Yaesu FTDX10
firmware v1.15
Yaesu · Released Feb 29, 2024 · First seen Sep 6, 2026
Source:
yaesu.com
v1.15 is the latest firmware for the Yaesu FTDX10, released February 29, 2024.
In short — summary by updatemystuff.com
Fixes decoding halt during PTT transmission in RTTY/PSK modes and adjusts 50MHz repeater shift default.
- Decoding no longer stops when transmitting while RTTY/PSK screen is active
- 50MHz band repeater shift default changed from 1MHz to 500kHz
Written from Yaesu's release notes, which are printed in full below.
Was this useful? Thanks.
What's in this update
FTDX10 Firmware Update Information Download the FTDX10 [ FTDX10_Firmware_update_202402.zip] from the following website: https://www.yaesu.com/indexVS.cfm?cmd=DisplayProducts&ProdCatID=102&encProdID=1AB BC23C7EC57175A35CB0FDE7A639A0&DivisionID=65&isArchived=0 [FTDX10_Firmware_update_202402 ]zip Contains:
- MAIN: V01-15 /FTDX10_MAIN_V0115. SFL 2/29/24 (New)
- DISPLAY: V01-06 /FTDX10_DISPLAY_V0106. SFL 2/29/24 (New)
- DSP: V01-20 /FTDX10_IFDSP_V0120. SFL 8/1/23
- SDR: V01-00 /FTDX10_SDR_V0100. SFL 4/7/21
- AF: V01-00 /FTDX10_AFCPU_V0100. SFL 4/7/21
- Firmware_Ver_Up_Manual_ENG_FTDX10_2104- B 4/9/21 Implements improvements:
Update: MAIN V01-15 (2/29/24)
- Fixed the issue when sending from PTT, while the decoding screen (RTTY/PSK) is displayed, decoding stops.
- Changed the default value of 50MHz BAND repeater shift frequency (1MHz→500 kHz).
SD Card Preparation Refer to FTDX10 Operation Manual (2102K-CS-6) Page 78 [Formatting a SD card].
If you already have the above firmware versions, it is not necessary to update the FTDX10 again.
We hope this new firmware will increase your enjoyment of your FTDX10.
Thank you for choosing Yaesu radios.
If you have any problems or questions, please contact Yaesu Amateur Tech Support [email protected] .
Yaesu USA | 6125 Phyllis Drive | Cypress, CA 90630 | 714.827-7600 | FAX: 714.827-8100 http://www.yaesu.com
updatemystuff.com never hosts firmware files — always download from the official source.
Get it from YaesuWatch the FTDX10 for updates
Create a free account and get an email the moment Yaesu publishes new firmware.
Create account & watch