Skydio Release Notes (X10) firmware v40.273

Release Date February 5, 2026

Skydio X10 Controller version Battin (41.34.13)

Skydio X10 drone version Battin (40.273)

[accordion heading="Flight System Update"]

Note: This update will be released gradually. Do not update your system while the drone is in flight. Non-Dock Systems

• Update the X10 Controller
• Update Skydio X10
• Follow your organization’s maintenance log update procedure

Read How to update Skydio X10 for step-by-step instructions. [/accordion] Action Required: Parachute Compatibility Update

Warning: Your Skydio X10 or Dock for X10 Flight System must be updated to the listed version (or later) before operating w​ith Parachute installed.

Connecting a Parachute to a prior version of the Battin software may permanently render the Parachute inoperable, requiring hardware replacement.

This applies to all Skydio X10 system configurations, both Dock-based and controller-based systems.

If the Parachute is rendered inoperable, a critical error is displayed on the X10 Controller and in Skydio Cloud, and Parachute functionality is unavailable.

Failure to follow this guidance may increase the risk of serious bodily injury and/or property damage.

Prior to operating or performing maintenance, review the safety information at skydio.com/safety.

This release includes a fix that addresses Parachute Attachment compatibility for controller-flown systems and prevents issues during initial setup.

• Resolves an issue where Parachute becomes unusable when connected to a drone running an earlier version Battin software.

Icing Detection Alerts on X10 Controllers Cold, wet conditions can cause ice to form on rotor blades, reducing lift and flight stability.

Vehicle Icing Detection introduces a critical new safety feature that helps prevent incidents during cold and wet conditions by automatically identifying early signs of icing and alerting you before perf​ormance is affected.

For example, the drone detects icing during an automated mission while the remote operator is unaware of local moisture conditions.

The prompt enables early corrective action before flight control degradation occurs.

• Continuously monitors flight performance and detects reduced lift or increased drag that may indicate ice buildup
• Icing alerts may appear in temperatures up to 46°F (8°C)
• Enabled by default (no setup or setting configuration required)
• Review the Skydio Winter Operations Guidance

Note: Icing detection provides an early warning but does not automatically return or land the drone. Additional Fixes

• Resolves an issue affecting 3D Scan post-processing