Icom IC-7610 firmware `v1.20`

Icom · Released Aug 24, 2018 · First seen Sep 7, 2026

v1.20 is not the latest firmware for the Icom IC-7610: the current version is v1.45 (December 5, 2025). Go to v1.45

In short — summary by updatemystuff.com

Added USB 2 I/Q baseband output support and MAC address display in information menu

Written from Icom's release notes, which are printed in full below.

Was this useful?

Changes in this version

The [USB 2] I/Q baseband signal output port is now supported.

The MAC address display is added to the screen in

Set Menu > Others > Information.

To update the firmware

To update from firmware version 1.05 or older to 1.11, the IC-7610 needs to have firmware version 1.06 installed.

To revert from firmware version 1.20 or later to 1.06 or older, the IC-7610 needs to have firmware version 1.11 installed.

Thoroughly read Section 6, SD CARD/USB FLASH DRIVE, in the

and the Section 13, UPDATING THE FIRMWARE, in the

, and follow the instructions displayed on the IC-7610 LCD screen.

BE SURE to make a backup copy of your data settings to an SD card/USB flash drive before updating the firmware.

The firmware will be updated to the following versions.

Main CPU: 1.20

Sub CPU: 1.04

Front CPU: 1.01

Note

Also download the related software "IC-7610 USB I/Q Package for HDSDR" from here .

updatemystuff.com never hosts firmware files — always download from the official source.

Create a free account and get an email the moment Icom publishes new firmware.

The [USB 2] I/Q baseband signal output port is now supported.
The MAC address display is added to the screen in
Set Menu > Others > Information.
To update from firmware version 1.05 or older to 1.11, the IC-7610 needs to have firmware version 1.06 installed.
To revert from firmware version 1.20 or later to 1.06 or older, the IC-7610 needs to have firmware version 1.11 installed.
Main CPU: 1.20
Sub CPU: 1.04
Also download the related software "IC-7610 USB I/Q Package for HDSDR" from