Arcom Controllers RC210 (M2561 CPU) firmware v7.36

Note: This firmware version requires RCP 7.36 Identified bug in DVR recording and playbug routines related to use of new ISD IC. This caused "stuttering" and bits and pieces of other tracks to be heard when recording and playing back DVT Tracks. New Command:

• 7007x where x=0 for ISD IC with -04 suffix or x=1 for IC with 05 suffix Extended DVR Time available if you have the updated ISD4003-05 speech IC. There are now a total of 126 seconds available.

If you still have the older ISD4003-04 speech IC, available t​ime is still 64 seconds Increased Scheduler Setpoints from 20 to 40.

There are now 3 unique Initial Voice IDs that rotate (1-2-3-1-2-3, etc) only amongst themselves and 3 unique Pending IDs that also rotate only amongst themselves (1-2-3-1-2-3, etc) New way to program ID's:

• 8004x yyy yyy yyy where x is 1 for Initial and 2 for Pending ID #1 . yyy 3 digit Vocabulary Words up to 22 groups total
• 8005x yyy yyy yyy where x is 1 for Initial and 2 for Pending ID #2 . yyy 3 digit Vocabulary Words up to 22 groups total
• 8006x yyy yyy yyy where x is 1 for Initial and 2 for Pending ID #3 . yyy 3 digit Vocabulary Words up to 22 groups total New Macro Functions for Pending IDs 692 Play Port 1 Pending ID 693 Play Port 2 Pending ID 694 Play Port 3 Pending ID There are now 3 unique DTMF Rege​n Prefixes and associated Port assignments and Macros. This allows for different Port assignments. For example, perhaps you have both an Allstar and IRLP node, one on Port 2 and the other on Port 3. Now you can direct regenerated DTMF to either Port by using the appropriate pre-programmed Prefix.

Major change in Autopatch commands - instead of having one Prefix for all Autopatch commands, the following unique codes may now be programmed: Hang Up Code - up to 5 DTMF Digits OffHook Code - up to 5 DTMF Digits AutoDial Code - up to 5 DTMF Digits Timeout Timer Extend Code - up to 5 DTMF Digits In addition, a new Macro Function to automatically dial 911: 336 - Dial 911