AnyTone AT-D578UV
firmware v1.10N
AnyTone · Released Sep 8, 2020 · First seen Sep 14, 2026
Source:
anytone.net
v1.10N is not the latest firmware for the AnyTone AT-D578UV: the current version is v1.21 (June 19, 2024). Go to v1.21
In short — summary by updatemystuff.com
Fixed reception loss with sub band, first-word audio loss in DMR, and 5-tone timing; added APRS send.
- Fixed reception loss when sub band is enabled
- Fixed missing audio on first word of DMR Simplex/Double Slot transmissions
- Added APRS send key to transmit position data
Written from AnyTone's release notes, which are printed in full below.
Was this useful? Thanks.
What's in this update
- Improve the issue that radio will grab a TG when the repeater is in Call Hold Off time.
- Improve the issue that “GPS information doesn’t display with using a programmed “GPS info” key when only analog channels are in use” .
- Improve the issue that “By receiving Dmr in Simplex and Double Slot mode, several times the demodulated audio of first word is missing” .
- CPS->Channel -> Analog, R5toneBot, R5tone Eot, allows to set different 5Tone PTT ID for each channel.
- Resolve the issue that “ By composing a 5 tone using Manual Dial (Book, Manual Dial, typing Input ID and pressing PTT, the "stop code" defined in 5 tone setting is not considered as silence (stop code and stop time) but as a tone” .
- When 5Tone - > Beep Tone & Respond are enabled, the radio will respond with itself ID.
- CPS->Key function, add APRS send to the key function. The radio will transmit the APRS information (longitude, latitude, etc..) to the receiver when user press the “APRS send” key.
- Improve the issue that digital monitor displays wrong time slot.
- Improve the issue that “Keeping the sub band enabled, reception on the Main band is often lost or is very delayed”.
- Improve the issue that “After decoding a 5- tone call in repeater mode, the 5- tone response is sent only after the repeater has dropped out”.
- Improve the issue that “By configuring the 5 tones selective call for different call types, starting from when the RF carrier is on pushing PTT, the timing of the beginning of 5 tones sequence does not correspond to the summation of pauses configured in 5 tone setting windows in the CPS. Unexpected delay is also present using DTMF and 2 tone”
- CPS->Digital -> Talk Groups, allows the entry of talk group numbers maximum 16777215.
- When viewing Last Heard contact, Options selection is not available, like it is on the 878. Add the Options selection to D578.
updatemystuff.com never hosts firmware files — always download from the official source.
Get it from AnyToneWatch the AT-D578UV for updates
Create a free account and get an email the moment AnyTone publishes new firmware.
Create account & watch