SmallHD PageOS firmware v5.2.0

Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 700 Series, Other Services, Others Monitors Not Compatible with v5.2.0:

• Focus OLED, Focus OLED SDI, and Focus Pro OLED
• Firmware v5.0.1 can be used for the monitors listed above (located here )
• This firmware is NOT compatible with the DSMC3 RED® Touch or Action 5 RED® Touch users have OS 5 available on the RED® Touch tab
• T​his firmware is NOT compatible with legacy monitors (DP1, DP6, DP4, AC7, and DP7-PRO) Firmware Update Best Practices:
• SD card 2,4,8,16GB - SD Card Format:
• FAT32 for Windows
• MS-DOS (FAT) for macOS
• Ensure that only one “.bin” file is on the SD card
• Backup your profile before update (recommended)
• Use AC power or fully charged battery
• Note older version of firmware before update Features Added:
• Support for the Shotover addon on 4K Production Monitors - Does not support sending overlays downstream
• Added Shotover addon back to 1300/1700/2400 Series Production Monitors
• Added the ability to change Page animation speed - Settings-> Interface-> Pages (options are 1x, 2x, 3x, instant) Improvements and Alterations:
• Added Max Bright mode to Smart 5 monitors Bugs Fixed:
• Fixed a bug breaking user registration, which caused monitor token to display as “UNKNOWN”
• Resolved pairing issues with the FOCUS 7 wireless monitors
• Switching inputs between HDMI and SDI no longer requires restarting the Vision 24
• Resolved update failures on the Smart 7 4K Wireless Modules
• ARRI IP menu now works with a joystick on Smart 5 monitors
• Resolved video artifacts (sparkles, incorrect colors) when using Full Range SDI
• Resolved issue with ARRI standby light indicator using camera control for ARRI
• Resolved issue with ARRI tree menu not updating when media inserted
• Resolved flashing of Sony FX9 Record Flag when camera was not recording
• Peaking Tool’s Brightness & Contrast settings are now preserved through power cycle
• Fixed a bug that would cause monitor page state to not save through power cycle
• Soft Function Buttons: Cycle zoom level now works properly
• Smart 7 output now works with 1080i50 and 1080i60
• Smart 7 output no longer breaks after switching input from 4k to 2k/1080p
• HDMI output now works on 10-bit formats for 4K Product​ion Monitors Known Issues in Release 5.2.0:
• Image Capture may not work as expected on PQ color pipes - The raw input data is captured using image capture. The overlaid image is NOT subject to the color pipe, it’s assumed that all images being overlaid are already in the same color space as the calibration target.
• CalMAN integration has not been finalized and fully validated
• Color Picker values are off by a small percentage - Expected to be resolved in firmware version 5.3.0 Recommended Practices
• Connect external recorders directly downstream of your source device (i.e. camera), not downstream of the monitor .