TASCAM Sonicview 16XP / TASCAM Sonicview 16dp firmware v1.4.0

< New functions >

• In the MODULE (GEQ) screen of the MIX 1-22 ​module and MAIN L/R master module, GEQ can now be operated by a FADER.
• Any input/output port can now be selected for INSERT SEND/RETURN.
• SOLO L/R bus newly added to the MONITOR SOURCE ASSIGN screen.
• Factory Reset function newly added.
• The MUTE indicator of a MODULE that is being muted by DCA or Mute Group can now be selected to light/blink.
• The SOLO mode (PFL/AFL) switching can now be operated by User Key/Foot Switch/GPIO-IN.
• All buttons on the Recorder/Player screen can now be operated by User Key/Foot Switch/GPIO-IN.
• The direct playback function of the internal PLAYER (track number selection and playback) can now be operated by User Key/Foot Switch/GPIO-IN.
• INSERT ON/OFF on each module can now be operated by User Key/Foot Switch/GPIO-IN.
• MAIN L/R ON/OFF operation on each module can now be operated by User Key/Foot Switch/GPIO-IN.
• MUTE ON/OFF on each module can now be operated by User Key/Foot Switch/GPIO-IN.
• A new screen-paging function by User Key/Foot Switch/GPIO-IN has been added to the following:
• Monitor/Solo tap on the Monitor Setup screen
• Information screen
• Snapshot screen
• Send Overview screen
• MODULE (FX) screen
• Display switching of the 4xSEND area on the HOME screen can now be operated by User Key/Foot Switch/GPIO-IN.
• The IF-AE16 input signal can now be selected as the master clock.

< Maintenance items >

• When the TASCAM IF-MA64/EX or IF-MA64/BN was installed and MADI was set to Master Clock and locked, rebooting the Sonicview unit would lead to the system judging the clock as unlocked and set it to internal. This has been fixed.
• GEQ settings were not retained when recalling the MODULE LIBRARY after selecting GEQ in RECALL SAFE on the LIBRARY MODULE OUTPUT screen of the MIX1-22 module. This has been fixed.
• GEQ settings were n​ot restored after RECALL UNDO after recalling any LIBRARY in the LIBRARY MODULE OUTPUT screen of the MIX1-22 module. This has been fixed.
• The internal Dante clock synchronization during power-on could cause noise in certain Dante audio on rare occasions. This has been fixed.
• When switching the master clock from Internal to either of WORD IN/Dante/Slot1/Slot2, some noise would come out from MONITOR OUT. This has been fixed.
• Playback errors would occur when switching media in the internal PLAYER. This has been fixed.
• The currently playing song would turn to the first song on the media when the internal PLAYER media was USB and the BROWSE screen was opened.
• A new function has been added to the fast forward/rewind operation:

Tap to start fast forwarding/rewind, and tap again to stop it.

• Operation stability has been improved.