Palstar LA-1K
firmware v1.05H
Palstar · Released Sep 9, 2026 · First seen Sep 9, 2026
Source:
palstar.com
v1.05H is not the latest firmware for the Palstar LA-1K: the current version is v1.09E (September 9, 2026). Go to v1.09E
In short — summary by updatemystuff.com
Improved fault reporting with enhanced display and firmware version information added to RS232
- New fault codes for overdrive, ID, and +Vd
- Fault display on TFT and RS232 with auto-clear
- Larger fault display and ALC blanked during faults
Written from Palstar's release notes, which are printed in full below.
Was this useful? Thanks.
What's in this update
Expand keying status to include: 3= fault overdrive, 5= fault Id, 9= fault +Vd Added Firmware version information to the end of the RS232 status message.
Added variable Displayed_Fault that extends the display of the condition that caused the bypass of the amplifier and that indication will now be sent as the keying status through the RS232 and will blink on the TFT display.
The indication on the display will be cleared on the next PTT or if the mode is changed.
Blank out the ALC display when displaying a fault condition.
Increase the size of the fault display, capitalize 'OVERDRIVE'.
updatemystuff.com never hosts firmware files — always download from the official source.
Get it from PalstarWatch the LA-1K for updates
Create a free account and get an email the moment Palstar publishes new firmware.
Create account & watch