Icom IC-7610
firmware v1.10
Icom · Released Jul 20, 2018 · First seen Sep 7, 2026
Source:
icomjapan.com
v1.10 is not the latest firmware for the Icom IC-7610: the current version is v1.45 (December 5, 2025). Go to v1.45
In short — summary by updatemystuff.com
SSB data passband width adjustable to 100-2900 Hz, USB keying activates immediately after connection, external display improved.
- SSB data mode passband width expanded to 100-2900 Hz
- USB SEND/USB Keying function activates immediately after USB connection
- External display output signal improved
Written from Icom's release notes, which are printed in full below.
Was this useful? Thanks.
What's in this update
Changes in this version
RS-BA1 Version 2 is supported.
A SET MODE item is added to expand the transmission passband width for the SSB data mode up to "100 to 2900 Hz".
A SET MODE item is added to make the USB SEND/USB Keying function active immediately after USB port connection.
Output signal for an external display is improved.
Refer to IC-7610 Firmware Update Information Ver.1.10 for more details.
To update the firmware
To updated from firmware version 1.05 or older to 1.10, the IC-7610 needs to have firmware version 1.06 installed.
Thoroughly read Section 6, SD CARD/USB FLASH DRIVE, in the
BASIC MANUAL
and the Section 13, UPDATING THE FIRMWARE, in the
ADVANCED MANUAL
, and follow the instructions displayed on the IC-7610 LCD screen.
The firmware will be updated to the following versions.
Main CPU: 1.10
Sub CPU: 1.03
Front CPU: 1.01
FPGA: 1.05
updatemystuff.com never hosts firmware files — always download from the official source.
Get it from IcomWatch the IC-7610 for updates
Create a free account and get an email the moment Icom publishes new firmware.
Create account & watch