Canon LEGRIA GX10 firmware

Firmware history

1. Version 1.0.4.0 Latest Released Oct 24, 2019 First seen Jul 10, 2026
   Show release notes Hide release notes

   Firmware Version 1.0.4.0 incorporates the following enhancement:

   1. The focus following speed during zooming has been improved. Caution:

   • Firmware version 1.0.4.0​ is for updating VIXIA GX10 / LEGRIA GX10 cameras running firmware version 1.0.0.0 - 1.0.3.0. If your camera's firmware is already version 1.0.4.0, it is not necessary to update the firmware. Once the camcorder is updated to the latest version, it cannot be restored to a previous version. Preparations for the Firmware Update:
   • Please use a commercially available SD / SDHC / SDXC memory card that is 512MB or more for the firmware update.
   • After the firmware update has been performed, the camera's menu settings will be reset. It is recommended that users save their menu settings as settings data to an SD card, separate from the one that will be used to carry out the update, before starting update operations. This saved data can be loaded into the camera and the settings can be changed after the update has been completed. For further information on this, please refer to the section in the unit's Instruction Manual titled "Saving and Loading Camera Settings".
   • The downloaded folder contains the firmware (file name: VNA4. FIM / file size: 30,081,056 bytes), and instructions on the firmware update procedures (a PDF file in five languages: Japanese, English, French, Spanish and Simplified Chinese). Before starting the firmware update operations, please be sure to carefully confirm your understanding of these instructions. The following things are required to perform this firmware update:

   1. A camera body VIXIA GX10 / LEGRIA GX10
   2. A computer (OS Requirements: macOS X 10.7 - 10.15)
   3. A 512MB or higher-capacity SD / SDHC / SDXC memory card (both commercially available)
   4. An SD card reader/writer (commercially available) or an SD card slot built into the computer
   5. A fully charged battery pack for the camera
   6. Compact power adapter bundled with the camera
   7. The firmware (the downloaded file) History: Changes in Firmware Version 1.0.3.0:
   8. Setting custom white balance, <Set WB>, has been added to the list of selections available to the assignable button.
   9. The aperture value displayed for referenc​e on the screen will match the aperture value written on the outside of the lens.

   • Please note that there will be no change in the actual aperture values before and after the firmware update. Changes in Firmware Version 1.0.2.0:

   1. Fixes a white balance error that may occur when using Auto mode or a Special Scene mode* depending on usage conditions.

   • Portrait/Sports/Night Scene/Snow/Low Light/Spotlight

   2. Improves the focus tracking accuracy during zoom operations. Changes in Firmware Version 1.0.1.0:
   3. The flicker reduction function has been added.
   4. Enhances menu operations so that the Browser Remote setting options are retained after switching off the camera.
   Release notes & download