TASCAM Sonicview 24XP / TASCAM Sonicview 24dp firmware v2.3.3

< Maintenance items >

• MODULE library recall process via Ember+ has been improved to speed up operation.
• When using the unit as an audio interface, the USB connection would sometimes disconnect during prolonged continuous use. This has been fixed.
• When recalling snapshots or loading All System Data, audio would sometimes fail to output from the R channel of the stereo module even when the SEND from the mono module to the stereo module was ON. This has been fixed.
• When CH modules were stereo-linked, the anal​og gain for the R channel would sometimes either not be displayed or show an incorrect value. This has been fixed.
• When the metering point for MAIN L/R was set to something other than OUTPUT and no output ports were assigned to it, the unit LED OUTPUT meters would not function. This has been fixed.
• Even when recalling a snapshot with DUCKER KEY IN SOURCE assigned, the KEY IN signal would not be input. This has been fixed.
• A Control Software Error would sometimes occur when performing operations such as Recall or Rename on imported snapshots. This ha​s been fixed.
• When sending from MAIN L/R to a MIX module with the stereo link disabled, the PAN levels would not be reflected correctly. This has been fixed.
• The AES and Dante signals have been adjusted to fall within the standard phase‑difference range specified by AES‑11.
• On the RECORDER INPUT SOURCE SELECT Screen, MAIN R would incorrectly be displayed as “MAIN L”. This has been fixed.
• When MAIN L/R was selected as the KEY IN SOURCE on a mono module, the KEY IN would not respond to the MAIN R signal. This has been fixed.
• When the CH module's DIRECT OUT POINT was set to POST FADER, DELAY was not applied to the DIRECT OUT signal. This has been fixed.