TASCAM Sonicview 16XP / TASCAM Sonicview 16dp firmware v1.1.0

< New functions >

• The SB-16D control and linking function is supported.
• The DUCKER function is supported.
• In case of stereo-linked input module, it became that the left and right input source and insert send/return port can be selected independently.

In case of stereo-linked output module, it became that the left and right output port and insert/return port can be selected independently as well.

• In case of Sends On Fader active, the MUTE button on top panel works as Sends On/Off function instead of module Mute On/Off.
• When the SEND display area on the HOME screen is s​elected, tapping it again, the screen move to the MODULE(SEND/PAN) screen.

Note: Please refer to the TASCAM Sonicview 16, Sonicview 24 Reference Manual (Rev.B) for details on the new features.

< Maintenance items >

• Some bugs related to Dante, display and operation have been fixed, and the operation stability has been improved.
• Fixed a bug that the contents of the file may be empty when saving ALL SYSTEM DATA.
• Fixed a bug that the 0dB position of GAIN may not be correct depending on the reference level setting.
• Fixed an bug when selecting an input port as a monitor source.
• Fixed a bug that caused MADI channel misalignment when the master clock was unlocked.
• Adjusted the contrast of the "CHANNEL DISPLAY" so that it is balanced between normal and Sends On Fader.

Ver1.03 (2022.6.23)

< Maintenance items >

• Fixed a bug where noise could ​be added to the SOLO when solo mode was set to Exclusive and quickly switching SOLO.
• Improved resistance to Dante Clock fluctuations.
• Fixed a bug that channel deviation occurred in MADI output at startup when the MADI option card (IF-MA64/EX, IF-MA64/BN) is installed and the Clock Master is set to WORD in the Sync Clock settings,
• Fixed a bug that the SEND level of stereo-linked modules could not be restored correctly when loading All System Data.

For details on how to update, refer to P152 “Firmware Update Procedures” of the “TASCAM Sonicview16, Sonicview 24 Reference Manual (Rev.A)”.

Note: After completing the update, turn off the power with the power switch without using the "Restart" button.