DJI Digital FPV System firmware v01.00.05.00

?

• Added ability to view HDMI live broadcast by connecting the goggles to the DJI Smart Controller (v01.00.07.00 or above). By connecting the goggles to the DJI Smart Controller using USB-Ccable, users can see the camera view of the air unit on the screen of the Smart Controller, and then can transmit the live view from the Smart Controller to other display devices through an HDMI cable.
• Added new custom on-screen display information: home point direction, home point distance, altitude, and GPS speed.
• Added on-screen flashing prompt on the goggles when the signal of the air unit or the remote controller is weak.
• Added menu setting to choose to enable reco​rding after unlocking the flight controller.
• Added menu setting to choose to enable the low battery warning alarm of the goggles.
• Added support for Caddx Nebula camera model.
• Optimized display and operation in the AV IN interface. Added menu setting to adjust screen size and position and added on-screen display for the battery level of the goggles.
• Fixed issue: screen blurred or froze when unlocking Air Unit (Lite).
• Fixed issue: operation was delayed when using the remote controller on a simulator.
• Fixed rare issue: the PID tuning did not take effect after changing the settings.

Notice:

• Restart the air unit, goggles, and remote controller once the update is complete.
• Make sure that the firmware of the air unit, the goggles and the remote controller are in the same version.

Check the firmware version in Setting, Device Info, and then Device Info on goggles.

• If the firmware update fails, restart the device and DJI Assistant 2 (DJI FPV Series), and try updating again.
• Update the Air Unit (Lite) whe​n there is good ventilation. Make sure that both the goggles and remote controller are powered off before updating the Air Unit (Lite). DO NOT touch the Air Unit (Lite) during DJI Digital FPV System Release Notes http://www.dji.com/fpv update since the temperature rises. If update fails, wait for the Air Unit (Lite) to cool down and try to update again.

Coming in Next Update:

• High bitrate mode (50Mbps), which provides better image quality.

DJI Digital FPV System Release Notes http://www.dji.com/fpv