DJI firmware changelog — page 21

2017-07-12 Ronin v2017.07.12 first tracked

2017-07-12 Ronin-M v2017.07.12 first tracked

2017-07-10 Zenmuse Z3 v1.10.1.40 v01.11.01.50 No Fly Zone Management restricts flights to 30m altitude and 50m distance when disconnected from app.

2017-07-10 Zenmuse X5R v2017.07.10 first tracked

2017-07-10 Zenmuse X5 v2017.07.10 first tracked

2017-07-10 Zenmuse X3 v2017.07.10 first tracked

2017-07-10 Phantom 3 Standard v2017.07.10 first tracked

2017-07-10 Inspire 1 Pro/Raw v2017.07.10 first tracked

2017-07-10 Inspire 1 v2017.07.10 first tracked

2017-07-06 Phantom 3 Advanced v2017.07.06 first tracked

2017-07-06 Phantom 3 Professional v2017.07.06 first tracked

2017-06-29 Matrice 200 Series v01.0.0100 first tracked

2017-06-26 Inspire 2 v01.0.0330 v01.01.0010

2017-06-15 A3 v1.7.0.5 v1.7.1.5 This release adds ground collision detection, improves RTH behavior with GPS signal handling, enhances flight stability, and significantly…

2017-06-08 Phantom 4 Advanced v2017.06.08 first tracked

2017-06-05 Osmo Mobile v2017.06.05 first tracked

2017-05-11 A3 v1.7.0.0 v1.7.0.5 Stabilizes control channels during signal loss, adds SDK activation, and fixes maximum attitude angle limitation.

2017-05-09 Osmo Pro and Raw v2017.05.09 first tracked

2017-04-19 Datalink 3 v1.1.0.0 first tracked Added support for more flight controllers and enabled firmware updates through DJI Assistant 2.

2017-04-12 Inspire 2 v01.0.0240 v01.0.0330

2017-03-27 MG-1 v2017.03.27 first tracked

2017-03-02 Inspire 2 v01.0.0240 first tracked

2017-02-21 Zenmuse Z3 v1.9.1.40 v1.10.1.40 Removed flight restrictions for abandoned airports and extended motor stopping time to three seconds during flight.

2017-01-18 A3 v1.6.0.10 v1.7.0.0 Improved version matching with Assistant 2, enhanced backup recovery, and optimized SDK operations.

2017-01-05 A3 v1.5.0.0 v1.6.0.10 Adds support for Lightbridge 2 expansion kit, individual motor starting, and camera-map features with multiple system optimizations.

2017-01-05 D-RTK v2017.01.05 first tracked

2016-12-13 iOSD MARK II v2016.12.13 first tracked

2016-11-10 Zenmuse Z3 v1.9.1.40 first tracked Improved video transmission stability and reduced gimbal vibration with M600; fixed self-diagnosis issue.

2016-10-21 A3 v1.3.0.0 v1.5.0.0 Optimized control and IMU calibration with new flight modes and extended hardware support.

2016-06-13 A3 v1.3.0.0 first tracked Added support for new GNSS and compatible hardware, improved flight control and altitude stability, and optimized intelligent flight modes.

2016-01-14 Zenmuse Z15-A7 v2016.01.14 first tracked

2016-01-14 Zenmuse Z15-GH4 (HD) v2016.01.14 first tracked

2016-01-14 Zenmuse Z15-5D III (HD) v2016.01.14 first tracked

2016-01-14 Zenmuse Z15-BMPCC v2016.01.14 first tracked

2016-01-07 E1200 Standard v2016.01.07 first tracked

2016-01-07 Ronin Thumb Controller v2016.01.07 first tracked

2015-09-29 E310 v2015.09.29 first tracked

2015-08-06 E1200 Pro v2015.08.06 first tracked

2015-07-17 Naza-M v2015.07.17 first tracked

2015-07-17 Naza-M V2 v2015.07.17 first tracked

2015-06-12 Zenmuse H4-3D v2015.06.12 first tracked

2015-06-12 Zenmuse H3-3D v2015.06.12 first tracked