Yaesu FT5DR firmware
Yaesu · FT5DR · FT5DR · Handheld
Latest firmware for the Yaesu FT5DR is v1.21 (November 1, 2025).
Specifications
FT5DR specifications
- Type
- Amateur VHF/UHF transceiver
- Frequency range
- USA and Australia / TX: 144-148 / 430-450 MHz / RX: 0.5-1000 MHz (Cellular blocked in the US)
- Modes
- TX: FM / NFM / DV (Fusion/C4FM) / RX: AM / FM / NFM / WFM / DV (Fusion/C4FM)
Show the full specification Hide the full specification
General
- Mode
- TX: FM / NFM / DV (Fusion/C4FM) RX: AM / FM / NFM / WFM / DV (Fusion/C4FM)
- Type
- Amateur VHF/UHF transceiver
- Weight
- 282 g (9.95 oz), with SBR-14Li and antenna
- Power supply
- 3.6-7.4 VDC (Depending on battery pack) or 4-16 VDC external
- Tuning steps
- 5 / 6.25 / 8.33 / 9 / 10 / 12.5 / 15 / 20 / 25 / 50 / 100 KHz
- Other features
- CTCSS/PL with tone scan. DCS. DTMF. AMS. Audio recorder. Micro-SD card slot. Bluetooth. APRS (1200/9600bd). Built-in GPS. Band scope. VOX. Wires-X. Voltmeter. Attenuator (10 dB). IPX7 water proof. Clock and timer. Twin RX (Even dual DV!)
- Frequency range
- USA and Australia TX: 144-148 / 430-450 MHz RX: 0.5-1000 MHz (Cellular blocked in the US)
- Dimensions (W*H*D)
- 65*100*34 mm (2.44*3.94*1.34"), with SBR-14Li
- Frequency stability
- ±2.5 ppm @ -20 to +60°C (-4 to +140°F)
- Repeater shift / offset
- ±0 to 150 MHz in 50 KHz steps
- Channels / memory management
- 900 memories in up to 24 banks 50 sets of PMS channels 156 preset channels (WX/Marine/BC) Alpha tags up to 16 characters Priority function Non-volatile EEPROM storage
- Antenna impedance / connector
- 50 ohm / SMA
- Current drain / power consumption
- RX: 74-200 mA (Mono band) - 74-240 mA (Dual band) TX: Max 1.9 A
Miscellaneous
- Manufactured
- 2021-202x
Receiver Section
- Selectivity
- AM/FM: 12 KHz (-6 dB) 35 KHz (-60 dB)
- Sensitivity
- AM (10 dB S/N) 0.52-30 MHz: 3 uV 108-137 MHz: 1.5 uV FM (12 dB SINAD) 30-54 MHz: 0.35 uV 54-76 MHz: 1 uV 137-140 MHz: 0.2 uV 140-150 MHz: 0.16 uV 150-174 MHz: 0.2 uV 174-222 MHz: 1 uV 222-350 MHz: 0.5 uV 350-400 MHz: 0.2 uV 400-470 MHz: 0.18 uV 470-580 MHz: 1.5 uV 580-800 MHz: 3 uV 800-1000 MHz: 1.5 uV WFM (12 dB SINAD) 76-108 MHz: 1.5 uV DV/C4FM (BER 1%) 2 m/70 cm: 0.19 uV
- Receiver system
- Direct conversion (AM/WFM) Double conversion superheterodyne (FM/NFM) 1st IF: 58.05 MHz (A-band) - 57.15 MHz (B-band) 2nd IF: 450 KHz
- AF output power / speaker
- 1 W at 10% distortion / 8 ohm
Transmitter Section
- RF output power
- HighLow 3Low 2Low 1 2 m:5 W2.5 W1 W300 mW 70 cm:5 W2.5 W1 W300 mW NB! Output power above is with Li-Ion battery or external DC. With FBA-39 dry cell battery tray, the output power is below 1 W.
- Modulation system
- FM: Variable reactance DV/Fusion: 4FSK/C4FM
- Spurious emissions
- Better than -60 dB @ Hi and Low 3 output power
- Microphone input level
- ? mV
- Max FM deviation (Factory set)
- FM: ±5 KHz NFM: ±2.5 KHz
- Microphone impedance / connector
- ? ohm / ?-pin
Changelog
FT5DR firmware changelog
-
v1.21first tracked Extended APRS model detection to support additional radio models.
Firmware history
All versions below were published by Yaesu on yaesu.com. Third-party and modified firmware is never listed.
-
Extended APRS model detection to support additional radio models. — summary by updatemystuff.com
Source:
yaesu.comRelease notes & downloadShow release notes Hide release notes
FT5DR/FT5DE Firmware Update Information Refer to the Firmware Update Instruction Manual in each ZIP file. The latest versions are listed below with the release dates.
- MAIN Firmware Version 1.21 (11/17/25)
- SUB Firmware Version 1.10 (11/17/25) Currently we have two different destination versions of the FT5DR/FT5DE: USA (DST: USA/AUS), EXP (DST: EU/EXP).
- The firmware version for Japan is different from USA/AUS and EXP versions. Please check the latest firmware of the Japanese version on the Japan WEB site: http://www.yaesu.com/jp/amateur_index/product/ft5d/firmware.html Please open the Update Instruction Manual FT5DR/DE MAIN/SUB Update Instruction Manual (2409-E) and review the information before starting the update firmware.
Download the zip file “FT5D_USA_MAIN_Ver1.21_SUB_Ver1.10_Firmware_Update_2025_11.zip” or “FT5D_EXP_MAIN_Ver1.21_SUB_Ver1.10_Firmware_Update_2025_11.zip” for EXP destination versions from YAESU website files section: https://www.yaesu.com/product- detail.aspx?
Model=FT5DR&CatName=VHF/UHF%20Handhelds USA Version Package: FT5D_USA_MAIN_Ver1.21_SUB_Ver1.10_Firmware_Update_2025_11.zip
- MAIN(USA) Ver 1.21: [Folder] FT5D_MAIN_ver121(USA)
- SUB(ENG) Ver 1.10: [Folder] FT5D_SUB_ver110(ENG)
- FT5DR_DE_MAIN_SUB_Firmware_Ver_Up_Manual_ENG_2409 -E.pdf Important:
To update the SUB CPU, a USB driver is required separately from the Main CPU. EXP Version Package: FT5D_EXP_MAIN_Ver1.21_SUB_Ver1.10_Firmware_Update_2025_11.zip
- MAIN(EXP) Ver 1.21: [Folder] FT5D_MAIN_ver121(EXP)
- SUB(ENG) Ver 1.10: [Folder] FT5D_SUB_ver110(ENG)
- FT5DR_DE_MAIN_SUB_Firmware_Ver_Up_Manual_ENG_2409 -E.pdf
CAUTION
Please be sure to confirm the model and the version of your transceiver before starting the update. Writing incorrect firmware to the transceiver may cause abnormal operation or failure. Updates: MAIN Version 1.21 / SUB Version 1.10 (for web release) (November 2025)
- Added FTM-510D/FTM-310D/FTX-1 to APRS model detection.
If you already have Main v1.21 / SUB Ver 1.10 firmware versions, it is not necessary to update the FT5DR/FT5DE again.
We hope this new firmware will increase your enjoyment of the FT5DR/FT5DE.
Thank you for choosing Yaesu radios.
If you have any problems or questions, please contact Yaesu Amateur Tech Support [email protected].
Yaesu USA | 6125 Phyllis Drive | Cypress, CA 90630 | 714.827-7600 | FAX: 714.827-8100 http://www.yaesu.com
Watch the FT5DR for updates
Get an email the moment Yaesu publishes new firmware. Just your email — no account or password needed.