DJI Mavic 3 firmware
DJI · DJI Mavic 3 · Drones
Latest firmware for the DJI Mavic 3 is v01.00.1600 (July 10, 2026).
Changelog
DJI Mavic 3 firmware changelog
Firmware history
-
Release notes & download
Show release notes Hide release notes
- Fixed some known issues.
-
Release notes & download
Show release notes Hide release notes
- Fixed some minor bugs.
-
Release notes & download
Show release notes Hide release notes
- Added support for Remote ID requirements of some countries and regions.
- Fixed some minor bugs.
-
Release notes & download
Show release notes Hide release notes
- Fixed some minor bugs.
-
Release notes & download
Show release notes Hide release notes
- Added Vision Assist.
- Added AR Home Point, AR Return-to-Home Route, and AR Aircraft Shadow.
- Added Vision Positioning and Obstacle Sensing switch.
- Fixed some minor bugs.
-
Release notes & download
Show release notes Hide release notes
Aircraft
- Added D-Log Mcolor mode for the Hasselblad camera.
- Added support for DJI Goggles 2, DJI Goggles Integra, and DJI RC Motion 2. Visit https://www.dji.com/mavic-3/downloads and refer to the Consumer Drones and Goggles Compatibility Information for more information.
- Fixed some minor bugs.
-
Release notes & download
Show release notes Hide release notes
Aircraft
- Added 4K 24/25fps resolution for Night mode.
- Added Waypoint Flight.
- Optimized the flight altitude limit.
- Fixed some minor bugs.
-
Release notes & download
Show release notes Hide release notes
Aircraft
- Added Night mode in recording mode, supports 4K 30fps and ISO 800 to 12800.
- Added Output Quality settings for Hyperlapse, select from High and Preview options.
- Added ISO 1600 for D-Log.
- Added Spotlight and POI when using tele camera, supports static subject.
- Added Cruise Control. Set one of the customizable buttons of the remote controller to Cruise Control to enable this feature.
- Added Gain and Expo Tuning. The maximum flight speed, brake sensitivity, and other settings can be adjusted in different flight modes.
- Added support for EU C1 certification.
- Added support for RID in the United States.
- Optimized the name rule for footage, the footage name is incremental after formatting.
- Fixed issue: color was abnormal in DNG photos.
- Fixed some minor bugs.
DJI RC Pro
- Added ability to close the prompt by using C1 and C2 button after the Low Battery RTH prompts.
- Added support for DJI Mavic 3 Classic.
- Fixed some minor bugs.
RC-N1
- Fixed some minor bugs.
DJI RC
- Added ability to close the prompt by using C1 and C2 button after the Low Battery RTH DJI Mavic 3 Release Notes https://www.dji.com/mavic-3 prompts.
- Added support for DJI Mavic 3 Classic.
- Fixed some minor bugs.
-
Release notes & download
Show release notes Hide release notes
- Fixed issue: some aircrafts failed to calibrate IMU.
- Fixed some minor bugs for DJI RC Pro.
-
Release notes & download
Show release notes Hide release notes
- Added switch to the tele camera in photo mode, includes single shot, AEB, burst and timed shot, supports JPEG, RAW, JPEG+RAW photo format, and ISO and shutter speed settings.
- Added switch to the tele camera in video mode, supports 4K@25/30/50fps, 1080p@25/30/50fps format, and ISO and shutter speed settings.
- Added HLG for the Hasselblad camera.
- Added 1080p/200fps to Slow Motion when using the Hasselblad camera.
- Added HLG and D-Log to shoot MasterShots and QuickShots (not including Asteroid).
- Digital zoom reaches up to 3x in normal video mode when using the Hasselblad camera.
- Added support to FocusTrack, QuickShots (not including Asteroid), MasterShots, and Hyperlapse for the aircraft when the Wide-Angle Lens is mounted.
- Added ProRes 422 and ProRes 422 LT format to the Hasselblad camera of Mavic 3 Cine.
- Added one-second option to interval time setting when using Hyperlapse on Mavic 3 Cine.
- Added DJI Mavic 3 D-Log to Rec.709 vivid LUT, providing a more vivid color effect. Download the LUT via http://www.dji.com/mavic-3/downloads.
- Added Nifty option for Bypassing when using APAS 5.0. Refer to the Mavic 3 User Manual v1.6 for details.
- Added Reset All Settings and Clear All Data options. Refer to the Mavic 3 User Manual v1.6 for details.
- Added support for Japanese RID requirements.
- Increased Home Point refresh rate.
- Optimized the focus performance when recording with the tele camera.
- Optimized the stability of the aircraft when shooting a Hyperlapse.
- Fixed issue: unable to use Hyperlapse when flying near a Flight Altitude Limit Zone.
DJI RC Pro: DJI Mavic 3 Release Notes https://www.dji.com/mavic-3
- Added more custom functions for buttons and dials. Refer to the onscreen Tips for details.
- Fixed some minor bugs.
-
Release notes & download
Show release notes Hide release notes
- Increased the speed of searching GNSS.
- Fixed issue: Quick Transfer was not available for some scenarios in certain regions.
- Fixed some minor bugs.
-
Release notes & download
Show release notes Hide release notes
- Added QuickShots including Dronie, Rocket, Circle, Helix, Boomerang, and Asteroid.
- Added Panorama mode, capable of capturing in high resolution.
- Added burst shooting.
- Added digital zoom for normal video mode.
- Added Color Display Assist for D-Log.
- Added 4K/60fps and manual EI adjustment for MasterShots.
- Added QuickTransfer.
- Added zoom and D-Log for FocusTrack when recording video.
- Added support to set RTH altitude for Advanced RTH.
- Added USB mode for Mavic 3 Cine for copying data.
- Optimized accuracy of color correction.
- Increased image sharpness of Tele camera when shooting at high magnification.
- Optimized image area for Hyperlapse photos.
- Added support to DJI RC Pro to output clean HDMI footage.
- Added support for DJI RC Pro to cache video and download original video to an external SD card.
- Added support to use DJI RC Pro with DJI Air 2S.
- Fixed some minor bugs.
-
Release notes & download
Show release notes Hide release notes
- Added FocusTrack, MasterShots, and Hyperlapse.
- Added RAW Only photo format.
- Reduced video recording noise for ProRes of Mavic 3 Cine.
- Reduced occasional vibration of aircraft arms in some scenarios.
- Improved RTH performance.
- Improved obstacle avoidance performance.
- Improved hover stability.
- Fixed issue: some computers could not connect to aircraft via USB.
- Fixed issue: abnormal color appeared in some scenarios.
- Fixed some bugs for remote controller.
-
Release notes & download
Show release notes Hide release notes
- Optimized flight safety.
- Added ability to unlock GEO zones.
- Added C4K/120fps, 4K/120fps, 1080p/120fps to Slow Motion.
- Added 1080p/30fps to Explore mode.
- Added D-Log mode.
- Optimized image quality.
- Increased maximum flight speed for APAS 5.0.
Watch the DJI Mavic 3 for updates
Get an email the moment DJI publishes new firmware. Just your email — no account or password needed.
