TASCAM Portacapture X6 firmware
TASCAM · Portacapture X6 · Video
Latest firmware for the TASCAM Portacapture X6 is v2.03 (September 8, 2025).
Changelog
Portacapture X6 firmware changelog
-
v1.01first tracked
Firmware history
-
Release notes & download
Show release notes Hide release notes
< Maintenance items >
- There was an issue where deleting a project mixed down with the POCKET STUDIO app would also remove other projects from the browse screen.
This has been fixed.
-
Release notes & download
Show release notes Hide release notes
< Maintenance items >
- Overdubbing was not possible on audio tracks mixed down with the POCKET STUDIO app. This has been fixed.
- When editing audio files recorded on this unit with iZotope RX and then exporting them using "Export Regions to Files", 100 identical files would be created.
This has been fixed.
- When VOICE was the app that launched at system startup, the input audio would not be mixed in mono, and only the audio from the left channel would be recorded.
This has been fixed.
- Operation stability has been improved in other ways.
-
Release notes & download
Show release notes Hide release notes
< Maintenance items >
- The following issues that occurred in the VOICE, PODCAST, MUSIC, FIELD, and ASMR apps have been fixed.
- When the size of a file exceeded 4 GB during recording, recording would end without a new file being automatically created.
- Recording would continue even after the time set for TIME FILE INCREMENT had elapsed.
-
Release notes & download
Show release notes Hide release notes
< New functions >
- MTR application "POCKET STUDIO" has been added.
- A tuner application has been added.
- When recording in MANUAL mode, two mixes were recorded at the same time, but the user can now choose whether to record or not.
- EXPANDED PRE REC mode has been added to the prerecording function available when using the FIELD app.
< Maintenance items >
- When AUTO TONE was turned on and HOLD was selected immediately after recording started, AUTO TONE would not turn off. This has been fixed.
- When a confirmation pop-up "Is the AC adapter 1.5A or more?" appeared while a phantom power on confirmation pop-up was displayed, the phantom power on confirmation pop-up would disappear. This has been fixed.
- When mixing down large size files while connected via Bluetooth, the system would hang up. This has been fixed.
- Timecode synchronization stability with compatible Atomos products has been improved.
- When switching from the PODCAST app to another app, the recording format settings that were made prior to the PODCAST app are now restored.
- The display of remaining alkaline battery charge has been adjusted.
- Operation stability has been improved in other ways.
-
Release notes & download
Show release notes Hide release notes
< New functions >
- Chinese fonts that comply with the GB18030-2022 standard are now supported.
< Maintenance items >
- When overdubbing and punch in/out operations were conducted in the MANUAL app, recording data would not be stored in extremely rare cases.
This has been fixed.
- Operation stability has been improved in other ways.
-
Release notes & download
Show release notes Hide release notes
< New functions >
- Unit settings and recording app settings can now be saved in up to 3 USER SETTINGS and recalled with a single tap from the LAUNCHER screen.
- INPUT SETTINGS, including for the low-cut filter, compressor, limiter, auto gain control, noise gate and other effect functions can now be saved in up to 3 presets and loaded in each recording app.
- Audio interface functions now support the 32 bit float format.
The 32 bit float function, which enables the preservation of audio resolution even after adjusting levels, can now also be used when recording to a DAW using this unit as an audio interface. Note: For use with Windows, download the latest ASIO driver (V1.30).
- Support has been added for wireless timecode synchronization with compatible Atomos products, including AtomX Sync, UltraSync BLUE, ATOMOS CONNECT and Shogun CONNECT.
Note: An AK-BT1 Bluetooth adapter (sold separately) is necessary.
- The USB MIX MINUS function can now be used in the PODCAST app.
This can suppress the occurrence of echoes in audio from remote participants when capturing podcasts.
- In addition to built-in mic input, selecting PAD and USB input is now possible when using the PODCAST app.
- When the Portacapture Control remote control app is communicating in the background on a device, for example, connection with the unit will no longer be interrupted, even if the device itself enters energy-saving mode.
Note: This is supported by Portacapture Control version 1.33 and later. Use of Portacapture Control requires an AK-BT1 Bluetooth adapter, which is sold separately.
< Maintenance items >
- Reverb settings would sometimes change during app and preset selection. This has been fixed.
- Sometimes Manual EQ presets could not be saved for inputs 3 and 4 in 2-channel apps. This has been fixed.
- Sometimes the dB display of tracks linked on the INPUT SETTINGS Screen would not be updated. This has been fixed.
- Mark name data would not be shown properly for files that exceeded 2 GB. This has been fixed.
- Operation stability has been improved in other ways.
-
Version
1.02First seen Aug 8, 2026Release notes & downloadShow release notes Hide release notes
< Maintenance items >
- The unit would not start up properly on rare occasions. This has been fixed.
-
Version
1.01First seen Aug 8, 2026Release notes & downloadShow release notes Hide release notes
< Maintenance items >
- Operation stability has been improved.
UPDATER: TASCAM Update Manager V1.01 for Windows < Maintenance items >
- In Windows 11, when connecting to a supported product, eight instances of the same product would appear, preventing the update from running. This has been fixed.
Watch the Portacapture X6 for updates
Get an email the moment TASCAM publishes new firmware. Just your email — no account or password needed.
