SmallHD PageOS firmware v6.3.0

Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 700 Series, Other Services, Others Important Software Information: PLEASE READ BELOW

• OLDER FIRMWARE IS LISTED BELOW, CLICK “SHOW MORE”
• Click Here for a complete list of compatible monitors
• This firmware will NOT support the following monitors:
• Focus 5 & 7 (LCD, OLED, HDMI, SDI, & RX/TX)

- 2403 HDR & 2403 HB

• 1703 HDR & 1703 Studio
• 1303 Studio
• 700 Series - 701, 701L, 702 Bright, 702 OLED
• 500 Series - 501, 502, 502 Bright
• This firmware is NOT compatible with the DSMC3 RED®Touch, or Action 5
• RED® Touch users have firmware available on the RED® Touch ​tab
• This firmware is NOT compatible with legacy monitors (DP1, DP6, DP4, AC7, and

DP7-PRO)

• If your firmware is below 3.6.5, we recommend the following upgrade path:

3.6.5 -> 4.8.7 -> 5.5.6 -> 6.0.0 Features Added:

• Portrait UI
• The monitor now has an option to turn UI elements 90 degrees
• Settings available in the “Image Rotate” settings section
• 4K Production Monitor Video Output Improvements
• Adds support for cross conversion
• Adds support for applying a LUT to downstream SDI video
• Signal Routing Diagram shows the Input/Output routing in the Input & Output settings menu (Monitor Settings > Input & Output) Improvements and Alterations:
• Ultra 7 now has a “Max Bright” mode
• Status Display may now be shown in “Square Division” multiplex mode
• Added a more prominent warning that running display maintenance on a Quantum monitor may require re-calibrating the display afterwards
• Q27 monitors may now be set to a 1,000 nit Color Pipe
• Reworks to HDMI Output functionality
• No longer “Enable / Disable” now “ Auto / Force”
• Auto: HDMI will output so long as a downstream device is detected
• Force: HDMI will output always, even on an empty cable
• Registration Wizard now includes a QR code linking to the monitor’s Quick Start Guide
• This can also be accessed at any time via the new “Getting Started” settings section (Monitor Settings > Help > Getting Started)
• Added a “New Features” popup that displays after a firmware update Bugs Fixed:
• Improved stability of SDI 1 Video on 4K production monitors
• Ultra 7 lock switch is now respected immediately at power-on
• Improved Ultra 10 Battery Low indicator reliability
• Fixed an issue with Lift Controls on Ultra 5 monitors
• Resolved an issue with downstream HDMI audio on UltraBright monitors
• RED RCP2 Camera Control now allows toggling Record Format
• Added Native White Point measurement for VISION monitors in the Manual Calibration Wizard
• Resolved issues when receiving Record Flag from RED KOMODO and Canon C300
• Function button LUT assignment no longer clears after a restart
• Prevented an intermittent monitor crash while updating internal Teradek wireless RX/TX 4K units
• Many improvements for supporting uncommon video formats
• Beta 1 Resolved an issue​ with RGB Parade Waveform producing artifacts on Quantum 32 Monitors when using UHD formats
• Beta 1 Resolved an issue with the Quantum 32 Waveform producing artifacts when positioned at the top of a video Page
• Beta 1 Fixed the an issue with the Waveform Tool wrapping vertically and horizontally
• Beta 1 Prevented monitor “flicker” that could appear after long run time
• Beta 1 Quantum 32 Dials now illuminate properly after a power cycle
• RC0 RGB Gain control no longer alters peak luminance Recommended Practices
• Connect external recorders directly downstream of your source device (i.e. camera), not downstream of the monitor