DJI RSC 2 firmware v01.01.00.10

?

• Added video recording, camera settings, autofocus, and focus pull support for Sony A7S III and A7C cameras with supported Sony Emount lenses using a Multi-Camera Control Cable (USB-C). To use autofocus on the Sony A7S III and A7C cameras, press halfway down on the camera control button of the gimbal.
• Added photo capture, video recording, camera settings, autofocus, and focus pull support for Nikon Z6 II and Z7 II cameras with supported Nikkor lenses using a Multi-Camera Control Cable (USB-C). To use autofocus on the Nikon Z6 II and Z7 II, press halfway down on the camera control bu​tton of the gimbal.
• Added photo capture, video recording, camera settings, autofocus, and focus pull support for Nikon D500 cameras with supported Nikkor lens using a Multi-Camera Control Cable (Micro-USB). To use autofocus on the Nikon D500, press halfway down on the camera control button of the gimbal.
• Added photo capture, video recording, camera settings, autofocus, and focus pull support for Panasonic Lumix S5 cameras with supported L-mount lens using a Multi-Camera Control Cable (USB-C). To use autofocus on the Panasonic Lumix S5, press halfway down on the camera control button of the gimbal.
• Added video recording, camera settings, autofocus, and focus pull support for Panasonic Lumix BGH1 cameras with supported Micro 4/3 mount lenses using a Multi-Camera Control Cable (USB-C). To use autofocus on the Panasonic Lumix BGH1, press halfway down on the camera control button of the gimbal.
• Added aperture settings for Olympus E-M1 II cameras.
• Added ability to check the battery level while the gimbal is powered off by pressing the power button once.
• Added ability to auto calibrate and delete endpoints for the focus motor. Enter advanced settings and scroll through to select the endpoint settings for the focus motor.
• A​dded ability to access camera settings for DJI RavenEye Image Transmission System by connecting the camera using a camera control cable.
• Optimized power management for DJI RavenEye Image Transmission System, increasing the runtime of both the transmission system and gimbal.
• Optimized the DJI RavenEye Image Transmission System connection experience by removing the default password 12345678. After linking via the system’s Wi-Fi, a password must be set in the DJI Ronin app.

The password must be 8 characters long and consist of letters and numbers.

• Optimized the gimbal transition when switching to Briefcase mode.
• Fixed occasional issue: when using with the BMPCC 4K camera, the gimbal axes failed to stabilize when changing the frame rate during recording.
• Fixed issues: Nikon Z5, D780, and D5 cameras could not display the liveview on a camera, mobile device, or gimbal after connecting to DJI RavenEye Image Transmission System.
• Fixed occasional issue: when using the Panasonic GH5, GH5S, S1, S1H, and G9, the gimbal failed to control the camera after hot plugging the camera control cable.

DJI RSC 2 Release Notes http://www.dji.com/rsc-2

• Fixed issue: when using the Olympus E-M1 II camera, the camera restarted repeatedly and was unable take photos in AF mode after hot plugging the camera control cable.
• Fixed issue: unable to take photos in AF mode by pressing and holding the camera control button when using the Sigma FP camera.