SmallHD PageOS firmware v5.5.0

Supported series: FALCON - 500 Series, FALCON - 700 Series, FIAT - 700 Series, FOCUS - 700 Series, Other Services, Others Important Software Information:

• This firmware will NOT support the following monitors:

- 1703 HDR

- 2403 HDR

- 2403 HB

• 1703 Studio
• 1303 Studio

- 702 OLE​D

• 701 Light
• 701
• 702 Bright
• 501
• 502
• 502 Bright
• This firmware is NOT compatible with the DSMC3 RED®Touch or Action 5
• RED® Touch users have OS 5 available on the RED® Touch tab
• This firmware is NOT compatible with legacy monitors (DP1, DP6, DP4, AC7, and DP7-PRO) Features Added:
• Added Camera Control support for ARRI ALEXA 35
• Compatible with camera software update package 1.2 and prior (SUP 1.2.0)
• Sony VENICE 2 is now supported by the VENICE camera control license
• Sony VENICE and VENICE 2 now support wireless camera control
• Added support for Ethernet camera control of RCP2 and DSMC2 RED cameras
• Burn-In Recover Mode
• Adds a new settings section under "Display" that allows the user to trigger a burn-in recovery sequence, which cycles the panel through a color pattern to fix image retention
• Monitor Settings > Display > Burn-In Recover
• SmallHD 4K Production Monitors now support camera control licenses for ARRI, RED and Sony cameras Improvements and Alterations:
• Improved 703 UltraBright calibration system.
• All previous calibration LUTs created on 703 UB monitors will be altered with this update, we recommend re-calibrating on the new firmware. This will not affect monitors that have never had a user calibration LUT loaded
• Added support for Blackmagic log BMDFilm and BMDFilm 4K
• These formats now work with the EL Zone Tool
• Improved IP connection for camera control menus
• 4K monitors now display LUT names in the user button label when a Look Tool is assigned to a user button
• Smart 5 Monitors can now perform camera control when tethered via USB to a stand-alone Teradek Bolt 4K or Bolt 6 transmitter or receiver. Previously only Smart 7 monitors supported this feature
• Smart 7 Wireless Modules now work on Cine 7 500 TX, Cine 7 500 RX
• Updated ARRI style Exposure Assist to support LogC4
• GPI pin numbers were updated to match RJ45 standards. This will not alter the behavior of previously assigned GPI functions Bugs Fixed:
• Custom Calibrations are now assignable to Color Pipe 8
• Image Captures should no longer save corrupted frames
• AUTO range selection now defers to the expected range of the selected LOG format
• Previously, users using Sony log formats needed to force the Color Pipe to FULL; now the color should be accurate even when leaving the Color Pipe to the default "AUTO" setting
• Resolved issues with LUTs not rendering properly on multiview
• Image captures should now be scaled correctly on 720p monitors
• Calman Integration: Resolved issues setting the monitor's white and black levels
• Switching the input range of incoming video now updates the range of the Waveform Tool legend. Previously the Waveform Tool needed to be toggled off and back on
• Fixed an issue using Legal range video in the 4K production monitor Calibration Wizard
• Camera Control - DSMC2 "playback" menu now shows the stop button
• Enlarged the size of the white point / black point color patch on small monitors
• Resolved issues with the Waveform spot meter when using scaled video
• Vision Series monitor 2 pass calibra​tion now saves even if the user skips applying LUTs
• Resolved issues in the Zebra Tool when thresholds were set below 0 or above 100 IRE
• Resolved several issues regarding toolbar scrolling through multiple tools
• Resolved visible gap between the waveform data and waveform legend
• HDR mode and Max Bright mode can no longer be enabled simultaneously
• Aspect Guide is no longer offset from the edge of the panel by 1 pixel on the Indie 7
• Improved interactions between the Color Picker Tool and Pixel Zoom
• Assigning Livegrade Tool to a function button now works as intended
• Color Picker Tool location menu can now be closed via a touchscreen even when a scope overlaps the 'back' button location Known Issues in Release 5.5.0:
• The Color Picker Tool may not work as intended in some circumstances
• Color Picker may not display correct values on Focus Pro SDI or Focus OLED

SDI

• Color Picker does not work when the Crop & Scale Tool is used. This bug is not specific to any monitor Recommended Practices
• Connect external recorders directly downstream of your source device (i.e. camera), not downstream of the monitor