TASCAM Sonicview 16XP / TASCAM Sonicview 16dp firmware v2.3.2

< New functions >

• A function to hide error/alert messages at the top of the screen has been added.

Minimize/Hide can be selected by tapping the left end of the message display area.

< Maintenance items >

• The lock behavior of GPIO-IN and Foot Switch on the LOCK SETUP screen has been changed. Previously, the system ignored input signals from the ​connectors, but now it locks the APPLY operation on the USER DEFINED CONTROLS Screen (GPIO-IN / Foot Switch), preventing setting changes.
• The EQ function would sometimes not operate correctly when the HI band TYPE was set to LPF in a CH module. This has been fixed.
• PTP-related error/alert messages could not be cleared even after the error/alert was resolved. This has been fixed.
• The GATE/EQ/COMP display area on the HOME Screen would appear with a white hash pattern. This has been fixed.
• In the ST IN1/2 module, the R channel assignment for INPUT A would not be applied correctly. This has been fixed.
• When recalling All System Data, the SRC settings for channels 1-2 on the IF-AE16 would not be applied correctly in some cases. This has been fixed.
• W​hen recalling a snapshot with PORT-to-PORT settings, if the Metering Point was set to OUTPUT, the OUTPUT module level meters (LCD only) would stop responding. This has been fixed.
• Settings would not be applied to the R channels of ST IN 1/2 during D.Trim Batch Setup. This has been fixed.
• Inserting a USB/SD card containing WAV files of 3 channels or more could cause a control software error. This has been fixed.
• When the following monitor sources were selected in the MONITOR SOURCE ASSIGN screen, selecting the corresponding source from MONITOR SELECT resulted in no monitor audio output. This has been fixed.
• When MON 2L or MON 2R was selected in the MONITOR 1 SOURCE ASSIGN screen
• When MON 1L or MON 1R was selected in the MONITOR 2 SOURCE ASSIGN screen