SmallHD PageOS firmware v4.7.0

Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 500 Series, FOCUS - 500 Wireless Series, FOCUS - 700 Series, Others, Other Services Firmware update Best practices:

• SD card 2,4,8,16GB
• Backup your profile before update (recommended)
• Use AC power or fully charged battery
• Note older version of firmware before update Firmware Compatibility:
• PageOS 4 is compatible with all current SmallHD monitors
• PageOS 4 is not compatible with legacy monitors (DP1, DP6, DP4, AC7, and DP7-PRO) Features Added:
• Wireless Camera Control for the ARRI MINI, Alexa, MINI LF is now supported when using the Bolt 4K TX Module + Bolt 4K RX Module
• Must have a Cine 7 monitor on the TX side
• At least one monitor in the chain needs an ARRI license for the​ wireless camera control to work
• Disable remote camera control in the TX monitor’s settings menu, you can also enable a PIN requirement for connection
• Only a single RX can access wireless camera control at a time. Video still works, but camera control only works with a single TX, RX pair
• Added LOG > HDR conversions to 4K production monitors
• Currently, this feature does NOT allow using a custom LUT
• Added Judd offset toggle to calibration menu on OLED monitors
• Judd Modification explanation
• Monitor now displays a QR code during initial registration
• Support for the Bolt 4K Monitor Module 1500 TX and 1500 RX (Coming Soon)
• Com​patible with SmallHD Smart 7 Monitors Improvements and Alterations:
• 4K production monitor default power button brightness lowered from 10 to 5
• Improved Color Picker Accuracy
• Improved the Calibration Manual Adjustments UI
• Added an option to display raw code values in the waveform
• Improved keyboard integration control Bugs Fixed:
• Teradek RT Overlay now supported on 4K production monitors
• Cine 7 Crosshair and Image Overlay were not always centered
• 4K production monitors would recognize PSF formats as interlaced
• Image Capture setting “Capture LUTs” now saved through power cycle
• Fixed a bug that may have caused registered monitors to ask for user registration at power on
• 4K production monitors’ power button brightness no longer initializes to the wrong value
• Bidirectional SDI outputs no longer get disabled
• Studio & Cinema backlight setting accuracy improved on Cine 13
• Fixed Frequency on Cine 7 4K Modules always defaulted to the first list item after power up New Bugs:
• Waveform sometimes artifacts on YCC data if Waveform is at the top of the Page
• Smart 7 - Output Page indicates downstream video always 1080, even when the downstream video is UHD Recommended Practices
• Connect third party external recorders directly downstream of your source device (i.e. camera), not downstream of the monitor