Connect Systems CS800D firmware v30.16

You can update your radio from whatever version you have to this version without having to go through any intermediate steps. SAVE YOUR CODE PLUG 1. Load the code plug from your radio using your the CPS that you normally use for that version of the firmware currrently in your radio.

2. Save th​e code plug as you will need it later. UPDATE THE FIRMWARE USING THE DB15 PROGRAMMING CABLE Use Flashburn 3.00 to load the following programs. Use the USB to DB15 programming cable. See the instruction in the CS800D home page for instructions on how to use the Flashburn 3.00 Program.
3. Get the radio into programming mode by pressing P1 as you turn on the radio. The LED should now blink showing multiple colors
4. Load Bootloader R2.05D using Flashburn 3.00 if you do not already have it installed.
5. Turn off the radio.
6. Get the radio into programming mode by pressing P1 as you turn on the radio. The LED should now blink showing multiple colors
7. Load CS800D_RCDB_Upgrade using Flashburn 3.00
8. Turn off the radio.
9. Get the radio into programming mode by pre​ssing P1 as you turn on the radio. The LED should now blink showing multiple colors
10. Load CS800D_Host_MS.30.16 using Flashburn 3.00.
11. Turn off the radio.
12. Turn on the radio. UPDATE THE FRONT PANEL USING THE RJ45 PROGRAMMING CABLE. Use the Front Panel Update Tool to load the following program. See the instruction in the CS800D home page on instructions on how to use the Front Panel Update Tool 1. Unzip the Front Panel Firmware 2. Load Front Panel Firmware UPDATE THE VOICE USING THE DB15 PROGRAMMING CABLE 1. Unzip the voice packet file 2. Reload the Voice Packets using the CPS RESTORE YOUR CODE PLUG 1. Using the CPS Data Translate program in CPS version R4.03.09, update the code plug saved earlier. See the instructions in the CS800D home page on instructions on how to do it.
13. Write it back to your radio. IF THE RADIO IS BRICKED If the radio is truely bricked, then you have one more step to do before you complete the above steps. Contact us if that happens to you.