Arcom Controllers RC210 (M2561 CPU)
firmware v8.061
Arcom Controllers · Released Nov 3, 2024 · First seen Sep 9, 2026
Source:
arcomcontrollers.com
v8.061 is not the latest firmware for the Arcom Controllers RC210 (M2561 CPU): the current version is v8.0543 (January 7, 2024). Go to v8.0543
In short — summary by updatemystuff.com
Memory leak fix eliminates ID dropouts and audio shifts; new fan programming commands added.
- Memory leak fix corrects ID dropouts and audio level changes
- New DTMF fan programming commands
- Fixed Alarm auxiliary audio and linked-port PTT bugs
Written from Arcom Controllers's release notes, which are printed in full below.
Was this useful? Thanks.
What's in this update
Note: This firmware version requires RCP 8.06 Some users reported changing audio levels and ID's stopping.
Traced to memory leak and corrected.
Manual Data Send (MDS) speech is now controlled by "Allow Speech /w Terminator setting", just as DTMF entered commands are.
Fixed bug where Alarm didn't properly pass Auxiliary Audio to designated Port(s) if called from a Macro.
Fixed bug where a linked-to Port didn't always drop PTT upon starting Initial ID on linked-from Port Users with PC Board Version 3.5 and later can take advantage of an additional uniquely programmed Fan Output.
New DTMF Fan Programming Commands:
- 1004xy where x = 1 or 2 (for Fan #) and y = 1 to 255 minutes
- 2119xy where x = 1 or 2 (for Fan #) and y = 1 for All XMT Activity or 0 for only RX activity.
updatemystuff.com never hosts firmware files — always download from the official source.
Get it from Arcom ControllersWatch the RC210 (M2561 CPU) for updates
Create a free account and get an email the moment Arcom Controllers publishes new firmware.
Create account & watch