AnyTone AT-D878UVII Plus firmware
AnyTone · AT-D878UVII Plus · AT-D878UVII Plus · Handheld
Latest firmware for the AnyTone AT-D878UVII Plus is v4.00 (August 16, 2025).
Specifications
AT-D878UVII Plus specifications
- Type
- Amateur VHF/UHF transceiver
- Frequency range
- 136-174 / 400-480 MHz
- Modes
- FM / NFM / DMR (Tier I & II)
Show the full specification Hide the full specification
General
- Mode
- FM / NFM / DMR (Tier I & II)
- Type
- Amateur VHF/UHF transceiver
- Weight
- 282 g (9.95 oz), with 2100 mAh battery pack and antenna
- Power supply
- 7.4 VDC (Li-Ion battery pack)
- Tuning steps
- 5 / 6.25 KHz
- Other features
- Analog APRS (TX/RX) and DMR APRS (TX/RX). Roaming. Bluetooth. DTMF. 1.7" TFT display. 10000 talk groups and 500000 contacts. Auto-sense DMR or FM reception. VFO. GPS. CTCSS/PL. 2 & 5-tone selcall.
- Frequency range
- 136-174 / 400-480 MHz
- Dimensions (W*H*D)
- 61*129*39 mm (2.4*5.08*1.54")
- Frequency stability
- ±2.5 ppm @ -20 to +55°C (-4 to +131°F)
- Repeater shift / offset
- ±
- Channels / memory management
- 4000 regular
- Antenna impedance / connector
- 50 ohms / SMA
- Current drain / power consumption
- RX: ? mA TX: ? A
Miscellaneous
- Manufactured
- China, 202x-202x
Receiver Section
- Selectivity
- FM: 70 dB (Adjacent channel) NFM: 60 dB (Adjacent channel)
- Sensitivity
- FM: 0.25 uV (12 dB SINAD) NFM: 0.35 uV (12 dB SINAD) DMR: 0.3 uV (BER 5%)
- AF output power / speaker
- 1 W at 5% distortion / 16 ohm
Transmitter Section
- RF output power
- HighMidLow 1Low 2 2 m:7 W5 W2.5 W200 mW 70 cm:6 W5 W2.5 W200 mW
- Modulation system
- DMR: 4FSK
- Spurious emissions
- Better than -36 dB
- Microphone input level
- ? mV
- Max FM deviation (Factory set)
- FM: ±5 KHz NFM: ±2.5 KHz
- Microphone impedance / connector
- ? ohm / ?-pin
Changelog
AT-D878UVII Plus firmware changelog
-
v3.08Nv4.00Removed satellite mode to restore stability; fixed APRS CPS download. -
v3.07v3.08NFixed freezing when using background images; improved Bluetooth PTT button performance. -
v3.05v3.06Added separate TX/RX color codes and satellite APRS/CTCSS/DCS transmit, fixed APRS TX bug. -
v3.04v3.05Adds independent satellite power, fixes satellite prediction freezing, enables GPS beacon saving and side-key squelch control.
Firmware history
All versions below were published by AnyTone on anytone.net and qixiang.com. Third-party and modified firmware is never listed.
-
Removed satellite mode to restore stability; fixed APRS CPS download. — summary by updatemystuff.com
Source:
anytone.netRelease notes & downloadShow release notes Hide release notes
- Satellite Feature Removed – Satellite mode caused instability due to CPU space limitations. This update restores stability by removing it. If you need satellites, stay on V3.08N.
- APRS Download Fix – Corrected an issue that prevented APRS from downloading into CPS.
-
Fixed freezing when using background images; improved Bluetooth PTT button performance. — summary by updatemystuff.com
Source:
anytone.netRelease notes & downloadShow release notes Hide release notes
- Monitor function now opens speaker to white noise.
- Resolved freezing issues when using background images.
- Fixed reception problems with A+D or D+A settings.
- Corrected “Repeater Out of Range” voice notification.
- Fixed satellite TX frequency and pass accuracy.
- Improved Bluetooth reconnection for BT PTT buttons.
- Radio now remembers BT PTT button pairing after reboot.
-
Source:
anytone.netRelease notes & downloadShow release notes Hide release notes
- APRS reliability improvements.
- Restored GPS info menu “Edit” button.
- Corrected satellite AOS limit issue.
- Fixed missing audio when listening to satellites with SQ=0.
- Satellite name now displays correctly after loading data.
-
Added separate TX/RX color codes and satellite APRS/CTCSS/DCS transmit, fixed APRS TX bug. — summary by updatemystuff.com
Source:
anytone.netRelease notes & downloadShow release notes Hide release notes
- Added Maidenhead locator display in GPS data.
- APRS transmit enabled under Satellite menu (PTT+PF2).
- CTCSS/DCS transmit enabled under Satellite menu (PTT+PF1).
- Separate color codes for TX and RX in channel settings.
- Fixed APRS TX bug from V3.05.
- Eliminated 250ms silent transmission when STE=OFF.
- CPS now supports satellite data import/export in CSV format.
-
Adds independent satellite power, fixes satellite prediction freezing, enables GPS beacon saving and side-key squelch control. — summary by updatemystuff.com
Source:
anytone.netRelease notes & downloadShow release notes Hide release notes
- Satellite power can be set independently from channel power.
- Fixed freezing during satellite prediction.
- Satellite menu no longer auto-exits.
- CPS satellite update tool supports custom download links.
- Master ID option added for all-channel use.
- GPS info menu can now save fixed beacons.
- Added analog squelch level adjustment to side keys.
-
Source:
anytone.netRelease notes & downloadShow release notes Hide release notes
- Introduced Satellite Mode with prediction list, frequencies, and pass details.
- New green GPS icon design (by IK8JHL).
- CPS now supports ARC4 and AES256 key import/export.
-
Source:
anytone.netRelease notes & downloadShow release notes Hide release notes
- Faster scan speed (ignores short bursts).
- SMS modified for BrandMeister text capture.
- CPS restrictions on AES/ARC4 encryption readout.
- New “Dim Shut” key function to disable backlight/LED.
- AES encryption now uses variable vector (IV) for security.
-
Source:
anytone.netRelease notes & downloadShow release notes Hide release notes
- Added ARC4 encryption (Motorola-compatible).
- Option to adjust voice header repetitions for improved sync.
- Adjustable TX preamble for data transfer.
- Improved SMS compatibility.
- Call Alert now ETSI-compliant.
-
Source:
anytone.netRelease notes & downloadShow release notes Hide release notes
- Analog 5-Tone ID decode/encode standards aligned.
- AES256 keys can only be written, not read, for security.
-
Source:
anytone.netRelease notes & downloadShow release notes Hide release notes
- Added “None” option for RX Group List.
- Talk Group alerts can now be set individually.
- New global digital channel idle-state beep settings.
-
Source:
anytone.netRelease notes & downloadShow release notes Hide release notes
- Sub band defaults to OFF during GPS roaming.
- New APRS “Pass All” option (display packets with errors if enabled).
- Improved analog APRS receive performance.
- Fixed CPS export compatibility with Contact Manager.
-
Source:
anytone.netRelease notes & downloadShow release notes Hide release notes
- Repeater connectivity restored.
- Talker Alias now saved properly in CSV export.
- New Talker Alias check/uncheck tool in CPS.
- Fixed APRS frequency save issue.
- Fixed GPS roaming data save issue.
-
Adds APRS SMS messaging and zone hide function, improves repeater stability. — summary by updatemystuff.com
Source:
anytone.netRelease notes & downloadShow release notes Hide release notes
- Select TG and RX group list for new channels.
- Improved Single Frequency Repeater stability.
- Added APRS SMS function (send/receive messages via APRS).
- Device info now shows APRS board version.
- Added multiple analog APRS TX frequencies.
- New DCDM TS Split mode for repeater compatibility.
- GPS Roaming enhancements.
- Zone Hide function for display simplification.
- Drafts folder for unsent SMS.
- New GMT timezone support.
- APRS error-code verification toggle.
-
Source:
anytone.netRelease notes & downloadShow release notes Hide release notes
- FM radio toggle bug corrected.
- APRS auto TX interval sync corrected.
-
Display customization and separate analog/digital settings added. — summary by updatemystuff.com
Source:
anytone.netRelease notes & downloadShow release notes Hide release notes
- Date format selection on display.
- Option to hide channel type, timeslot, and color code.
- Separate idle tones for digital/analog.
- Auto scan startup option.
- Separate mic gain settings for analog and digital.
- APRS TX bandwidth option (wide/narrow).
- Expanded 2-Tone/5-Tone/DTMF auto-reset times.
- Added APRS coarse/speed info.
- Zone priority display now shows zone name.
-
Source:
anytone.netRelease notes & downloadShow release notes Hide release notes
- Expanded digital contact list (up to 500,000).
- Added Analog APRS Receive function (AT-D878UVII Plus).
- Logs include callsign, coordinates, direction, distance, and digipeater paths.
- CPS supports selective APRS receive filtering by callsign/SSID.
Watch the AT-D878UVII Plus for updates
Get an email the moment AnyTone publishes new firmware. Just your email — no account or password needed.