SmallHD PageOS firmware v5.1.1

Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 700 Series, Other Services, Others Firmware Update Best Practices

• SD card 2,4,8,16GB
• SD Card Format:
• FAT32 for Wi​ndows
• MS-DOS (FAT) for macOS
• Ensure that only one “.bin” file is on the SD card
• Backup your profile before update (recommended)
• Use AC power or fully charged battery
• Note older version of firmware before update Firmware Compatibility:
• This firmware is NOT compatible with the DSMC3 RED® Touch or Action 5
• RED® Touch users have OS 5 available on the RED® Touch tab
• This firmware is NOT compatible with legacy monitors (DP1, DP6, DP4, AC7, and DP7-PRO) Features Added:
• Monitor firmware now supports the new Bolt 6 Monitor Module for Smart 7 monitors Known Issues in Release 5.1.1:
• Image Capture may not work as expected on PQ color pipes
• The raw input data is captured using image capture. The overlaid image is NOT subject to the color pipe, it’s assumed that all images being overlaid are already in the same color space as the calibration target.
• CalMAN integration has not been finalized and fully validated
• Camaro monitors do not work with 10 bit video from a Murideo color generator
• Workaround: Use a different source
• Switching Inputs causes the Vision 24 monitor to start flickering continuously
• Workaround: Restart the monitor
• May only exhibit the issue when the two inputs are of different resolution & frame rate
• 4K Production Monitors do not out​put 10-bit HDMI video
• Workaround: Use 8 or 12-bit video
• Shotover Addon does not work on the 5.1.1 release
• Color picker values are off by a small percentage Recommended Practices
• Connect external recorders directly downstream of your source device (i.e. camera), not downstream of the monitor .