Icom IC-7760

Icom IC-7760 firmware

Icom · IC-7760 · IC-7760 · HF transceiver

Latest firmware for the Icom IC-7760 is v1.15 (January 23, 2026).

Specifications

IC-7760 specifications

Type
Amateur HF/VHF transceiver
Frequency range
TX: 10-160 m + WARC / 6 m (Also 60 m for USA and 136 KHz for Europe) / RX: 0.03-60 MHz
Modes
AM / FM / SSB / CW / RTTY / PSK31 and 63
Show the full specification

General

Mode
AM / FM / SSB / CW / RTTY / PSK31 and 63
Type
Amateur HF/VHF transceiver
Weight
Control head:2.3 Kg (5.1 lb) RF deck:15.8 Kg (34.8 lb)
Power supply
RF deck Mains: 90-264 VAC (3-pin IEC C14 connector) Control head 15 VDC (Male barrel jack, center positive)
Tuning steps
Down to 1 Hz
Other features
Separate control head and RF deck. Remote control via LAN. Two touch displays; one 7" main and one 2.4" sub. Dual identical independent receivers and two speakers. Dual spectrum/waterfall display. Audio scope display. Two DSP (One in the RF deck and one in the controller). Digital preselector. A total of 15 separate bandpass filters. I/Q output. The transmitter employs digital pre-distortion technology for a clean output signal. Built-in auto-ATU. RTTY/PSK encoder/decoder. SD card slot. DVI-D jack for external display. Main/Sub band tracking function for diversity reception. VOX. Transverter jack. Microphone equalizer. CTCSS/PL. Screen saver. USB port for RC-28, keyboard, mouse and flash drive connection. Electronic keyer.
Frequency range
TX: 10-160 m + WARC / 6 m (Also 60 m for USA and 136 KHz for Europe) RX: 0.03-60 MHz
Dimensions (W*H*D)
Control head:340*118*104 mm (13.4*4.6*4.1") RF deck:425*149*442 mm (16.7*5.9*17.4")
Frequency stability
Less than ±0.5 ppm @ 0 to 50°C (32 to 122°F)
Channels / memory management
99 regular 2 scan edges
Antenna impedance / connector
16.7-150 ohm (ATU range) / Four SO-239 + two BNC (RX in/out)
Current drain / power consumption
RX: 150 VA TX: Max 800 VA

Miscellaneous

Manufactured
Japan, 2024-202x

Receiver Section

Selectivity
AM (Filter: Sharp, BW: 6 KHz) 6 KHz (-6 dB) 15 KHz (-60 dB) FM (Filter: Sharp, BW: 15 KHz) 12 KHz (-6 dB) 20 KHz (-60 dB) SSB (Filter: Sharp, BW: 2.4 KHz) 2.4 KHz (-6 dB) 3.6 KHz (-60 dB) CW (Filter: Sharp, BW: 500 Hz) 500 Hz (-6 dB) 700 Hz (-60 dB) RTTY (Filter: Sharp, BW: 500 Hz) 500 Hz (-6 dB) 700 Hz (-60 dB)
Sensitivity
HF: Preamp 1 ON. 50 MHz: Preamp 2 ON. AM (10 dB S/N. Soft filter) 0.5-1.8 MHz: 6.3 uV 1.8-30 MHz: 2 uV 6 m: 1 uV FM (12 dB SINAD. Soft filter) 1.8-30 MHz: 0.5 uV 6 m: 0.32 uV SSB/CW (10 dB S/N. Soft filter) 135 KHz: 1.41 uV 1.8-30 MHz: 0.16 uV 6 m: 0.13 uV
Image rejection
HF: 70 dB 6 m: 70 dB
Receiver system
Direct sampling superheterodyne IF: 12 KHz
AF output power / speaker
2 W at 10% distortion / 8 ohm
External speaker connector
Two TS minijacks (3.5 mm)

Transmitter Section

RF output power
AM:0.25-25 W FM:1-200 W SSB (PEP):1-200 W CW:1-200 W RTTY/PSK:1-200 W 100% duty cycle!
Modulation system
AM: Digital low power modulation FM: Digital reactance modulation SSB: Digital PSN modulation
Spurious emissions
HF: Better than -50 dB 6 m: Better than -66 dB
Microphone input level
? mV
Max FM deviation (Factory set)
±? KHz
Microphone impedance / connector
600 ohm / 8-pin (Male locking ring jack)

Changelog

IC-7760 firmware changelog

  1. v1.14 v1.15

  2. v1.13 v1.14 Fixed RTTY/PSK character display colors and restricted network name to A-Z, 0-9, hyphen, and underscore.

  3. v1.12 v1.13

  4. v1.10 v1.12 Added audio retransmission to prevent sound interruption from packet loss and enabled audio buffer adjustments without restart.

  5. v1.01 v1.10 Wireless and internet RF deck connectivity with audio buffer options, USB I/Q output fix.

  6. v1.01 first tracked

Firmware history

All versions below were published by Icom on icomjapan.com, icomamerica.com, icomeurope.com and icom.co.jp. Third-party and modified firmware is never listed.

  1. Version 1.15 Latest Released Jan 23, 2026 First seen Sep 6, 2026

    Source: icomjapan.com

    Show release notes

    Changes from Versi​on 1.14

    • Production process improvement. No ch​anges in user operations.
    Release notes & download
  2. Version 1.14 Released Dec 5, 2025 First seen Sep 7, 2026

    Fixed RTTY/PSK character display colors and restricted network name to A-Z, 0-9, hyphen, and underscore. — summary by updatemystuff.com

    Source: icomjapan.com

    Show release notes

    Changes from Version 1.13

    • Changed the limitation of charac​ters that can be entered in the Network Name setting.

    Usable characters: A~Z, 0~9, - (hyphen), _ (underscore)

    The network name set before the firmware update can still be used after the update, but once deleted, you can only enter the characters mentioned above.

    • Fixed a bug where characters were displayed in a different color from the set tex​t color on the RTTY/PSK decode screen.

    Refer to INFORMATION IC-7760 Version 1.14 for details.

    Release notes & download
  3. Version 1.13 Released Jun 12, 2025 First seen Sep 7, 2026

    Source: icomjapan.com

    Show release notes

    Changes from Version 1​.12

    • Improved the problem of modulation not being applied due to network latency conditions when ​the RF deck and the controller are connected via the Internet.
    Release notes & download
  4. Version 1.12 Released Apr 17, 2025 First seen Sep 7, 2026

    Added audio retransmission to prevent sound interruption from packet loss and enabled audio buffer adjustments without restart. — summary by updatemystuff.com

    Source: icomjapan.com

    Show release notes

    Changes from Version 1.10

    • Added the Audio Retransmission function to prevent sound interruption from packet loss in Internet and Wi-Fi environments.
    • Added the Packet Loss indication between the Controller and the RF deck.
    • Reduced data transmission between the Controller and the RF deck.
    • Improved ability to ​apply changes to the Audio Buffer settings without restarting the transceiver after making changes.

    Refer to INFORMATION IC-7760 Version 1.12 for details.

    Release notes & download
  5. Version 1.10 Released Feb 25, 2025 First seen Sep 7, 2026

    Wireless and internet RF deck connectivity with audio buffer options, USB I/Q output fix. — summary by updatemystuff.com

    Source: icomjapan.com

    Show release notes

    Changes from Version 1.01

    • Connection between RF deck and Controller supports via wireless LAN or Internet.
    • Added options for the Audio Buffe​r Size items on the Network screen.
    • Supported for SDXC cards up to 256GB

    Formatting on the transceiver is required.

    • Fixed a bug that caused the USB (I/Q OUT) port to stop functioning when a st​rong signal is input.

    (When using the IC-PW2, use the firmware version 1.20 or later for the IC-PW2. Please download the latest version from here .)

    Refer to INFORMATION IC-7760 Version 1.10 for details.

    Release notes & download
  6. Version 1.01 Released Aug 28, 2024 First seen Sep 7, 2026

    Source: icomjapan.com

    Show release notes

    This is the first release.

    Release notes & download

Watch the IC-7760 for updates

Get an email the moment Icom publishes new firmware. Just your email — no account or password needed.

More Icom hf transceivers we track