K Production Monitors now displays Analog Fuel Gauge from Smart Anton-Bauer Batteries Improvements and Alterations:
- Improved color accuracy of image captures
- Firmware updates now allow spaces in the update file name
- 4K Production Monitors' function button backlights now illuminate. Brightness can be controlled via the Settings Menu
- No Signal background color is now black instead of grey
- Color Pipe options added for specifying desired RGB<->YCC transfer matrix - Auto: chooses matrix as specified by video metadata
- Use Gamut: chooses matrix associated with the selected input gamut
- Allows forcing 601, 709, 2020
- Available only on 4K Production Monitors Bugs Fixed:
- Function button assignments now consistently select the correct tool
- Fixed Indie 7, 702 Touch headphone volume bug
- Smart 7 Series output info box displayed 1080p when the output is actually 2160p
- Improved the UI design of FOCUS monitors to better reveal the calibration button
- Fixed bugs with bi-directional video signal output behavior on 703 monitors
- Cinema mode no longer uses the same brightness as Studio mode
- Factory Reset now properly resets any manual adjustments made to the factory calibration
- Fixed an interaction between Pixel Zoom and the “Size & Position” tool
- Fixed OLED 22 crash caused by changing brightness mode
- 503 UltraBright display can no longer be turned off with the backlight tool
- Fixed a bug in the Bolt 4K Module pairing process
- Backlight brightness no longer changes during image capture when a backlight tool is applied to the current page
- UI Lock can no longer be triggered during an image capture
- Fixed bug that caused monitor to crash while adding the Livegrade or SHOTOVER Tool
- Calibration “Manual Adjustments” menu will now always show video when open Recommended Practices
- Connect third party external recorders directly downstream of your source device (i.e. camera), not downstream of the monitor
-
Release notes & download
Show release notes Hide release notes
Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 500 Series, FOCUS - 700 Series, Others, Other Services Firmware update Best practices:
- SD card 2,4,8,16GB
- Backup your profile before update (recommended)
- Use AC power or fully charged battery
- Note older version of firmware before update Firmware Compatibility:
- PageOS 4 is compatible with all current SmallHD monitors
- PageOS 4 is not compatible with legacy monitors (DP1, DP6, DP4, AC7, and DP7-PRO) Features Added:
- Wireless Camera Control for RED® KOMODO™
- Allow user LUTs for Color Pipe conversions
- Added an optional delay to Image Capture on record Improvements and Alterations:
- Miscellaneous improvements to Bolt 4K Monitor Module user interface
- Blocked Channel list selection no longer changes
- Fixed Channel selection Bugs Fixed:
- Fixed video alignment on Indie 7, Focus 7 models
- Fixed a bug that would occasionally invalidate the first calibration performed on a 4K production monitor after the monitor was booted. Would not have occurred if the monitor was in a factory default state before calibration begins New Bugs:
- Waveform sometimes artifacts on YCC data if Waveform is at the top of the Page
- Smart 7 Monitor (702 Touch, Indie 7, Cine 7) Output Page indicates downstream video always 1080 resolution, even when the downstream video is UHD Recently Added (via V4.7.0):
- Wireless Camera Control for the ARRI MINI, Alexa, MINI LF is now supported when using the Bolt 4K TX Module + Bolt 4K RX Module
- Must have a Cine 7 monitor on the TX side
- At least one monitor in the chain needs an ARRI license for the wireless camera control to work
- Disable remote camera control in the TX monitor’s settings menu, you can also enable a PIN requirement for connection
- Only a single RX can access wireless camera control at a time. Video still works, but camera control only works with a single TX, RX pair
- Added LOG > HDR conversions to 4K production monitors
- Currently, this feature does NOT allow using a custom LUT
- Added Judd offset toggle to calibration menu on OLED monitors
- Judd Modification explanation
- Monitor now displays a QR code during initial registration
- Support for the Bolt 4K Monitor Module 1500 TX and 1500 RX (Coming Soon)
- Compatible with SmallHD Smart 7 Monitors Recommended Practices
- Connect third party external recorders directly downstream of your source device (i.e. camera), not downstream of the monitor
-
Release notes & download
Show release notes Hide release notes
Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 500 Series, FOCUS - 500 Wireless Series, FOCUS - 700 Series, Others, Other Services Firmware update Best practices:
- SD card 2,4,8,16GB
- Backup your profile before update (recommended)
- Use AC power or fully charged battery
- Note older version of firmware before update Firmware Compatibility:
- PageOS 4 is compatible with all current SmallHD monitors
- PageOS 4 is not compatible with legacy monitors (DP1, DP6, DP4, AC7, and DP7-PRO) Features Added:
- Wireless Camera Control for the ARRI MINI, Alexa, MINI LF is now supported when using the Bolt 4K TX Module + Bolt 4K RX Module
- Must have a Cine 7 monitor on the TX side
- At least one monitor in the chain needs an ARRI license for the wireless camera control to work
- Disable remote camera control in the TX monitor’s settings menu, you can also enable a PIN requirement for connection
- Only a single RX can access wireless camera control at a time. Video still works, but camera control only works with a single TX, RX pair
- Added LOG > HDR conversions to 4K production monitors
- Currently, this feature does NOT allow using a custom LUT
- Added Judd offset toggle to calibration menu on OLED monitors
- Judd Modification explanation
- Monitor now displays a QR code during initial registration
- Support for the Bolt 4K Monitor Module 1500 TX and 1500 RX (Coming Soon)
- Compatible with SmallHD Smart 7 Monitors Improvements and Alterations:
- 4K production monitor default power button brightness lowered from 10 to 5
- Improved Color Picker Accuracy
- Improved the Calibration Manual Adjustments UI
- Added an option to display raw code values in the waveform
- Improved keyboard integration control Bugs Fixed:
- Teradek RT Overlay now supported on 4K production monitors
- Cine 7 Crosshair and Image Overlay were not always centered
- 4K production monitors would recognize PSF formats as interlaced
- Image Capture setting “Capture LUTs” now saved through power cycle
- Fixed a bug that may have caused registered monitors to ask for user registration at power on
- 4K production monitors’ power button brightness no longer initializes to the wrong value
- Bidirectional SDI outputs no longer get disabled
- Studio & Cinema backlight setting accuracy improved on Cine 13
- Fixed Frequency on Cine 7 4K Modules always defaulted to the first list item after power up New Bugs:
- Waveform sometimes artifacts on YCC data if Waveform is at the top of the Page
- Smart 7 - Output Page indicates downstream video always 1080, even when the downstream video is UHD Recommended Practices
- Connect third party external recorders directly downstream of your source device (i.e. camera), not downstream of the monitor
-
Release notes & download
Show release notes Hide release notes
Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 700 Series, Other Services, Others Firmware update Best practices:
- SD card 2,4,8,16GB
- Backup Profile before update (recommended)
- Use AC power or fully Charged battery
- Note older version of firmware before update Firmware Compatibility:
- PageOS 4 is compatible with all current SmallHD monitors
- PageOS 4 is not compatible with legacy monitors (DP1, DP6, DP4, AC7, and DP7-PRO) Features Added:
- Support for the Bolt 4K Monitor Module 1500 TX and 1500 RXCompatible with SmallHD Smart 7 Monitors Recently Added (v4.6.5):
- Fixed issues in the Bolt 4K Monitor ModulesPrevented a critical bug that would cause modules to require an update via BoltManager if a standard software update failed Fixed various read / write settings controlled via the Bolt IOS App Fixed block channel read & write Changing settings from the Bolt iOS APP or the Monitor UI should be more consistent and reliable Fix for fixed frequency settings issue following a bandwidth change
- Teradek Bolt 4K Monitor Module update now available Recommended Practices
- Connect third party external recorders directly downstream of your source device (i.e. camera), not downstream of the monitor
-
Release notes & download
Show release notes Hide release notes
Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 500 Series, FOCUS - 500 Wireless Series, FOCUS - 700 Series, Others, Other Services Firmware update Best practices:
- SD card 2,4,8,16GB
- Backup Profile before update (recommended)
- Use AC power or fully Charged battery
- Note older version of firmware before update Firmware Compatibility:
- PageOS 4 is compatible with all current SmallHD monitors
- PageOS 4 is not compatible with legacy monitors (DP1, DP6, DP4, AC7, and DP7-PRO) Features Added:
- Support for the Cine 13 4K High-bright Production Monitor Improvements and Alterations:
- Improved the calibration LUT for Indie 7 monitors that will remove panel discoloration from some monitors Recently Added (v4.6.5):
- Fixed issues in the Bolt 4K Monitor Modules
- Prevented a critical bug that would cause modules to require an update via BoltManager if a standard software update failed
- Fixed various read / write settings controlled via the Bolt IOS App
- Fixed block channel read & write
- Changing settings from the Bolt iOS APP or the Monitor UI should be more consistent and reliable
- Fix for fixed frequency settings issue following a bandwidth change
- Teradek Bolt 4K Monitor Module update now available Recommended Practices
- Connect third party external recorders directly downstream of your source device (i.e. camera), not downstream of the monitor
-
Release notes & download
Show release notes Hide release notes
Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 500 Series, FOCUS - 500 Wireless Series, FOCUS - 700 Series, Others, Other Services Firmware update Best practices:
- SD card 2,4,8,16GB
- Backup Profile before update (recommended)
- Use AC power or fully Charged battery
- Note older version of firmware before update Firmware Compatibility:
- PageOS 4 is compatible with all current SmallHD monitors
- PageOS 4 is not compatible with legacy monitors (DP1, DP6, DP4, AC7, and DP7-PRO)
Bug Fixes
- Fixed issue with monitor auto flip/rotate feature Recently Added (v4.6.5):
- Fixed issues in the Bolt 4K Monitor Modules
- Prevented a critical bug that would cause modules to require an update via BoltManager if a standard software update failed
- Fixed various read / write settings controlled via the Bolt IOS App
- Fixed block channel read & write
- Changing settings from the Bolt iOS APP or the Monitor UI should be more consistent and reliable
- Fix for fixed frequency settings issue following a bandwidth change
- Teradek Bolt 4K Monitor Module update now available Recommended Practices
- Connect third party external recorders directly downstream of your source device (i.e. camera), not downstream of the monitor
-
Release notes & download
Show release notes Hide release notes
Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 500 Series, FOCUS - 500 Wireless Series, FOCUS - 700 Series, Others, Other Services Firmware update Best practices:
- SD card 2,4,8,16GB
- Backup Profile before update (recommended)
- Use AC power or fully Charged battery
- Note older version of firmware before update Firmware Compatibility:
- PageOS 4 is compatible with all current SmallHD monitors
- PageOS 4 is not compatible with legacy monitors (DP1, DP6, DP4, AC7, and DP7-PRO)
- Latest compatible Teradek Bolt 4K Monitor Module firmware (v4.2.3): https://teradek.com/pages/downloads#bolt4k Bugs Fixed
- Fixed issues in the Bolt 4K Monitor ModulesPrevented a critical bug that would cause modules to require an update via BoltManager if a standard software update failed Fixed various read / write settings controlled via the Bolt IOS App Fixed block channel read & write Changing settings from the Bolt iOS APP or the Monitor UI should be more consistent and reliable Fix for fixed frequency settings issue following a bandwidth change Recommended Practices
- Bolt 4K Monitor Modules should be updated to the latest firmware (Monitor Settings > Teradek Bolt 4K > Update Firmware)
- Connect third party external recorders directly downstream of your source device (i.e. camera), not downstream of the monitor
-
Release notes & download
Show release notes Hide release notes
Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 500 Series, FOCUS - 500 Wireless Series, FOCUS - 700 Series, Others, Other Services Firmware update Best practices:
- SD card 2,4,8,16GB
- Backup Profile before update (recommended)
- Use AC power or fully Charged battery
- Note older version of firmware before update Firmware Compatibility:
- Cine 7 monitors running v4.6.4 will not be able to downgrade to v4.6.2 or 4.6.3
- PageOS 4 is compatible with all current SmallHD monitors
- PageOS 4 is not compatible with legacy monitors (DP1, DP6, DP4, AC7, and DP7-PRO) Improvements & Alterations
- Manufacturing change for Cine 7 500 TX, SK RX, and 500 RX monitors Recommended Practices
- Connect third party external recorders directly downstream of your source device (i.e. camera), not downstream of the monitor
-
Release notes & download
Show release notes Hide release notes
Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 500 Series, FOCUS - 500 Wireless Series, FOCUS - 700 Series, Others, Other Services Firmware update Best practices:
- SD card 2,4,8,16GB
- Backup Profile before update (recommended)
- Use AC power or fully Charged battery
- Note older version of firmware before update Firmware Compatibility:
- PageOS 4 is compatible with all current SmallHD monitors.
- PageOS 4 is not compatible with legacy monitors (DP1, DP6, DP4, AC7, and DP7-PRO).
Features Added
- Custom Page TemplatesA new feature that allows saving any page’s current configuration as a template.
Templates may be given custom names, and one of 12 different icons. Custom created templates may be deleted from the “Add New Page” menu. Improvements & Alterations
- OLED 22 Gamma is much more accurate in the dark shadows.
- 4K Production Monitor SDI Deep Color and 4:4:4 support: SDI now supports 10/12-bit 4:4:4 RGB/YCC formats. This includes 12-bit 4:2:2, 12-bit 4:4:4 RGB/YCC, 10-bit 4:4:4:4 RGB/YCC, 10-bit 4:4:4 RGB/YCC for 1.5G, 3G, 6G, and 12G SDI.
- Bolt 4k RX Monitor Modules may now have their firmware upgraded through the SD Card. Firmware to be provided by Teradek .
Bugs Fixed
- Monitors set to a “Custom Calibration” will now retain that configuration through a power cycle (4.6.0 bug).
- 4K Production Monitor SDI Metadata tool should now function appropriately.
- 4K Production Monitor Audio Meters should now function on SDI.
- Studio Mode brightness is no longer broken on OLED monitors. OLED 22 monitor brightness can now be lowered to have a 100 Nit white point. This should correspond to Studio Mode with a Fine Tune value of 50, the default Studio Mode value.
Recommended Practices
- Connect third party external recorders directly downstream of your source device (i.e. camera), not downstream of the monitor.
-
Release notes & download
Show release notes Hide release notes
Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 500 Series, FOCUS - 500 Wireless Series, FOCUS - 700 Series, Others, Other Services Firmware update Best practices:
- SD card 2,4,8,16GB
- Backup Profile before update (recommended)
- Use AC power or fully Charged battery
- Note older version of firmware before update Firmware Compatibility:
- PageOS 4 is compatible with all current SmallHD monitors.
- PageOS 4 is not compatible with legacy monitors (DP1, DP6, DP4, AC7, and DP7-PRO).
Bugs Fixed
- Fixed Camera Control for RED® DSMC2® Shutter Control.
- Exposure Assist Function Button no longer hangs monitor.
- HD Production Monitor and UltraBright on-camera monitor WRX battery display no longer shows second battery.
Recommended Practices
- Connect third party external recorders directly downstream of your source device (i.e. camera), not downstream of the monitor.
-
Release notes & download
Show release notes Hide release notes
Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 500 Series, FOCUS - 500 Wireless Series, FOCUS - 700 Series, Others SmallHD PageOS 4 Firmware v4.5.0 December 23, 2020
CHANGELOG
Firmware update Best practices:
- SD card 2,4,8,16GB
- Backup Profile before update (recommended)
- Use AC power or fully Charged battery
- Note older version of firmware before update Firmware Compatibility:
- PageOS 4 is compatible with all current SmallHD monitors.
- PageOS 4 is not compatible with legacy monitors (DP1, DP6, DP4, AC7, and DP7-PRO).
Features Added:
- 4K Production Monitor Waveform Improvements and Alterations:
- CineZone False Color: It’s named “Spectrum 2” in the Exposure Assist menu
- File Browser now has a Back Button
- Disabled diagonal inputs on 4K Production Monitor Joysticks
- Peaking now disabled on ALL image captures, regardless of how they are triggered
- 4K Production Monitor Specific: Look tool LUTs are preserved through power cycle, even if the SD card is removed.
Bugs Fixed
- None Recently Added
- Camera Control for RED® KOMODO™ bug fix (4.4.3)
- 4K Production Monitor Support Livegrade integration - https://kb.pomfort.com/livegrade/setting-up-devices/smallhd-monitor-support-in-livegrade/ Recommended Practices
- Connect third party external recorders directly downstream of your source device (i.e. camera), not downstream of the monitor.
-
Release notes & download
Show release notes Hide release notes
Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 500 Series, FOCUS - 500 Wireless Series, FOCUS - 700 Series, Others, Other Services Control for RED® KOMODO™ Fix Firmware update Best practices:
- SD card 2,4,8,16GB
- Backup Profile before update (recommended)
- Use AC power or fully Charged battery
- Note older version of firmware before update Firmware Compatibility:
- PageOS 4 is compatible with all current SmallHD monitors.
- PageOS 4 is not compatible with legacy monitors (DP1, DP6, DP4, AC7, and DP7-PRO).
Improvements and Alterations:
- Camera Control support added for KOMODO Firmware Build 1.4.0. Previous versions of SmallHD monitor firmware do not function with this build of KOMODO firmware.
Bugs Fixed
- None Recommended Practices
- Connect third party external recorders directly downstream of your source device (i.e. camera), not downstream of the monitor.
-
Release notes & download
Show release notes Hide release notes
Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 500 Series, FOCUS - 500 Wireless Series, FOCUS - 700 Series, Others, Other Services Firmware update Best practices:
- SD card 2,4,8,16GB
- Backup Profile before update (recommended)
- Use AC power or fully Charged battery
- Note older version of firmware before update Firmware Compatibility:
- PageOS 4 is compatible with all current SmallHD monitors.
- PageOS 4 is not compatible with legacy monitors (DP1, DP6, DP4, AC7, and DP7-PRO).
Bugs Fixed: 1:1 Scale Bug Fixes Recommended Practices
- Connect third party external recorders directly downstream of your source device (i.e. camera), not downstream of the monitor.
-
Release notes & download
Show release notes Hide release notes
Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 500 Series, FOCUS - 500 Wireless Series, Focus - 700 Pro Series, FOCUS - 700 Series, Others, Other Services Firmware update Best practices:
- SD card 2,4,8,16GB
- Backup Profile before update (recommended)
- Use AC power or fully Charged battery
- Note older version of firmware before update Firmware Compatibility:
- PageOS 4 is compatible with all current SmallHD monitors.
- PageOS 4 is not compatible with legacy monitors (DP1, DP6, DP4, AC7, and DP7-PRO).
Features Added: Integration with Pomfort Livegrade on Cine 24 and OLED 22 monitors.
- A new “Livegrade” tool is available under the addons menu.
- Connecting to Livegrade works just like a Teradek Colr. (Pending Livegrade update 5.3 in mid November)
- Set up instructions : LINK Cine 7 RX & TX now both support the 4K RX Module.
- The internal wireless BOLT 1080p can not be used while the 4K module is attached.
Dashboard Page Rework
- Now can be added and removed like any other page, but is always fixed to be immediately to the right of the Settings Page. May not be renamed.
- Shows much more information regarding input details, Color Pipe, Calibration, and Backlight Settings.
- Only allows changing the active input. Does not allow any other adjustments.
Anamorphic Values may now be <1 (for those portrait shooters out there). New HDR Tools added to the following monitors (Cine 24, OLED 22, 1703 P3X, 1303 HDR, 503 UltraBright, 703 UltraBright, 703 Bolt) HDR False Color
- False Color Legend now displays nits when viewing HDR data.
- There is now an option to highlight video data our monitor cannot display.
- HDR Zebra
- Limits are now specified in nits when viewing HDR data.
- HDR Histogram
- Axis are labeled in nits when displaying HDR video.
- Display limits are shown as vertical bars, indicating what data will be clipped when shown on the display.
Bugs Fixed: RED® KOMODO™ camera connections will no longer fail for the first 12 seconds after a USB cable is detected. Static IP address behavior Fixes
- Addresses the issue where IP addresses with any field between 8 and 100 would not behave properly.
The Backlight tool no longer displays Studio & Cinema mode options when they are not valid for the monitor. Selecting them used to cause a crash. PQ Data Range will no longer sometimes be incorrect.
- When the user selected a PQ color pipe, the monitor would not update the data range configuration.
Cine 7 Studio Values Corrected back to what they were on v4.2.0 and prior.
Check Boxes in tree menus (Teradek RT, Camera Control) are no longer broken.
Shotover & Teradek RT tools no longer appear on monitors without USB.
Manual Adjustments: Gamma Shift Fixes (Gamma Shift now only applies to the corresponding calibration).
RED® KOMODO™, many small fixes:
- Connection warning now displays when no USB Serial device is detected.
- LUT selection in tree menu now works.
Custom shutter options are now retained.
- Playback: PREV / NEXT buttons now skip unplayable clips.
- RCP2 timecode leaf now works in tree menu.
Static IP Address Fixes
- Previously, the monitor would not claim its assigned static IP address unless the user selected the “IP Address” button in the IP ADDRESS settings menu.
Fixed bugs that could cause Firmware Details popup to appear unexpectedly. Fixed a potential crash when saving profiles. Improvements and Alterations: Settings Button Snap-Back behavior:
- Pressing the Settings button (or any page button) snaps directly to that page. Pressing it a second time jumps back to the original location. This option now lapses after 5 minutes instead of 5 seconds.
After a factory reset, Date & Time need to be reset. We now use a different prompt for this, versus when the monitor has not yet been registered. Media Browser can now delete items. Media Browser can now create folders. Histogram Axis are now labeled. At least 0 and 100 IRE are labeled. 1:1 Viewing
- Crop & Scale tool now has an easy “1:1” setting. This will scale up video that’s a larger resolution than the display, and scale down video that’s a smaller resolution.
- Pixel Zoom now stops at the 1:1 viewing ratio if it happens to pass by it when moving from one scale factory to another. For example, if viewing 4K video on a UHD display, the 1:1 ratio is somewhere in between 1x and 2x. So when a customer first zoom in using Pixel Zoom, it will stop at “1:1.” If they zoom in further, it will progress to “2x zoom.” Recommended Practices
- Connect third party external recorders directly downstream of your source device (i.e. camera), not downstream of the monitor.
-
Release notes & download
Show release notes Hide release notes
Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 500 Series, FOCUS - 500 Wireless Series, Focus - 700 Pro Series, FOCUS - 700 Series, Others, Other Services Firmware update Best practices:
- SD card 2,4,8,16GB
- Backup Profile before update (recommended)
- Use AC power or fully Charged battery
- Note older version of firmware before update Firmware Compatibility:
- PageOS 4 is compatible with all current SmallHD monitors.
- PageOS 4 is not compatible with legacy monitors (DP1, DP6, DP4, AC7, and DP7-PRO).
Features Added: Integration with Pomfort Livegrade on Cine 24 and OLED 22 monitors.
- A new “Livegrade” tool is available under the addons menu.
- Connecting to Livegrade works just like a Teradek Colr. (Pending Livegrade update 5.3 in mid November)
- Set up instructions : LINK Cine 7 RX & TX now both support the 4K RX Module.
- The internal wireless BOLT 1080p can not be used while the 4K module is attached.
Dashboard Page Rework
- Now can be added and removed like any other page, but is always fixed to be immediately to the right of the Settings Page. May not be renamed.
- Shows much more information regarding input details, Color Pipe, Calibration, and Backlight Settings.
- Only allows changing the active input. Does not allow any other adjustments.
Anamorphic Values may now be <1 (for those portrait shooters out there). New HDR Tools added to the following monitors (Cine 24, OLED 22, 1703 P3X, 1303 HDR, 503 UltraBright, 703 UltraBright, 703 Bolt) HDR False Color
- False Color Legend now displays nits when viewing HDR data.
- There is now an option to highlight video data our monitor cannot display.
- HDR Zebra
- Limits are now specified in nits when viewing HDR data.
- HDR Histogram
- Axis are labeled in nits when displaying HDR video.
- Display limits are shown as vertical bars, indicating what data will be clipped when shown on the display.
Bugs Fixed: RED® KOMODO™ camera connections will no longer fail for the first 12 seconds after a USB cable is detected.
The Backlight tool no longer displays Studio & Cinema mode options when they are not valid for the monitor.
Selecting them used to cause a crash.
PQ Data Range will no longer sometimes be incorrect.
- When the user selected a PQ color pipe, the monitor would not update the data range configuration.
Cine 7 Studio Values Corrected back to what they were on v4.2.0 and prior.
Check Boxes in tree menus (Teradek RT, Camera Control) are no longer broken.
Shotover & Teradek RT tools no longer appear on monitors without USB.
Manual Adjustments: Gamma Shift Fixes (Gamma Shift now only applies to the corresponding calibration).
RED® KOMODO™, many small fixes:
- Connection warning now displays when no USB Serial device is detected.
- LUT selection in tree menu now works.
Custom shutter options are now retained.
- Playback: PREV / NEXT buttons now skip unplayable clips.
- RCP2 timecode leaf now works in tree menu.
Static IP Address Fixes
- Previously, the monitor would not claim its assigned static IP address unless the user selected the “IP Address” button in the IP ADDRESS settings menu.
Fixed bugs that could cause Firmware Details popup to appear unexpectedly. Fixed a potential crash when saving profiles. Improvements and Alterations: Settings Button Snap-Back behavior:
- Pressing the Settings button (or any page button) snaps directly to that page. Pressing it a second time jumps back to the original location. This option now lapses after 5 minutes instead of 5 seconds.
After a factory reset, Date & Time need to be reset. We now use a different prompt for this, versus when the monitor has not yet been registered. Media Browser can now delete items. Media Browser can now create folders. Histogram Axis are now labeled. At least 0 and 100 IRE are labeled. 1:1 Viewing
- Crop & Scale tool now has an easy “1:1” setting. This will scale up video that’s a larger resolution than the display, and scale down video that’s a smaller resolution.
- Pixel Zoom now stops at the 1:1 viewing ratio if it happens to pass by it when moving from one scale factory to another. For example, if viewing 4K video on a UHD display, the 1:1 ratio is somewhere in between 1x and 2x. So when a customer first zoom in using Pixel Zoom, it will stop at “1:1.” If they zoom in further, it will progress to “2x zoom.” New Bugs:
Static IP address assignment does not behave reliably
- Workaround: For each field of the IP address, only use values that are either greater than 100 or less than 8. For example: 192.168.1.4, NOT 192.168.1.12 Recommended Practices
- Connect third party external recorders directly downstream of your source device (i.e. camera), not downstream of the monitor.
-
Version
4.3.3First seen Jul 11, 2026Release notes & downloadShow release notes Hide release notes
Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 500 Series, FOCUS - 500 Wireless Series, Focus - 700 Pro Series, FOCUS - 700 Series Firmware update Best practices
- SD card 2,4,8,16GB.
- Backup Profile before update (recommended).
- Use AC power or fully Charged battery.
- Note older version of firmware before update.
Bugs Fixed
- Skipping “HDR Range” during calibration and then applying a PQ HDR color pipe no longer causes the monitor display to turn black.
-
Release notes & download
Show release notes Hide release notes
Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 500 Series, FOCUS - 500 Wireless Series, Focus - 700 Pro Series, FOCUS - 700 Series, Others Firmware update Best practices
- SD card 2,4,8,16GB.
- Backup Profile before update (recommended).
- Use AC power or fully Charged battery.
- Note older version of firmware before update.
Bugs Fixed
- Cine 7 SK RX Monitors will now correctly accept Camera Control for RED® licenses.
- Control for RED® DSMC2®.
- Fixed ISO Menu.
- FPS Menu now shows the current selection when opened.
-
Release notes & download
Show release notes Hide release notes
Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 700 Series, Others Firmware update Best practices:
- SD card 2,4,8,16GB
- Backup your profile before update (recommended)
- Use AC power or fully charged battery
- Note older version of firmware before update Firmware Compatibility:
- PageOS 3 is not compatible with legacy monitors (DP1, DP6, DP4, AC7, and DP7-PRO) Bugs Fixed:
- Fixed Support For WB on Mini LF (Cine 7 Camera Control).
Recommended Practices
- Connect external recorders directly downstream of your source device (i.e. camera), not downstream of the monitor.
Watch the PageOS for updates
Get an email the moment SmallHD publishes new firmware. Just your email — no account or password needed.