DJI Matrice 200 Series V2 firmware v01.00.0590

? Aircraft:

• When using the X7 camera:

Added the photo ratio of 3:2 and a mechanic shutter option.

• The photos captured in each flight mission are saved to a subfolder under the “survey” folder in the microSD card.
• Added lens calibration in manual focus mode when using the X5S or X7 cameras.
• Added a function to adjust the shutter, aperture, and ISO values using the camera setting dial and corresponding buttons on the remote controller when using the X4S, X5S, or X7 cameras.
• Reduced camera display jitter when flying with the X5S and a zoom lens, such ​as Olympus 14-42 mm or Panasonic Lumix 14-42 mm.
• Reduced aircraft fan noise when taking off in the simulator in DJI Assistant 2.
• Fixed the abnormal aircraft status when taking off with the Downward Vision System obstructed.
• Fixed the issue where the RTH altitude could not be set to the max value after GEO zones have been unlocked.
• Fixed the rare issue where there was no camera preview in the app when using a PSDK payload.
• Fixed the issue where calibration failed after the GPS was interfered when using the M210 V2 with an external GPS kit.
• For the M210 RTK V2:

Improved mapping accuracy when using the X7 camera with a 35 mm lens or 24 mm lens. The PPK raw data will be saved to the same folder as the photo​s. Added the detailed RTK status information in the photo information. Remote Controller:

• Added function to disable the gimbal control using the left and right dials on the remote controller during Mission Flight to avoid false trigger.
• Added a function to transfer the PSDK data to a display device via HDMI.
• Added a function to customize the control stick mode for the Secondary remote controller in Dual Remote MATRICE 200 SERIES V2 Release Notes http://www.dji.com/matrice-200-series-v2 Controller mode. *
• Added a function to focus in manual focus mode by using the focus adjustment knob. *
• Added a function to recenter the gimbal pan. Tap the corresponding button in gimbal settings in the app to recenter, only the gimbal pan.
• D-RTK 2 Mobile Station for Matrice Series:
• Added a data copy function. Connect the D-RTK 2 to the computer to copy the RTCM data directly.