Changelog

Icom firmware changelog

168 releases tracked, newest first.

  1. IC-9700 v1.10 v1.11 Fixes hang-up when using multifunction dial.

  2. IC-9700 v1.06 v1.10 Adds Home CH Beep, Sync to REF IN, and UDP Hole Punch; fixes CI-V commands 25 and 26

  3. IC-9700 v1.05 v1.06 Eliminated RX audio dropout when changing IF filters in DV mode, improved calibration accuracy, and fixed display indication.

  4. IC-9700 v1.05 first tracked Faster startup, improved call sign display and transmission, realigned DR function layout.

  5. IC-7850 v1.30 v1.31 Fixed Ethernet audio output issue when rebooting from Remote Standby mode

  6. IC-7610 v1.11 v1.20 Added USB 2 I/Q baseband output support and MAC address display in information menu

  7. IC-7610 v1.10 v1.11 Fixes incorrect USB output format for Scope waveform data.

  8. IC-7850 v1.20 v1.30 Supports RS-BA1 Version 2, expands SSB data passband to 100-2900 Hz, improves stability.

  9. IC-7610 v1.06 v1.10 SSB data passband width adjustable to 100-2900 Hz, USB keying activates immediately after connection, external display improved.

  10. IC-7300 v1.21 v1.30 SSB data passband width extended to 100-2900 Hz and USB keying activates immediately on connection.

  11. IC-7700 v2.10 v2.20 Adds SET MODE to expand SSB data transmission passband to 100-2900 Hz

  12. IC-7610 v1.05 v1.06 Improved signal quality and fixed reception instability and system hang-ups.

  13. IC-7300 v1.20 v1.21

  14. IC-7610 v1.04 v1.05 Improved SSB transmit quality, AM receiver filtering, and COMP meter accuracy.

  15. IC-7850 v1.13 v1.20 Added MIC+USB modulation input option and enabled RC-28 desktop dial support.

  16. IC-7610 v1.03 v1.04 Resolves intermittent noise from cold start

  17. IC-7850 v1.12 v1.13 Transmit meter indications corrected in Dual scope mode

  18. IC-7300 v1.14 v1.20 Full Keyboard now supports English, German, and French; added MIC+USB modulation input combination.

  19. IC-7610 v1.03 first tracked Fixes transmit meter display in Dual scope mode and optimizes antenna tuner operation.

  20. IC-7300 v1.13 v1.14 Spectrum scope improvements with spurious signal elimination and flickering reduction, plus CI-V USB setting fixes.

  21. IC-7850 v1.11 v1.12 Spectrum scope screen enhanced.

  22. IC-7300 v1.12 v1.13 Improves FM transmit audio signal-to-noise ratio.

  23. IC-7300 v1.12 first tracked Improved SSB audio processing and minor visual updates.

  24. IC-7100 vE4 vE5 Power meter visibility and speech compressor function improved.

  25. IC-7850 v1.10 v1.11 Improves transmit audio waveform display on the audio scope.

  26. IC-7850 v1.01 v1.10 Dual-band tracking and waterfall marker auto-hide added; S-meter issue fixed.

  27. ID-51A PLUS vE1 first tracked Improves DSP processing for DV Fast Data

  28. ID-5100A vE2 vE3 Storage expanded for repeater lists, call signs, and GPS; Bluetooth headset and tone control options enhanced.

  29. IC-7700 v2.00 v2.10 Improves CI-V commands for antenna control and logging, changes default relay type to MOS-FET.

  30. IC-7100 vE3 vE4 Added CI-V antenna control, improved logging software, and enhanced RIT functionality.

  31. IC-7800 v3.01 v3.10 Adds CI-V command improvements for antenna control and logging software, defaults SEND Relay Type to MOS-FET.

  32. IC-7600 v1.11 v2.00 Spectrum scope enhanced with waterfall and mouse control; new TX delay and remote standby settings.

  33. IC-7850 v1.01 first tracked Faster audio output when switching from transmit to receive mode.

  34. IC-7100 vE2 vE3 Improves received audio quality

  35. IC-9100 vE2 vE3 DTCS modulation adjusted to eliminate unwanted audio at receivers

  36. ID-5100A vE1 vE2 DV Fast Data support added, tone squelch for FM repeaters, and new GPS features.

  37. ID-5100A vE1 first tracked Fixes external speaker display, data recognition, and receiver sensitivity.

  38. IC-7800 v3.00 v3.01 Remote control now works without a Base PC; voice quality improved over high-latency networks.

  39. IC-7700 v1.21 v2.00 Adds audio scope, improves bandscope interface and mouse control, and expands recording capabilities.

  40. IC-7100 vE1 vE2 DSP firmware corrects DTMF tone levels

  41. IC-7800 v2.30 v3.00 Bandscope gains audio scope and mouse operation; USB supports flash drives and mice; transmission recording capability added.

  42. IC-7100 vE1 first tracked GPS Time Correct function improved for external GPS receivers

  43. IC-7410 v1 first tracked Fixed audio problem when switching bands during FM reception

  44. IC-9100 vE1 vE2 Fixes audio dropout on FM band switching, S-meter display errors, and squelch decoding problems.

  45. ID-31A vE1 vE2

  46. IC-9100 vE1 first tracked Fixed sub-band IF filter switching and TX/RX switching issues in DV mode.

  47. ID-31A vE1 first tracked Improves DV mode TX audio quality and weak signal readability, adds Canadian version support.

  48. IC-7700 v1.20 v1.21 Improves DSP unit software performance.

  49. IC-7600 v1.03 v1.11 Adds Time-Out Timer feature and expands CI-V commands for RS-BA1 controller support.

  50. IC-7800 v2.21 v2.30 Adds Time-Out Timer function and extended CI-V command support for RS-BA1