AnyTone AT-D578UV firmware `v1.07`

AnyTone · Released Apr 25, 2020 · First seen Sep 14, 2026

v1.07 is not the latest firmware for the AnyTone AT-D578UV: the current version is v1.21 (June 19, 2024). Go to v1.21

In short — summary by updatemystuff.com

Fixes analog reception issues, adds display features, improves roaming and APRS stability.

Written from AnyTone's release notes, which are printed in full below.

Was this useful?

Resolve the issue that analog RX with CTCSS/DCS is intermittent.
In CPS-Optional Setting - STE, add STE time setting, it is for analog squelch tail eliminator.
Resolve the issue that export has problem when check on the “ Exclude Channel From Roaming” and “DMR MODE”.
Add CTCSS/DCS Scan
Resolve the issue that Call Tone /Call Reset Tone/Channel Idle Tone have noise.
Resolve the issue that 220MHz analog repeater channel no RX audio.
Change the APRS RX display to callsign instead of channel name display.
Add the“channel name/frequency display switch” to the key function.
Add SFE operations to the radio menu.
Improve the TX cut off issue
Improve the issue that no RX when receive a signal from analog repeater with CTCSS decode signaling （need verification from tester）
Change the maximum bluetooth dormant time to 4minutes, and add OFF option to the BT dormant time.
Improve the issue that radio transmit to wrong TG
Rename the key function “Program Scan” to “VFO Scan” to avoid misunderstanding.
Resolve the issue that auto APRS and auto Roaming don’ t work when the group call/private call hold time set to Infinite.
Improve the issue that radio stuck /reboot when both auto roaming function and auto APRS function are on.

updatemystuff.com never hosts firmware files — always download from the official source.

Create a free account and get an email the moment AnyTone publishes new firmware.