Arcom Controllers RC210 (M128 CPU)
firmware v4.63
Arcom Controllers · Released Sep 27, 2006 · First seen Sep 9, 2026
Source:
arcomcontrollers.com
v4.63 is not the latest firmware for the Arcom Controllers RC210 (M128 CPU): the current version is v6.0454 (January 5, 2021). Go to v6.0454
In short — summary by updatemystuff.com
Added DTMF evaluation control; fixed message macro delays and fan startup
- New DTMF evaluation control via COS or CTCSS closure, per-port selection
- Fixed Tx Delay inserted between multiple Message Macros
- Fixed fan startup with Autopatch in non-repeat mode
Written from Arcom Controllers's release notes, which are printed in full below.
Was this useful? Thanks.
What's in this update
Feature addition and anomoly correction When speech was sent to a Port that wasn't already transmitting and that speech consisted of more than one Message Macro, Tx Delay was inserted which caused long delays between Message Macros.
That is now fixed Corrected bug in Kenwood G707 code where memory recall didn't always work on the first try.
Correct bug where fan didn't start if all Ports were in non-repeat mode and Autopatch was used.
Added new feature which allows control of DTMF evaluation on either COS or CTCSS closure.
This can be helpful if your squelch locks open and may be selected on a Port-by-Port basis Note: This firmware version requires RCP 5.04
updatemystuff.com never hosts firmware files — always download from the official source.
Get it from Arcom ControllersWatch the RC210 (M128 CPU) for updates
Create a free account and get an email the moment Arcom Controllers publishes new firmware.
Create account & watch