Fujifilm X-T3 firmware

Firmware history

1. Version 5.11 Latest Released Mar 28, 2024 First seen Jul 4, 2026
   Show release notes Hide release notes

   The firmware update Ver.5.11 from Ver.5.10 incorporates the following ​issues:

   • A firmware bug is fixed that the exposure of the preview image and the recorded image are different from each other when shooting manually with the XF50mmF1.0 R WR, which has a​ bright aperture F value
   • A firmware bug is fixed that the images taken were not saved to the memory card in the camera in case that the image transfer setting to “FUJIFILM XApp” or “FUJIFILM Camera Remote” is set to “AUTO IMAGE TRANSFER ORDER”.
   Release notes & download
2. Version 5.10 First seen Jul 4, 2026
   Show release notes Hide release notes

   The firmware update Ver.5.10 from Ver.5.01 incorporates the following issues:

   • Aperture control parameters have been optimized to improve exposure tracking function during zoom operation when using the following interchangeable lens.

   [Target interchang​eable lens]

   • XF16-55mmF2.8 R LM WR：Ver.1.30 or later Note: Make sure to update the camera firmware to the latest firmware before updating the firmware of the interchangeable lens to enable those functions above.
   • The firmware bug is fixed tha​t a image becomes abnormal color tone in rare cases under the following configuration conditions.
   • SHUTTER TYPE：ES ELECTRONIC SHUTTERES
   • DRIVE SETTING：High-speed burst
   • AF/MF SETTING：RELEASE PRIORITY or MF
   • SHUTTER SPEED：1/2.5, 1/5 or 1/6
   • Other minor bugs are fixed.
   Release notes & download
3. Version 5.01 First seen Jul 4, 2026
   Show release notes Hide release notes

   The firmware up​date Ver.5.01 from Ver.5.00 incorporates the following issues:

   • The firmware bug is fixed that the camera freezes under the following shooting conditions after updating to Ver.5.00.
   • DRIVE DIAL: ADV
   • IMAGE QUALITY: “FI​NE + RAW” or “NORMAL + RAW”
   • Oher minor bugs are fixed.
   Release notes & download
4. Version 5.00 First seen Jul 4, 2026
   Show release notes Hide release notes

   The firmware update Ver.5.00 from Ver.4.52 incorporates the following issues: Regarding the details of No.2, 3, 4, 5 and 6, download the “X-T3 New Features Guide［Ver.5.00]” from our website.

   • X-T3 New Features Guide: English, Français, Deutsch, Español, Italiano, Nederland, Polski, Svenska, Norsk, Dansk, Pусский, Suomi, 中文简, 中文繁體, 한국어, ภาษ​าไทย, Arabic
   • The firmware for each model supports new application software “FUJIFILM XApp” for GFX and X series cameras.

   “FUJIFILM XApp” is the advanced application software for the current one, “FUJIFILM Camera Remote”, with which wireless communication becomes more stable and faster so that images and movies transportation from the camera becomes more smooth and comfortable with the smartphone and tablet terminal.

   Moreover, the operation with the smartphone and tablet terminal becomes much simpler than the current application software, since all the data transportation operations, except for the “Bluetooth Pairing” between camera and the application software required at the first time only, are completed with the smartphone and tablet terminal.

   Adding on the “Live View Mode” and access/download functions of the data in camera, several new functions are available, such as “Backup/Restore” to store the setting data in the shooting and setup menus, “Timeline” to review the shooting information of the camera/lens, shooting count/location, etc. and “Activity” to show the accumulated summary of the shooting count total, film simulation usage, etc., which should make GFX and X series cameras attractive more and more.

   Note-1: Please see NEWS RELEASE for the details of “FUJIFILM XApp”.

   Fujifilm releases the FUJIFILM XApp for the GFX / X Series of digital cameras Note-2: “FUJIFILM XApp” works with iOS/iPad OS 13 or later and Android OS 11 or later.

   Please download the “FUJIFILM XApp” from the following site by selecting the OS version of your smartphone / tablet terminal and the camera. “FUJIFILM XApp” Download Site Note-3: “FUJIFILM XApp” will be available as soon as it is ready.

   • “AREA SETTING” has been added in the “USER SETTING” of the Setup menu, which changed the operation procedure for the initial setting and “TIME DIFFERENCE” setting as follows.
   • 24 hours display can be selected in “DATE/TIME”.
   • Your living location can be selected with the world map as well as “Saving time” can be on and off in “AREA SETTING”.
   • “LOCAL” can also be selected with the world map in “TIME DIFFERENCE”.

   Note-1: “ARIA SETTING” and “DATE/TIME” menus appear when turning on the camera right after firmware upgrade. So please set up the above items in these menus.

   • “RESET” function in the Set​up menu will change.
   • “AREA SETTING” has been added on the list that would not be reset in “SET-UP RESET” function.
   • “INITIALIZE” function has been added to reset all settings to default values, other than except for custom white balance.
   • Some of the menu related to the wireless connection changed as follows.
   • “Bluetooth SETTINGS” in “CONNECTION SETTING” of the Setup menu has been changed to “Bluetooth/SMARTPHONE SETTING” and “IMAGE TRANSFER WHILE POWER OFF” has been added in this menu.
   • “AUTO IMAGE TRANSFER” has been changed to “AUTO IMAGE TRANSFER” and “SMARTPHONE SYNC. SETTIN” has been changed to “SMARTPHONE LOCATION SYNC” for each.
   • Some of the menu items of “GENERAL SETTINGS” in “CONNECTION SETTING” of the Setup menu has been change as follows.
   • “NAME” and “RESIZE IMAGE FOR SMARTPHONEH 3M” has been moved into “Bluetooth/SMARTPHONE SETTING” menu.
   • “GEOTAGGING” has been moved into “SAVE DATA SET-UP” menu.
   • “LOCATION INFO” has been moved into “SCREEN SETUP” menu.
   • “〔Wi-Fi〕 BUTTON SETTING” has been moved into “BUTTON/DIAL SETTING” menu and changed to “Fn1 BUTTON SETTING”.
   • “Bluetooth Pairing Registration” has been added in “FUNCTION (Fn) SETTING” while pushing and holding the DISP/BACK” button, which changed the procedure to connect to the smartphone.
   • FUJINON lens, XF8mmF3.5 R WR has been available.
   Release notes & download
5. Version 4.52 First seen Jul 4, 2026
   Show release notes Hide release notes

   Revised specification from Ver.4.51 to Ver.4.52

   • The firmware bug has been fixed, which caused that the focus cannot be adjusted by operating the Manual Focus Ring during movie recording when using the following len​ses.
   • FUJINON LENS XF14mm F2.8 R
   • FUJINON LENS XF16mm F1.4 R WR
   • FUJINON LENS XF23mm F1.4 R
   • The firmware bug has been fixed, which caused that the Live View display became black out and camera froze at changing “AF Area” in the display while t​aking “Live View Shooting” using Wi-Fi connection with smartphone applications (FUJIFILM Camera Remote) under the following conditions.
   • “NUMBER OF FOCUS POINTS” in “AF/MF SETTING” menu is set to 425 POINTS (17 × 25).
   • “FOCUS MODE” is set to “AF-S” or “AF-C”.
   Release notes & download
6. Version 4.51 First seen Jul 4, 2026
   Show release notes Hide release notes

   Revised specification from Ver.4.​50 to Ver.4.51

   • The firmware bugs have been fixed, which caused that the cameras rarely froze right after the completion of the firmware update with the current version using a smartphone (tablet) in which Camera Remote application software was installed.

   Note: When ​updating the firmware with the revised version, please be sure to update the firmware using an SD card according to steps below. Detail of firmware update steps

   Release notes & download
7. Version 4.50 First seen Jul 4, 2026
   Show release notes Hide release notes

   Revised specification from Ver.4.40 to Ver.4.50 Please refer to the “X-T3 New Features Guide” for information on the following item No.1 that has been updated.

   For the “Tripod Grip (TG-BT1)” initial settings a​nd operating instructions, please download the “Tripod Grip (TG-BT1) User’s Manual” from our website.

   • X-T3 New Features Guide: English, Français, Deutsch, Español, Italiano, Nederland, Polski, Svenska, Norsk, Dansk, Pусский, Suomi, 中文简, 中文繁體, 한국어, ภาษาไทย, Arabic
   • Tripod Grip (TG-BT1) User’s Manual: English, Français, Deutch, Español, ​Italiano, 中文简, Arabic
   • “Tripod Grip (TG-BT1)” has been available.

   When the camera and “Tripod Grip (TG-BT1)” are connected via Bluetooth, you can shoot still images and movies(*1) while holding the grip, as well as zoom in on lenses(*2) with an electric zoom function .

   • 1 Change the camera to movie mode, when shooting movies.
   • 2 The XC15-45mmF3.5-5.6 OIS PZ will be compatible in January 2023.
   • Other minor bugs have been fixed.
   Release notes & download
8. Version 4.40 First seen Jul 4, 2026
   Show release notes Hide release notes

   Revised specification from Ver.4.30 to Ver.4.40 Regarding the detail of the improvements, download the “X-T3 New Features Guide” from our website.

   New Features Guide: English, Français, Deutsch, Español, Italiano, Nederland, Polski, Svenska, Norsk, Dansk, Pусский, Suomi, 中文简, 中文繁體, 한국어, ภาษาไทย, Arabic

   • The following operational flow and functions of the zooming and focusing in the camera menu were added or changed.
   • “TOUCH ZOOM” function was added in the “TOUCH SCREEN SETTING” menu, which is called through the operation flow below.

   [ SETUP MENU ] ➔ [ BUTTON/DIAL SETTIN​G ] ➔ [ TOUCH SCREEN SETTING ]

   • “POWER ZOOM LENS FUNCTION(Fn) SETTING” menu to allocate the “Fn” button for the power zoom lens functions was added in “BUTTON/DIAL SETTING” menu, which is called through the operation flow below.

   [ SETUP MENU ] ➔ [ BUTTON/DIAL SETTING ]

   The functions added are “ZOOM/FOCUS CONTROL RING”, “CONSTAN SPEED ZOOM (T/W)” and “CONSTAN SPEED FOCUS (N/F)”.

   • “LENS ZOOM/FOCUS SETTING” menu was added in “BUTTON/DIAL SETTING” menu, which is called through the oper​ation flow below.

   [ SETUP MENU ] ➔ [ BUTTON/DIAL SETTING ]

   The functions added are “CONSTANT SPEED ZOOM (8 steps)”, “CONSTANT SPEED FOCUS (8 steps)”, “CONSTANT SPEED ZOOM/FOCUS (Fn) OPERATION”, “START/STOP SWITCH & ACTIVE WHILE PRESSING”, “ZOOM RING ROTATE” and “ZOOM/FOCUS CONTROL RING”.

   • “FOCUS RING” and “FOCUS RING OPERATION” settings were moved to “LENS ZOOM/FOCUS SETTING” menu which is called through the operation flow below and the inscription of the “FOCUS RING” was changed to “ FOCUS RING ROTATE”.

   [ SETUP MENU ] ➔ [ BUTTON/DIAL SETTING ] ➔ [ LENS ZOOM/FOCUS SETTING ]

   • Exposure adjustment function for the pre-view image/movie has been enhanced by optimizing the parameters for the exposure control when XF150-600mm is used.
   • “AF+MF” function has been available even at movie taking.
   Release notes & download
9. Version 4.30 First seen Jul 4, 2026
   Show release notes Hide release notes

   Revised specification from Ver.4.20 to Ver.4.30

   • FUJINON l​ens, XF150-600mmF5.6-8 R LM OIS WR has been available.
   • The accuracy of AF function has been improved at manual focus mode using “O​ne-Push AF”.
   • Other minor bugs have been fixed.
   Release notes & download
10. Version 4.20 First seen Jul 4, 2026
    Show release notes Hide release notes

    Revised specification from Ver.4.12/4.13 to Ver.4.20

    • The following specification has been revised to improve compatibility with SDXC memory card format.

    The maximum number of frames that can be recorded in a si​ngle folder has been changed from 9,999 to 999.

    If you are using a macOS computer to process recorded files in the SDXC memory card, make sure to follow the procedure below before upgrading the firmware.

    Follow the ins​tructions in “II-2.

    If using an SDXC memory card with existing files or one that has not been recently formatted:” in the article titled “Important notice for consumers processing FUJIFILM digital camera files using macOS” that was published on Feb. 2 in this web site and then format the SDXC memory card before using it.

    Release notes & download
11. Version 4.12 First seen Jul 4, 2026
    Show release notes Hide release notes

    The firmware update Ver.4.12 from Ver.4.11 incorporates the f​ollowing issues:

    • The electronic level display will work in wider range of the tilt angle, so that you can use the electronic level on the LCD even if you tilt the camera m​ore than that with the current firmware.
    • Minor bugs have been fixed.
    Release notes & download
12. Version 4.11 First seen Jul 4, 2026
    Show release notes Hide release notes

    The firmware update Ver.4.11 ​from Ver.4.10 incorporates the following issues:

    • When using the Shoe mount flash EF-X8, the display of the FLASH SETTING is changed from “SUPPLIED FLASH” to “EF​-X8”.
    • The phenomenon is fixed that an image cannot be played back with a specified file name created by the EDIT FILE NAME function.
    • Fix of minor bugs.
    Release notes & download
13. Version 4.10 First seen Jul 4, 2026
    Show release notes Hide release notes

    The firmware update Ver.4.10 from Ver.4.00/4.01 incorporates the following issues:

    • Display of IP ADDRESS in Setup Menus > CONNECTION SETTING > INFORMATION is ​added.
    • Improvement of shutter speed setting for TTL slow sync flash shooting In P and A mode, this firmware makes the slowest shutter speed slower than 1/8 sec. for the shoot​ing used in a scene where relatively long exposure is required (ex. a flash shooting with night view background). In case the shutter speed setting is AUTO, the shutter speed becomes max. 4 sec in P mode and max. 30 sec. in A mode.
    • Fix of minor bugs.
    Release notes & download
14. Version 4.00 First seen Jul 4, 2026
    Show release notes Hide release notes

    The firmware update Ver.4.00 from Ver.3.30 incorporates the following issues: Regarding the detail of the improvements, download the “X-T3 New Features Guide” from our website.

    New Features Guide: English, Français, Deutsch, Español, Italiano, Nederland, Polski, Svenska, Norsk, Dansk, Pусский, Suomi, 中文简, 中文繁體, 한국어, ภาษาไทย, Arabic

    • The update will improve the autofocusing performance of the X-T3 to the same level as the “FUJIFILM X-T4”(X-T4).

    1. The fastest AF speed has been improved from 0.06 seconds to 0.02 seconds, equivalent to the performance of the X-T4.
    2. The algorithm fo​r predicting subject movements has been updated.
    3. AF tracking performance has been doubled*. Press the shutter button halfway down when a subject is in the focus area to maintain focus on the subject with a higher level of accuracy.
    4. The Face Tracking / Eye AF performance has been upgraded. The algorithm has been re-written to double* the tracking performance of the Eye AF in continuous shooting modes.
    5. The update allows the camera AF to work in low light levels down to -7EV*, facilitating fast and highly-accurate phase detection AF even in near darkness.
    6. The new firmware adds the “Focus Limiter” function which gives a pre-define specific focus range.

    • When compared with the Firmware Ver.3.30.
    • When using the FUJINON Lens XF50mmF1.0 R WR.
    • ​Other improvements.

    1. The size of the Single AF point can be adjusted during video recording.
    2. Photo ratings can be read by third-party software, allowing users to find their favorite pictures quickly.
    3. The focus point can be changed by the focus lever during AE lock.
    4. The default setting of the AF-S PRIORITY SELECTION in the RELEASE/FOCUS PRIORITY of the SHOOTING menu is changed to FOCUS from RELEASE.

    • Fix of minor bugs.
    Release notes & download
15. Version 3.30 First seen Jul 4, 2026
    Show release notes Hide release notes

    The firmware update Ver.3.30 from Ve​r.3.21 incorporates the following issues:

    • Camera performance used with the XF50mmF1.0 R WR is optimized.
    • The phenomenon is fixed that in a multiple-flash shooting where the EF-X500 is used as a commander, flashes in ​some groups sometimes don’t fire correctly. Also in case the EF-X500 is used as a commander and the EF-60 as a remote flash, upgrade the camera firmware to the latest version.
    • Fix of minor bugs.
    Release notes & download
16. Version 3.21 First seen Jul 4, 2026
    Show release notes Hide release notes

    The firmware update Ver​.3.21 from Ver.3.20 incorporates t​he following:

    • Fix of minor bugs.
    Release notes & download
17. Version 3.20 First seen Jul 4, 2026
    Show release notes Hide release notes

    The firmware update Ver.3.20 from Ver.3.10 incorporates the following:

    • Enhanced autofocus.
    • Improving the tracking performance of the eye AF frame, making it easier to attain accurate autofocus on the eyes.
    • Improving face-detection performance when there are faces of different sizes within the same frame, mak​ing it easier to attain accurate autofocus.
    • Improving autofocus capability on a foreground subject even when there is a mixture of foreground and background subjects within a AF frame, causing the foreground subject to go out of focus, e.g. when shooting flowers against a busy background.
    • Capability to save up to 9,999 pictures in each folder.

    Until now, the number of pictures that can be saved in a folder on an SD card was limited to 999. ​This update will raise the limit by ten times to 9,999 pictures.

    • The phenomena below during a movie shooting are fixed.
    • Focus hunting at the minimum aperture.
    • A black line can sometimes appear on the bottom of the center.
    • Fix of minor bugs.
    Release notes & download
18. Version 3.10 First seen Jul 4, 2026
    Show release notes Hide release notes

    The firmware update Ver.3.10 from Ver.3.01 incorporates the following issues: Regardin​g the details of No.1, download the “X-T3 New Features Guide” from our website.

    New Features Guide: English, Français, Deutsch, Español, Italiano, Nederland, Polski, Svenska, Norsk, Dansk, Pусский, Suomi, 中文简, 中文繁體, 한국어, ภาษาไทย, Arabic

    • Gimbal / Drone support (*) This firmware adds the following function to complement the current support for still image shooting via USB communications:
    • Starting and ending video recording
    • Adjusting exposure settings (exposure mode, shutter speed, aperture, ISO sensitivity, exposure compensation) for video recordi​ng
    • Making manual focus adjustments for video recording
    • This is the function via USB communication. About supported gimbals and drones, refer to support information not only on our website but also manufacturers’ websites.
    • Fix of minor bugs.
    Release notes & download
19. Version 3.01 First seen Jul 4, 2026
    Show release notes Hide release notes

    The firmware update Ver.3.01 from Ver.3.00 incor​porates the following issue:

    • The phenomenon is fixed that in rare cases, the message of “TURN OFF THE CAMER​A AND TURN ON AGAIN” can appear in the drive mode of “S” when you repeatedly and rapidly take photos in a short time.
    Release notes & download
20. Version 3.00 First seen Jul 4, 2026
    Show release notes Hide release notes

    The firmware update Ver.3.00 from Ver.2.10 incorporates the following issues: Regarding the details of No.2,4 and 8 download the “X-T3 New Features Guide” from our website.

    New Features Guide: English, Français, Deutsch, Español, Italiano, Nederland, Polski, Svenska, Norsk, Dansk, Pусский, Suomi, 中文简, 中文繁體, 한국어, ภาษาไทย, Arabic

    • Strengthened the accuracy of face / eye detection AF performance The AF algorithm has been improved along with the accuracy of face / eye detection AF. The ability to detect faces in the distance has been enhanced by approximately 30% and AF tracking is now more stable, even when an obstacle appears in the way. The improvements in AF are applicable to both still photos and video recording.
    • New Face Select functio​n The Face Select function has been introduced to provide priority auto-focus, tracking and exposure on a selected subject when multiple faces have been detected. The priority face can be selected by using the touch screen or focus lever.
    • Faster AF speed for subjects at a distance A Double Tap Setting and Touch Function has been added to the touch screen settings*. The two settings must be set to OFF to provide a better touch screen response. These new settings allow a more intuitive touch operation when shooting, AF and focus area select.
    • Intuitive operation of touch screen A Double Tap Setting and Touch Function has been added to the touch screen settings(*1). The two settings must be set to OFF to provide a better touch screen response. These new settings allow a more intuitive touch operation when shooting, AF and focus area select.
    • 1：By default, Touch Screen Setting, Double Tap Setting and Touch Function are set to all OFF. Touch Screen Setting must be set to ON to use the touch screen function.
    • Focus frame when EYE DETECTION SETTING When using EYE DETECTION SE​TTING, only focus frame on eye is displayed.
    • Improvement of AF/AE area tracking when using EVF When using the EVF, tracking function for AF/AE area movement by touch screen is improved.
    • Push function of the Focus stick when INTERVAL TIMER SHOOTING The push function is disabled when INTERVAL TIMER SHOOTING.
    • FLICKER REDUCTION function The options are changed from ON/OFF to ALL FRAMES/FIRST FRAME/OFF. And when choosing FIRST FRAME, the speed of CH continuous shooting is improved.
    • Message when IMAGE TRANSFER ORDER If there is no image of TRANSFER ORDER when turning on a camera, no message appears.
    • Fix of slight defects.
    Release notes & download
21. Version 2.10 First seen Jul 4, 2026
    Show release notes Hide release notes

    The firmware update Ver.2.10 from Ver.2.00 incorporates the following issues: Regardi​ng the details of No.1 download the “X-T3 New Features Guide” from our website.

    New Features Guide: English, Français, Deutsch, Español, Italiano, Nederland, Polski, Svenska, Norsk, Dansk, Pусский, Suomi, 中文简, 中文繁體, 한국어, ภาษาไทย, Arabic

    • Recording over 4GB movie file as one file Movie files are no longer split when the file reaches 4GB file size. The file is recorded as one file providing an SD memory card greater than 32GB is used (excludes 32GB) (*1).
    • 1：By using SD memory cards less than or equal to 32GB​, movie recording will continue without interruption when the file size reaches 4GB, however subsequent footage will be recorded to a separate file.

    Note：Format SD memory cards before first use, and be sure to reformat all memory cards after using them in a computer or other device.

    • Fix of slight defects.
    Release notes & download
22. Version 2.00 First seen Jul 4, 2026
    Show release notes Hide release notes

    The firmware update Ver.2.00 from Ver.1.02 incorporates the following issues: Regarding the details of No.1,3 and 6 download the “X-T3 New Features Guide” from our website.

    New Features Guide: Englis​h, Français, Deutsch, Español, Italiano, Nederland, Polski, Svenska, Norsk, Dansk, Pусский, Suomi, 中文简, 中文繁體, 한국어, ภาษาไทย, Arabic

    • 4K HDR video recording in Hybrid Log Gamma (HLG) Supports 4K HDR video recording in the Hybrid Log Gamma (HLG), one of the formats defined in the ITU-R BT.2100 international standards (*1). It allows the capture of rich and realistic images in a scene where there is a huge gap between highlight and shadow, or subjects with high color saturation.
    • 1：Only compatible with H.265(HEVC). Please enjoy with television or display compatible with HLG formats.
    • Simultaneous output of Film Simulation and F-Log footage (*2) Supports simultaneous output of Film Simulation and F-Log footage. It allows you to record in F-Log while checking Film Simulation image on an external monitor.
    • 2：Not compatible with 59.94P/50P, FHD high speed rec., 4K interframe NR, and HDMI output info display mode. Also, cannot choose diff​erent image size (4K/FHD) for HDMI output and internal SD card recording.
    • Display color temperature (Kelvin) on EVF/LCD Color temperature (Kelvin) can be displayed on EVF/LCD.
    • Supports slower shutter speeds with DCI4K/4K 29.97P/25P/24P/23.98P (*4) Slower shutter speeds than the framerate can be selected with 4K 29.97P/25P/24P/23.98P. *4：Cannot select slower shutter speed than framerate with DCI/4K 59.94P/50P or DCI4K/4K/FHD Long GOP recording. For detail, refer to the Shutter Speed in the “Movie Recording Mode” list.
    • Compatible with ALL-Intra and maximum bitrate 400Mbps with H.264 Using H.264 compression, you will now to be able to select ALL-Intra at a maximum bitrate of 400Mbps.
    • Display power supply icon Power supply icon is displayed on EVF/LCD while using AC adapter (AC-9VS), or Anker PowerCore+ 26800 PD (*5) and Anker PowerCore Speed 20000 PD (*6).
    • 5：Anker and PowerCore are trademark or registered trademark of Anker Innovations Limited or associated companies.
    • 6：Product may not be available on your country.
    • Fix of slight defects.
    Release notes & download
23. Version 1.02 First seen Jul 4, 2026
    Show release notes Hide release notes

    The firmware update Ver.1.02 from Ver.1.01 incorporates the following issues:

    • The phenomenon is fixed that in rare cases, the butt​ons cannot be used while using histogram display or sports finder.
    • The phenomenon is fixed that in rare cases, RAW image cannot be ​recorded normally under a certain conditions (Sports finder mode, continuous shooting with electronic shutter and so on)
    • Fix of slight defects.
    Release notes & download
24. Version 1.01 First seen Jul 4, 2026
    Show release notes Hide release notes

    The firmware update Ver.1.01 from Ver.1.00 incorporates the following issues:

    • C​ompensation of distortion is optimized in CH shooting with electronic shutter.
    • The phenomenon is fixed that the mechan​ical LOCK of some SD cards is not recognized.
    • Fix of other slight defects
    Release notes & download