AnyTone AT-D578UV
firmware v1.03
AnyTone · Released Oct 31, 2019 · First seen Sep 14, 2026
Source:
anytone.net
v1.03 is not the latest firmware for the AnyTone AT-D578UV: the current version is v1.21 (June 19, 2024). Go to v1.21
In short — summary by updatemystuff.com
Adds programmable functions and fixes numerous cross-band repeater, audio, and reception issues
- Channel selector and repeater key control now programmable
- Cross-band repeater TX failures and stuck radio issues fixed
- Resolved audio, caller detection, GPS display, and microphone key issues
Written from AnyTone's release notes, which are printed in full below.
Was this useful? Thanks.
What's in this update
- In CPS- >Optional Setting -> Key function -> Short key push, long key push, allows the channel selector programmable for different functions.
- Resolved the analog APRS can not reach aprs.fi issue.
- Resolved the issue that the GPS info doesn’ t show on screen when press the programmed “GPS info” key in an analog channel.
- Resolved the issue that digital - digital cross band repeater function will cause the radio stuck.
- Improved the MMDVM RX signal chopping issue.
- Resolved the issue that B band digital channel no audio when A band analog channel in scanning mode.
- Resolved the green indicate light flash issue during scan.
- Improved the Weather alarm function.
- Resolved the issue that digital-analog cross band repeater function doesn’t work when digital monitor is ON.
- In CPS- >Optional Setting -> Key function, new key function “ repeater” which allows to assign a key to turn ON/OFF the cross band repeater function.
- Resolved the issue that # key will not save the contact and color code when digital monitor is ON.
- In radio menu - setting - radio set - Fan open, add “ both” option to allow the fan open in both conditions.
- When cross band repeater function is ON, the TX prohibit function will be invalid.
- Resolved the cross band repeater sometimes doesn’ t TX.
- Improved the MMDVM RX signal will cause radio stuck issue.
- Resolved the band doesn’t correctly save in DCF file.
- Resolved the issue that AES code only 32numbers when open a codeplug.
- Resolve the issue that APRS import/export doesn’t work well.
- When repeater function is ON, the radio will auto disable Optional Setting - Volume/Audio - Maximum Volume, to resolve the low audio issue in repeater mode.
- Resolved the issue that Menu and Exit key on microphone is invalid when repeater function is ON.
- Resolved the issue that certain callers will not decode and show up as being received on the D578UV radio
updatemystuff.com never hosts firmware files — always download from the official source.
Get it from AnyToneWatch the AT-D578UV for updates
Create a free account and get an email the moment AnyTone publishes new firmware.
Create account & watch