DJI Ronin-S firmware `v2.1.1.0`

DJI · Released Nov 19, 2019 · First seen Jul 10, 2026

v2.1.1.0 is not the latest firmware for the DJI Ronin-S: the current version is v2.4.1.30 (January 28, 2021). Go to v2.4.1.30

In short — summary by updatemystuff.com

Adds Motionlapse in ActiveTrack, Portrait mode quick switching, and game controller support.

Written from DJI's release notes, which are printed in full below.

Was this useful?

Added ability to create a Motionlapse through photo capture in ActiveTrack in the Ronin app. It is recommended to create the Motionlapse of a building, and keep the subject in the same position of the frame during shooting (requires Ronin app v1.2.6 or higher).
Added a quick switching function to Portrait mode. Press Mbutton twice to enter/exit Portrait mode.

Portrait mode requires using Ronin-Sin Flashlight mode and the joystick control is not available.

Portrait mode can be disabled on the Ronin app Status page (requires Ronin app v1.2.6 or later).

Note that the tilt axis will rotate 90° when switched to Portrait mode.

Make sure the camera will not collide with the gimbal.

Added Advanced Calibration feature. If the roll axis drifts after recentering the gimbal, enter the DJI Ronin app then System Status and select Advanced Calibration to fix the issue (requires DJI Ronin app v1.2.6 or later).
Added support for using PS4 DualShock and Xbox controllers to control the gimbal and camera. Photo capture, video recording, focus, zoom, profile switch, and gimbal movements can be controlled after connecting the controller to the mobile device and gimbal. Enter the Ronin app and select Create, and then open and stay on the Gaming Controller screen when using the PS4 DualShock controller or Xbox controller to control the gimbal. The speed and smoothness of the control sticks can be adjusted. Set the focus value within 10 for optimal performance. iOS 13 or higher, Android 9.0 or higher, and Ronin app v1.2.6 or higher are required.

In order to control the gimbal, connect the PS4 DualShock controller or Xbox controller to the mobile device via Bluetooth.

Follow the steps below for Bluetooth connection: When using a PS4 DualShock controller, a.

Press and hold the power button and the Share button simultaneously.

Release them when the indicator on the controller flashes quickly. b.

Enable Bluetooth on the mobile device and select DualShock controller.

When using a Xbox controller, a.

Power on the controller, and press and hold the connect button for three seconds. b.

Enable the Bluetooth in the mobile device and select Xbox controller.

updatemystuff.com never hosts firmware files — always download from the official source.

Create a free account and get an email the moment DJI publishes new firmware.