SmallHD PageOS firmware v5.0.1

Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 700 Series, Other Services, Others Firmware Compatibility:

• This firmware is NOT compatible with the DSMC3 RED® Touch or Action 5
• RED® Touch users have OS 5 available on the RED® Touch tab
• This firmware is NOT compatible with legacy monitors (DP1, DP6, DP4, AC7, and DP7-PRO) Bugs Fixed:
• Global Anamorphic Tool no longer risks crashing the monitor

Known Issues

• Image Capture may not work as expected on PQ Color Pipes (will not be resolved in 5.0​)
• The raw input data is captured using image capture. The overlaid image is NOT subject to the Color Pipe, it’s assumed that all images being overlaid are already in the same color space as the calibration target.
• CalMAN integration has not been finalized and fully validated
• 4K Production Monitors do not work with 10-bit video from a Murideo color generator
• Switching Inputs may cause the VISION 24 monitor to start flickering continuously
• Workaround: Restart the monitor
• May only exhibit the issue when the two inputs are of different resolution & frame rate
• 4K Monitors do not output 10-bit HDMI video
• Workaround: Use 8 or 12 bit video
• 12bpc SDI formats do not display correctly on our monitors
• Workaround: Use a different bit depth
• ARRI Camera Control will crash if the ARRI CAP Password is incorrect when connecting to the monitor.
• Shotover Addon does not work on the 5.0.1 release Recently Added with 5.0.0 Released 9-1-2022 Firmware Compatibility:
• This firmware is NOT compatible with the DSMC3 RED® Touch or Action 5
• RED® Touch users have OS 5 available on the RED® Touch tab
• This firmware is NOT compatible with legacy monitors (DP1, DP6, DP4, AC7, and DP7-PRO) Features Added:
• Look-Around Camera Control (Adjust camera control and SmallHD tools at the same time)
• HDMI Out enabled for 4K Production Monitors (allows adding a 3D LUT to Output)
• Multi-View on 4K Production Monitors
• VISION monitors support dual-view
• All other 4K production monitors support up to quad-view
• Added a Horizon Indicator Tool (Add Tool > Frame > Horizon Level)
• EL Zone Tool
• Option in the Exposure Assist tool. Only works when using a LOG Color Pipe
• Color Pipe is set in settings menu page
• Image Capture can’t currently capture the EL Zone tool
• Added Touch Screen Function Buttons to touch screen monitors
• Customize / Enable / Disable in settings menu
• Added Input Tool, allows assigning a specific input to a video page
• Active/paired Teradek Bolt 4K transmitters can now be assigned to a function button
• Allows using function buttons to change between paired transmitters
• Switched from tri-linear to tetrahedral LUT interpolation on 4K Production Monitors
• Added support for 33pt Calibration LUTs on 4K Production Monitors
• 4K Production Monitor Speakers are now functional
• Added configurable low voltage warning on 4K Production Monitors
• Color Pipes can be assigned to function buttons
• Allow users to assign unique calibrations to Color Pipes
• Added RT Overlay Marks
• Set marks with your RT hand controller Improvements and Alterations:
• 4K Monitor improved upscaling; should result in crisper display of 1080p video
• Users may choose between two upscaling methods.
• SETTINGS -> APPEARANCE -> Super Pixels vs Cubic Interpolation - Super Pixels: Attempts to preserve the appearance of the lower resolution content
• Cubic Interpolation: Attempts to ensure the upscaled video data is smooth
• Performance improvements when switching between Color Pipes
• Updated RED Log3G10 LUT
• Improved OLED 27 battery switching, should drain both batteries before dying
• Added UI indication when a monitor is outputting a video format that an attached 4K TX wireless module will NOT be able to transmit
• Unassigned function buttons can now be configured to perform no action on press
• Added Dashboard Page shortcut to function button assignments
• Increased backlight control granularity From 20% steps to 5% steps
• Modified Waveform axis for clarity when showing code values on legal range data
• Dropping calibration saturation to 0 now results in a grayscale image
• Add LOG Color Pipes to ALL monitors (required for EL Zone Tool)
• Added option to disable Battery Plate accessory power.
• Disabling battery plate accessory power will fix Cine13 and OLED22 whining noise at low voltage levels
• Improved Vectorscope Performance
• Removed UI rotate option from 4K Production Monitors
• Video flip, rotate, still work on 4K Production Monitors
• Multi-View panes can not yet be individually flipped/rotated
• Updated ARRI LOG conversion support
• Added support for ARRI LOGC4
• Updated conversion LUTs for LOGC->SDR and LOGC->HDR
• Custom backdrops are now removed by a factory reset Bugs Fixed:
• Smart 7 Monitors no longer have artifacts when combining Crop & Scale with rotation
• Fixed issues receiving 4K video from some HDMI sources
• Improved behavior of add new page menu
• KOMODO Camera Control no longer prevents iris changes while recording
• Fixed issue where Smart 7 touchscreen would occasionally stop responding
• 4K Production Monitor Max Brightness Mode now disables all color conversions
• Fixed issues with the waveform data not being aligned to the legend
• Fixed issue where the pixel zoom settings menu didn’t scroll
• USB keyboards can be used to control monitors via USB cable
• Pressing the back button can no longer activate the UI Lock feature on a 4K Production Monitor (Settings > Interface > UI Lock)
• RCP2 Camera Control: Auto Focus menu no longer opens without an AF lens
• Improved stability of Image Gallery
• Removed signal strength indicator from 4K TX wireless menu
• SD Card will be the default capture location as soon as a card is inserted
• Most significant for 4K Production Monitors, which would otherwise save to internal storage
• Removed function button elements from 1300/1700 Series Production Monitor Input UI Popup
• Fixed bug causing profile load to fail if profile > 1MB
• Waveform ROI data is no longer rendered in the wrong color
• Exiting the Calibration menu no longer leaves Custom Calibration selected unless a new calibration was created. Aborting early will leave the calibration menu in the original state
• Fixed issue with OLED 22 Judd Offset being applied when the toggle was off
• 4K Production Monitor EDID now reports user-facing monitor names.​ Customers will see this when they send HDMI from a computer.
• Fixed 4K Production Monitor Waveform not displaying on DCI-4K Video
• Color Pipe EI menu now properly scrolls
• Color Picker Active/Inactive state now preserved through power cycle
• Last Clip Info now available wirelessly on RX monitor (camera control)
• Fixed several bugs regarding downstream video
• Fixed alignment of Guides & Video Content
• 65-point LUT files now load correctly
• Decreased delay on 4K Production Monitors when locking onto SDI video through a video router

Known Issues

• Image Capture may not work as expected on PQ Color Pipes (will not be resolved in 5.0) - The raw input data is captured using image capture. The overlaid image is NOT subject to the Color Pipe, it’s assumed that all images being overlaid are already in the same color space as the calibration target.
• CalMAN integration has not been finalized and fully validated
• 4K Production Monitors do not work with 10-bit video from a Murideo color generator
• Switching Inputs may cause the VISION 24 monitor to start flickering continuously - Workaround: Restart the monitor
• May only exhibit the issue when the two inputs are of different resolution & frame rate
• 4K Monitors do not output 10-bit HDMI video - Workaround: Use 8 or 12 bit video
• 12bpc SDI formats do not display correctly on our monitors - Workaround: Use a different bit depth
• ARRI Camera Control will crash if the ARRI CAP Password is incorrect when connecting to the monitor.