Icom IC-7300
firmware v1.30
Icom · Released Jul 20, 2018 · First seen Sep 7, 2026
Source:
icomjapan.com
v1.30 is not the latest firmware for the Icom IC-7300: the current version is v1.42 (May 15, 2024). Go to v1.42
In short — summary by updatemystuff.com
SSB data passband width extended to 100-2900 Hz and USB keying activates immediately on connection.
- SSB data transmission passband expanded to 100-2900 Hz
- USB SEND/USB Keying function active immediately after USB port connection
- Menu structure reorganized
Written from Icom's release notes, which are printed in full below.
Was this useful? Thanks.
What's in this update
Changes in this version
A SET MODE item is added to expand the transmission passband width for the SSB data mode up to "100 to 2900 Hz".
A SET MODE item is added to make the USB SEND/USB Keying function active immediately after USB port connection. The Menu structure is changed accordingly.
Refer to IC-7300 Firmware Update Information Ver.1.30 for more details.
To update the firmware
Thoroughly read Section 8. USING AN SD CARD and Section 15.
UPDATING THE FIRMWARE of the
FULL MANUAL
and follow the instructions displayed on the IC-7300 LCD screen.
The firmware will be updated to the following versions.
Main CPU: 1.30
DSP Program: 1.07
DSP Data: 1.00
FPGA: 1.13
updatemystuff.com never hosts firmware files — always download from the official source.
Get it from IcomWatch the IC-7300 for updates
Create a free account and get an email the moment Icom publishes new firmware.
Create account & watchChanged since v1.21
- A SET MODE item is added to expand the transmission passband width for the SSB data mode up to "100 to 2900 Hz".
- A SET MODE item is added to make the USB SEND/USB Keying function active immediately after USB port connection.
- The Menu structure is changed accordingly.
- IC-7300 Firmware Update Information Ver.1.30
- for more details.
- Main CPU: 1.30