AOR AR-DV10 firmware
AOR · AR-DV10 · AR-DV10 · SDR receiver
Latest firmware for the AOR AR-DV10 is v2504B (December 2, 2025).
Changelog
AR-DV10 firmware changelog
-
v2410Av2504BScreen layout now displays NXDN RAN and DCR codes simultaneously; false detections reduced and P25 beeping and DCR display issues fixed. -
v2205Av2410AAdded YAESU Mode voice demodulation and new DCR Mode features including Whitening Code and improved scanning.
Firmware history
All versions below were published by AOR on aorja.com and aorusa.com. Third-party and modified firmware is never listed.
-
Screen layout now displays NXDN RAN and DCR codes simultaneously; false detections reduced and P25 beeping and DCR display issues fixed. — summary by updatemystuff.com
Source:
aorja.comRelease notes & downloadShow release notes Hide release notes
--> Firmware version history: 2410A 2024/11/21 --> Feature Improvements:
- Reduced false detections when receiving D-STAR and dPMR signals.
- Updated the screen layout to allow simultaneous display of the NXDN RAN code and the DCR WC/UC codes.
Bug fixes
- Resolved an issue where a beeping sound could occur when receiving P25 signals due to the mute failing during data packet reception.
- Fixed a problem in which the WC code for DCR signals would occasionally fail to display.
-
Added YAESU Mode voice demodulation and new DCR Mode features including Whitening Code and improved scanning. — summary by updatemystuff.com
Source:
aorja.comRelease notes & downloadShow release notes Hide release notes
--> Firmware version history: 2410A 2024/11/21 --> Feature Improvements: YAESU Mode:
- Now supports voice demodulation for the 12kHz wide VOICE WIDE (VW) mode.
No additional settings are required. Following new features are limited to Japanese "DIGITAL CONVENIENCE RADIO" (D-CR) signals:
- DCR Mode - Whitening Code (WC):
- Added Whitening Code (WC) functionality to selective reception features.
AUTO and manual code settings are supported: AUTO Mode: Automatically decodes the voice regardless of the Whitening Code set by the transmitter.
The detected code number is displayed on-screen.
Manual Mode: Allows manual selection of a Whitening Code from 001 to 511.
How to Access This Feature: Set the receive mode to "D-CR". [Long press MODE] → [5 DIGI CONF] → (p2/2) DCR WC
- DCR Mode - Auto-Descramble:
- The 15-bit auto-descramble function now works even when the transmitter has enabled the "Selective Call" feature.
No additional settings are required.
- DCR Mode - Scan & Search Enhancements:
- The Scan & Search feature now bypasses signals containing only a carrier or data. However, it will still stop on encrypted signals, which cannot be decoded.
No additional settings are required.
-
Source:
aorja.comRelease notes not published by vendor — see official page.
Release notes & download -
Source:
aorja.comRelease notes not published by vendor — see official page.
Release notes & download -
Source:
aorja.comRelease notes not published by vendor — see official page.
Release notes & download -
Source:
aorja.comRelease notes not published by vendor — see official page.
Release notes & download -
Source:
aorja.comRelease notes not published by vendor — see official page.
Release notes & download -
Source:
aorja.comRelease notes not published by vendor — see official page.
Release notes & download -
Source:
aorja.comRelease notes not published by vendor — see official page.
Release notes & download -
Source:
aorja.comRelease notes not published by vendor — see official page.
Release notes & download -
Source:
aorja.comRelease notes not published by vendor — see official page.
Release notes & download -
Source:
aorja.comRelease notes not published by vendor — see official page.
Release notes & download -
Source:
aorja.comRelease notes not published by vendor — see official page.
Release notes & download -
Source:
aorja.comRelease notes not published by vendor — see official page.
Release notes & download -
Source:
aorja.comRelease notes & downloadShow release notes Hide release notes
--> First release.
Watch the AR-DV10 for updates
Get an email the moment AOR publishes new firmware. Just your email — no account or password needed.