SmallHD PageOS firmware v5.4.1

Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 700 Series, Other Services, Others

SPECIAL NOTES FOR THIS FIRMWARE

• This firmware will NOT support the following monitors. - 1703 HDR

- 2403 HDR

- 2403 HB

• 1703 Studio
• 1303 Studio

- 702 OLED

• 701 Light
• 701
• 702 Bright
• 501
• 502
• 502 B​right
• This firmware is NOT compatible with the DSMC3 RED®Touch or Action 5
• RED® Touch users have OS 5 available on the RED® Touch tab
• This firmware is NOT compatible with legacy monitors (DP1, DP6, DP4, AC7, and DP7-PRO) Features Added:
• Added F-Log2 support for the EL Zones Exposure Assist Tool
• Added Canon C-Log 1, 2 and 3 support for the EL Zones Exposure Assist Tool
• Added new “System Info” settings section under the “System” category - Displays the monitor’s cumulative run-time
• Displays the monitor’s serial number
• Displays the monitor’s current firmware version
• Displays a “System Code” to be used for manufacturing purposes Improvements and Alterations:
• Vision 24 monitors will now tolerate lower voltages before shutting down - The shutdown threshold has been lowered from 26.9V to 19V Bugs Fixed:
• Improved accuracy of some LOG conversions
• Resolved a bug with tool positioning on 4K Production Monitors
• Resolved a bug that caused the joystick to be unresponsive within the first few moments of turning on the monitor
• The Zebra Tool now functions properly when set to IRE values less than 0 or greater than 100
• Resolved a bug that allowed Tool legends to be drawn too large on Multi-View Pages
• Resolved a bug causing Profile Names to be truncated to only a few characters
• Resolved a potential monitor crash when loading Monitor Profiles Kno​wn Issues in Release 5.4.1:
• HDR mode and Max Bright mode can be enabled together
• Image Capture may not work as expected on PQ Color Pipes - The raw input data is captured using image capture. The overlaid image is NOT subject to the Color Pipe, it’s assumed that all images being overlaid are already in the same color space as the calibration target
• Smart 5 Monitors can’t perform wireless camera control through standalone Teradek Bolts
• Bolt 6 XT and LT Units don’t work with Camera Control
• When receiving LOG video from the Sony VENICE, the EL Zone colors may be wrong - Workaround: Instead of leaving the “Video Range” on “AUTO”, change it to “FULL