DJI Ronin 4D firmware
DJI · DJI Ronin 4D · Drones
Latest firmware for the DJI Ronin 4D is v01.05.1802 (December 26, 2024).
Changelog
DJI Ronin 4D firmware changelog
Firmware history
-
Release notes & download
Show release notes Hide release notes
?
- Fixed some bugs.
-
Release notes & download
Show release notes Hide release notes
?
- Added support for DJI DL 75mm F1.8 Lens.
- Added support for 16:9 ratio video recording.
- Added support for output 16:9 ratio video signal via the HDMI port of main body and SDI port of the expansion plate.
- Added support for setting the C1 and C2 buttons to increase and decrease the built-in ND filter.
- Added support for using up to three DJI Focus Pro motors on Ronin 4D Flex to control the iris, focus, and zoom of manual lenses. The DJI Focus Pro motor can be connected in series using the USB-Ccable during use.
- Fixed some bugs.
-
Release notes & download
Show release notes Hide release notes
?
- Fixed some bugs.
-
Release notes & download
Show release notes Hide release notes
?
- Added support to use the DJI Video Receiver with the DJI Video Transmitter and Ronin 4D Video Transmitter. Update the firmware of the DJI Ronin 4D Video Transmitter to V01.05.0500 or above.
- Fixed rare issue of failed linking due to the use of third-party batteries for High-Bright Remote Monitor.
-
Release notes & download
Show release notes Hide release notes
?
- Added support for using DJI Assistant 2 (Ronin Series) to active Ronin 4D RAW license.
- Added support for DJI DL PZ 17-28mm T3.0 ASPH Lens.
- Added support for Ronin 4D Flex.
- Added support for using up to three DJI RS Focus Motor (2022) on Ronin 4D Flex to control the iris, focus, and zoom of manual lens. The DJI RS Focus Motor (2022) can be connected in series using the provided Multi-Camera Control Cable during use. Requires DJI RS Focus Motor (2022) firmware v00.03.04.64 or above.
- Added support for electric zoom control of the E Mount motorized zoom lens, optical stabilization, and the ability to switch AF/MF for E Mount Lenses. Only focus ring can be used to control focus when switching to MF. Requires E Mount Unit firmware v00.00.13.00 or above.
- Added support for focus direction settings when using right hand grip.
- Fixed issue: auto focus was not available when using zoom for zoom lens.
- Fixed issue: audio was stuck when using playback for certain video formats.
-
Release notes & download
Show release notes Hide release notes
?
- Added support for the Leica Lmount lens.
- Added manual calibration for the zoom lens.
- Added max speed auto adjustment for the gimbal using the joystick according to the liveview FOV.
- Added support for output clean footage for playback, on-screen display switch, and applied LUT for HDMI port. Output applied LUT is only available when using the HDMI port to output clean footage.
- Added support for anamorphic display de-squeezing for the High-Bright Main Monitor when using playback.
- Added red indicator for overexposure on the waveform and a Small option for waveform size settings.
- Added support for custom features for C1 and C2 buttons.
- Added Position and Distance options in MF mode for fine focus control.
- Added support for using playback via hand grips. Press and hold the EXP button of the left hand grip to enter/exit playback. Press the MODE button to switch options, press the trigger to select footage, and use the dial on the right hand grip to adjust the progress bar during playback.
- Added support for hiding the playback progress bar automatically when no operation is performed for two seconds.
- Added support for zoom direction settings using the dial on the right hand grip.
- Added custom feature, press and hold the trigger to support Z-Axis Lock and zoom.
- Added zoom control feature when using the right hand grip, turn the dial while pressing and holding the trigger. Make sure to set the zoom feature to press and hold the trigger.
- Optimized the start up time for Ronin 4D.
- Optimized the zoom control smoothness for the zoom lens.
- Optimized the display effect for the High-Bright Main Monitor and fixed the overexposure issue for the bright areas.
- Fixed issue: some Emount lenses without calibration cannot focus stably at infinity.
- Fixed issue: gimbal settings did not take effect after importing the user profile.
- Fixed issue: iris failed to be read using the Emount lens with a manual adjustment iris ring.
- Fixed issue: gimbal mode failed to be reset after setting it to custom.
- Fixed issue: playback footage displayed slightly green.
- Fixed issue: LiDAR waveform displayed as normal but AF/AMF was occasionally unavailable.
-
Release notes & download
Show release notes Hide release notes
?
- Added support for ProRes 4444XQ and ProRes 422LT recording.
- Added support for using Jam Sync through the external timecode generator and the 3.5 mm microphone port.
- Added support for using DJI Ronin 4D Hand Grips Mount Universal Adapter connects to Ronin-S External GPS Module to increase stability when turning with the Ronin 4D at high speed.
- Added support for output clean HDMI footage using HDMI port.
- Added support for output up to 4K 60fps HDMI footage when recording at 4K.
- Added zoom control for using the right hand grip to control focus motor with Emount manual zoom lens.
- Added support for output signal with internal timecode and recording trigger signal through HDMI port.
- Added support for focus assistant through double-clicking to zoom-in.
- Added support for anamorphic display de-squeezing for the High-Bright Main Monitor.
- Added Frame Guide and Safety Zone when using playback.
- Added automatic cycle for single footage when using playback.
- Added ActiveTrack speed settings.
- Added support for menu control using the right hand grip.
- Added real-time reading of the gimbal three axes force mobile data for High-Bright Remote Monitor.
- Added 35mm equivalent focal length information read-in to the ProRes metadata.
- Fixed issue: noise was too loud when performing auto tune.
- Fixed issue: Ronin 4D shook at high frequency when tilting with the Z-Axis at lock mode.
- Fixed issue: the preset timecode at REC Run mode was reset after the gimbal reboot.
- Fixed issue: noise was too loud when switching the built-in ND with E Mount lens.
- Fixed issue: camera restarted when using right hand grip to adjust iris with a manual lens.
-
Release notes & download
Show release notes Hide release notes
?
- Added ability to record and playback the transmission image and audio for the High-Bright Remote Monitor.
- Added force mobile feature to control the gimbal for the High-Bright Remote Monitor.
- Added support for up to 1080p/60fps HDMI signal display input for the High-Bright Remote Monitor.
- Added support for anamorphic display de-squeezing for the High-Bright Remote Monitor.
- Added HDMI/SDI output frame rate individual settings for the remote monitor expansion plate.
- Added HDMI output audio ability for the remote monitor expansion plate.
- Added ability to mark the focus points and limit points for Three-Channel Follow Focus.
- Fixed issue: Ronin 4D transmitter occasionally failed to start linking in a low-temperature environment.
Watch the DJI Ronin 4D for updates
Get an email the moment DJI publishes new firmware. Just your email — no account or password needed.
