SmallHD PageOS firmware v5.4.0

Supported series: FALCON - 500 Serie​s, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 700 Series, Other Services, Others

SPECIAL NOTES FOR THIS FIRMWARE

• This firmware will NOT support the following monitors. - 1703 HDR

- 2403 HDR

- 2403 HB

• 1703 Studio
• 1303 Studio

- 702 OLED

• 701 Light
• 701
• 702 Bright
• 501
• 502
• 502 Bright
• This firmware is NOT compatible with the DSMC3 RED®Touch or Action 5
• RED® Touch users have OS 5 available on the RED® Touch tab
• This firmware is NOT compatible with legacy monitors (DP1, DP6, DP4, AC7, and DP7-PRO) Improvements and Alterations:
• Improved EL Zone Accuracy
• Wireless Pairing Improvements
• Users now have options to avoid overwriting existing monitor profiles - Users may choose to overwrite the existing profile, or automatically append a number to the new profile name to make it unique
• Users now also have the option of including a timestamp in profile names
• Monitor Settings > User > Profiles
• Added “Quiet Mode” option on the SmallHD Smart 5 Series - Monitor Settings > User > Fan (Smart 5 monitor only)
• Low Voltage warning is now more functional - Instead of a large popup, it now triggers the text “LOW” to appear in the status-bar area of the display. This text will appear even if the status bar is not enabled
• Improved ARRI LogC4 Handling - Added more built-in manufacturer​ LUT options when converting LogC4 to SDR and HDR using the Color Pipe
• “ARRI Wide Gamut” changed to “ARRI Wide Gamut 3”
• Improved HDMI output robustness Bugs Fixed:
• Resolved an issue when applying a conversion LUT via the Look Tool - Results now correctly match when loading a conversion LUT through either the Color Pipe or as a Look Tool
• Look Tool no longer shows the Livegrade option when it is not available
• Smart 7 Image Capture no longer saves as 1920x972 instead of 1920x1080
• Fixed an issue with the patch size during integrated Calman calibration
• Sending an invalid SDI signal to the monitor will no longer cause other valid SDI inputs to flicker
• RCP2 Camera Control - Camera Mode can now be changed via the joystick Known Issues in Release 5.4.0:
• HDR mode and Max Bright mode can be enabled together
• Image Capture may not work as expected on PQ Color Pipes - The raw input data is captured using image capture. The overlaid image is NOT subject to the Color Pipe, it’s assumed that all images being overlaid are already in the same color space as the calibration target
• Teradek Bolt 6 XT/LT units do not support wireless camera control
• When receiving Log video from the Sony VENICE, the EL Zone colors may be wrong - Workaround: Instead of leaving the “Video Range” on “AUTO”, change it to “FULL