Kenwood TS-590SG
firmware v1.02
Kenwood · Released Jul 28, 2015 · First seen Sep 6, 2026
Source:
kenwood.com
v1.02 is not the latest firmware for the Kenwood TS-590SG: the current version is v1.07 (March 12, 2020). Go to v1.07
In short — summary by updatemystuff.com
Both noise blankers can now be activated simultaneously.
- Hold NB(LEV) key to enable NB1 and NB2 together
- Level adjustment unavailable when both are active
- Companion software updates required for compatibility
Written from Kenwood's release notes, which are printed in full below.
Was this useful? Thanks.
What's in this update
The following feature is updated.
- Enables NB1 and NB2 to be simultaneously set to ON.
When the Noise Blanker is set to OFF, pressing and holding the [NB(LEV)] key enables NB1 and NB2 to be set to ON at the same time. Then, pressing the [NB(LEV)] key again enables NB1 and NB2 to be set to OFF.
When NB1 and NB2 is set to ON at the same time, the Noise Blanker level cannot be adjusted. Adjust the Noise Blanker level once the Noise Blanker is set to OFF and NB1 or NB2 is set to ON.
(Please also update both of the Radio Control Program
ARCP-590G
and the Radio Host Program
ARHP-590G
for functional compatibility.)
updatemystuff.com never hosts firmware files — always download from the official source.
Get it from KenwoodWatch the TS-590SG for updates
Create a free account and get an email the moment Kenwood publishes new firmware.
Create account & watch