TASCAM Sonicview 16XP / TASCAM Sonicview 16dp firmware v1.2.0

< New functions >

• Linkage function with TASCAM IF-MTR32 is now supported.
• New function (Ch mute/Pre-send link) added: the link operation of the input module Mute and the Pre Fader Send mute to the AUX bus can be set independently for each bus.

< Maintenance items >

• Cont​rol redundancy of TASCAM SB-16D is now supported.

Notes: For this matter, users won’t be able to use the TASCAM SB-16D with FW V1.1.0 In case of use in combination with the TASCAM SB-16D, please update the main unit’s firmware and the TASCAM Sonicview Control app up to V1.2.0.

• POST COMP has been changed to PRE FADER in the Metering Point options for the CH1-40 module.
• Issues with the Copy Module in which Analog Gain, Pad, and HPF cannot be copied have been fixed.
• Issues in Module Library in which the STORE/RECALL function cannot be used with Library Module Input’s Analog Gain, Pad, and HPF have been fixed.
• The following issues with the Snapshot recall safe have been fixed:
• In Parameter Safe, even when a checkmark was placed on the “Input/Osc parameters”, all Insert On/Off, Insert Point’s Recall Safe were validated. This has been fixed.

From now on all Recall Safe functions will be validated after a checkmark is placed on “Insert Routing”.

• In Parameter Safe, even when a checkmark was placed on “Effect Settings", Gate/Expander/DeEsser parameters, Comp/Ducker parameters, and Delay parameters were validated. This has been fixed.

From now on all Recall Safe functions will be validated after a checkmark is placed on "Other Module Parameters".

• In Parameter Safe, even when a checkmark was placed on "Input Routing / Ch Stereo Link / Send Parameters" Pan/Bal’s Recall Safe was validated. This has been fixed.

From now on all Recall Safe functions will be validated after a checkmark is placed on "Other Module Parameters",

• In MODULE SAFE with the INPUT MODULE on ON, noise occurred on that INPUT MODULE when recalling SNAPSHOT. This has been fixed.
• When the Clock Master is on Dante, changing the Sync Clock would trigger noise in Dante output. This has been fixed.
• Recall Snapshot would change the image in ST IN1 and ST IN2 to MONO. This has been fixed.
• In the TASCAM Sonicview Control app, turning ON/OFF the INPUT MODULE’s PAD would make the Analog GAIN value not match the main unit. This has been fixed.
• In Stereo Link, this would be not displayed correctly or work properly. This has been fixed.
• REC TRIM would not work properly in the RECORDER section of Recorder/Player. This has been fixed.
• The SOLO/MUTE indicator would not be displayed properly in the DCA module.​ This has been fixed.
• The DCA ASSIGN would not be displayed properly when recalling snapshots. This has been fixed.
• With MIX1-4, FX1-4 would not be displayed on the SENDS ON FADER screen when changing into SENDS ON FADER in the GROUP BUS mode.
• When recalling/loading snapshots or All System Data, DCA-to-DCA assignments were not being properly recalled/loaded. This has been fixed.
• In the FX RTN module when recalling the MODULE Library, PRE/POST settings for the MIX1-22 and FX1-4 buses would turn to PRE settings when ALL SEND buses were displayed. This has been fixed.
• The SENDS ON FADER of a grouped module in the BUS CONFIG tab would become controllable when the SENDS ON FADER screen is displayed. This has been fixed.
• The Paste module in MIX1-22 module (bus mode in AUX), or when Recall was performed in the MODULE Library, the MIX/FX SEND level indicator on the MODULE (OVERVIEW) screen would sometimes show the level to itself. This has been fixed.
• Sound would sometimes oscillate in the Paste module in MIX1-22 module (bus mode in GROUP), or when Recall was performed in the MODULE Library. This has been fixed.
• SENDS ON FADER operation could be performed for modules with bus mode set to GROUP in the BUS CONFIG tab of the MIXER CONFIG screen when the SENDS ON FADER screen was displayed. This has been fixed.
• Operation stability has been improved.