Afedri SDR LAN-IQ SDR rev.1.x firmware
Afedri SDR · LAN-IQ SDR rev.1.x · LAN-IQ SDR rev.1.x · SDR receiver
Latest firmware for the Afedri SDR LAN-IQ SDR rev.1.x is v7043 (September 9, 2026).
Changelog
LAN-IQ SDR rev.1.x firmware changelog
-
v70059/0002v7038New AM bandwidth filters; system freezing and audio mute bugs resolved. -
v70058/0001v70059/0002Enhanced FT8 burst synchronization and filter performance for high sample rates, with RDS text improvements. -
v70054/0000v70058/0001Adds FM RDS decoder with display and streaming, frequency shift-tuning mode for panadapter use, and SNR measurement. -
v70050/0009v70052/0000Adds FT8 decoder, NTP time synchronization, and telnet server for forwarding decoded messages. -
v7004Cv7004DSAM mode gets automatic frequency control with wider locking range and lock indication. -
v7004bv7004CAdded real-time main clock frequency calibration accessible through settings menu.
Firmware history
All versions below were published by Afedri SDR on afedri-sdr.com. Third-party and modified firmware is never listed.
-
Source:
afedri-sdr.comRelease notes & downloadShow release notes Hide release notes
The firmware for LAN_IQ SDR rev.1.x
- Non standard SR freezing bug solved
- IQ buffer cash refresh bug solved
- USB Audio sample rate save limits added
- Main Clock frequency limits added.
-
New AM bandwidth filters; system freezing and audio mute bugs resolved. — summary by updatemystuff.com
Source:
afedri-sdr.comRelease notes & downloadShow release notes Hide release notes
The firmware for LAN_IQ SDR rev.1.x
- Solved bug with system freezing in some condition
- Fastest audio level recovery after modulation chanegs
- The new bandwidth options (filter) added to AM mode, now it is : 5khz, 9khz, 20khz
- Changed algorithm of frequency tuning STEP changes dependent to modulation.
- Solved bug related to sporadic Audio channel mute after modulation , sample rate change.
-
Source:
afedri-sdr.comRelease notes & downloadShow release notes Hide release notes
The firmware for LAN_IQ SDR rev.1.x
- DC offset compensation option added (see 'Mode' menu -> 'DC rem.')
- The new bandwidth options (filter) added to Narrow FM mode: 6khz, 9khz, 12.5khz, 22kHz
-
Enhanced FT8 burst synchronization and filter performance for high sample rates, with RDS text improvements. — summary by updatemystuff.com
Source:
afedri-sdr.comRelease notes & downloadShow release notes Hide release notes
New Firmware fw. version 70059/0002, accumulated improvements since previous stable release. What is new:
- RDS radio text string length is limited (to eliminate glitches)
- Radio text position was changed
- FT8 'burst' synchronization
- Some minor changes in GUI process
- Filter structure changed for sample rates higher than 1333kHz, to significantly improve aliases suppression.
-
Adds FM RDS decoder with display and streaming, frequency shift-tuning mode for panadapter use, and SNR measurement. — summary by updatemystuff.com
Source:
afedri-sdr.comRelease notes & downloadShow release notes Hide release notes
New Firmware fw. version 70058/0001, accumulated improvements since previous stable release. What is new:
- Narrow CW filters for bandwidth : 25Hz, 50Hz, 100Hz have been implemented.
- Broadcast FM RDS decoder implmented, Now you can see RDS information (PI and service name) printed on the screen.
- RDS bit 'ASCII G' stream also is sent over telnet protocol and can be forwarded directly to 'RDS Spy' utility for further data processing (groups analyze etc.).
- New frequency tuning mode added that can be convenient for use LAn-IQ SDR as panadapter or use SDR for QO100 listening.
In this mode the Central (NCO) frequency is locked and SDR can be tuned to any frequency inside RX bandwidth, without changing Central frequency. The new tune mode called : Settings, -> Misc. -> NCO lock/Shift tune or Mod. -> Ext. -> Shift (NCO) key
- Added ability to lock frequency on QO-100 BPSK beacon (Mode.->Ext.. -> S.Lock). All QO100 related operations are located in the same menu.
- S-meter now slower and has same delay for every sample rate
- Some changes in cw decoder algorithm.
- SNR measurement has been added to service. For precision SNR measurement (excluding WFM mode) - it is recommended to use IF or BB/IF screens.
SDR measures SNR in RX channel bandwidth.
- Significant changes in spectrum screens procedures and management.
-
Source:
afedri-sdr.comRelease notes & downloadShow release notes Hide release notes
The new experimental firmware for LAN_IQ SDR rev.1.x What is new:
- Correct Audio spectrum in SAM modes
-
Adds FT8 decoder, NTP time synchronization, and telnet server for forwarding decoded messages. — summary by updatemystuff.com
Source:
afedri-sdr.comRelease notes & downloadShow release notes Hide release notes
The new experimental firmware for LAN_IQ SDR rev.1.x What is new:
- FT8 decoder implemented Mod. -> Digit. -> FT8
- SDR time clock NTP time synchronization implemented.
Settings -> Time -> T.sync.
- Telenet server implemented in the new firmware, that forwards decoded FT8 messages to telnet client console For NTP service LAN-IQ SDR should be connected to internet
-
Source:
afedri-sdr.comRelease notes & downloadShow release notes Hide release notes
The new experimental firmware for LAN_IQ SDR rev.1.x
-
SAM mode gets automatic frequency control with wider locking range and lock indication. — summary by updatemystuff.com
Source:
afedri-sdr.comRelease notes & downloadShow release notes Hide release notes
The new firmware for LAN_IQ SDR rev.1.x
- The AFC (automatic frequency control) procedure has been added for SAM mode.
That allows wider frequency locking range +/-1000Hz .
- The new menu added to enable / disable SAM AFC function :
'Settings -> Misc. -> SAM AFC' (switch box)
- SAM PLL lock indication has been added, on the Frequency Indicator top left corner: frequency shift is blinking when local oscillator is not locked and lighting constantly when PLL locked to a station signal.
-
Added real-time main clock frequency calibration accessible through settings menu. — summary by updatemystuff.com
Source:
afedri-sdr.comRelease notes & downloadShow release notes Hide release notes
The new release candidate firmware for LAN_IQ SDR rev.1.x
- New Main Clock calibration mechanism has been added (in addition to old).
Now there is possibility to change (calibrate) main clock frequency in real time using special menu 'Setting-> About -> Clock calibration (ppm)' menu.
-
Fixes encoder freezing after button press and resolves SAM bandwidth handling issues — summary by updatemystuff.com
Source:
afedri-sdr.comRelease notes & downloadShow release notes Hide release notes
The new release candidate firmware for LAN_IQ SDR rev.1.x
- Some improvements was done - for Synchronous AM demodulator
- SAM and 20Khz bandwidth is working correctly now
- SAM for Single Side modes now shows correct bandwidth (half of AM)
- Encoders freeze after push bug is solved
-
Adds Synchronous AM demodulator mode with three sub-modes. — summary by updatemystuff.com
Source:
afedri-sdr.comRelease notes & downloadShow release notes Hide release notes
The new release candidate firmware for LAN_IQ SDR rev.1.x
- New mode added - Synchronous AM demodulator , SAM There is three possible sub.modes for SAM:
- Dual Side Band, named: 'SAM'
- Up Side Band, named: 'SAMU'
- Low Side Band, named: 'SAML'
-
AGC delays adjusted, WFM improved, Airband reference and RF menu corrected. — summary by updatemystuff.com
Source:
afedri-sdr.comRelease notes & downloadShow release notes Hide release notes
The new release candidate firmware for LAN_IQ SDR rev.1.x
- AGC-F, AGC-M, AGC-S delays was changed (AGC-M, AGC-S - shorter than before) Noe AGC-F set to 0.5s , AGC-M to 1.5s, AGC-S to 2.5s
- WFM mode for 80kHz when 768kHz sample rate - improved
- 8.33kHz step for Airband now set to correct reference (channel)
- RF Conn. menu frequemcy now have correct units - i.e. MHz
-
Adds squelch, expanded bandwidth/filtering options for AM and SSB modes, and AGC speed controls. — summary by updatemystuff.com
Source:
afedri-sdr.comRelease notes & downloadShow release notes Hide release notes
The new release candidate firmware for LAN_IQ SDR rev.1.x
- Screen Saver functions added
- LCD off mode added
- Squelch is added
- New Bandwidth and IF filtering options for AM mode added:
5kHz, 6.5kHz, 8kHz, 9kHz, 10khz, 20khz
- New Bandwidth and IF fiitering for SSB mode added:
1.8kHz, 2.4kHz, 2.7kHz, 3.3kHz
- Tuning step choice menu has been changed, the new steps added:
1Hz, 10Hz,100Hz, 1kHz, 10kHz, 100kHz, 5kHz, 8.33kHz, 9khz, 12.6kHz, 25kHz, 50kHz
- The maximal Broadcast FM (WFM) bandwidth reduced to 250kHz
- Broadcast FM (WFM) bandwidth 80kHz allowed for all standard sample rates
- CW pitch offset frequency indication added
- CW pitch value change box added.
- Last used Bandwidth is stored in nonvolatile memory separately per each signal modulation.
- High pass audio filter added for AM mode.
- DC offset mode indicator added
- AGC speed (AGC-F, AGC-M, AGC-S ) options and menu added
- Optional Frequency alignment to standard tuning step is added , it can be switched on or off from special menu
- The new check-box added , that allows to choose the Encoder minimal step 1 or 2 (to make more convenient tuning with 2 pulses per detent encoder)
- New menu 'Settings->'Misc' added that has some new features controls, like:
- Encoder step 1 or 2
- Frequency tune alignment according tuning step (On /Off)
- Screen Saver on /off
- New Menu 'Setting->RF Connect' added - that allows users to find which connector if HF which is VHF :-)
-
Source:
afedri-sdr.comRelease notes & downloadShow release notes Hide release notes
Display Num 5 10 15 20 50 100 All Powered by Powered by
Watch the LAN-IQ SDR rev.1.x for updates
Get an email the moment Afedri SDR publishes new firmware. Just your email — no account or password needed.
More Afedri SDR sdr receivers we track
- AFE822x SDR-Net / VHFx2 rev.4.x Latest firmware Sep 9, 2026
-
AFE822x SDR-Net rev.0/1/2
Latest firmware Sep 9, 2026
-
AFE822x SDR-Net rev.3.0 HF
Latest firmware Sep 9, 2026
-
AFE822x SDR-VHFx2 rev.3.0
Latest firmware Sep 9, 2026
-
AFE822x SDR-VHFx2 rev.4.1
Latest firmware Sep 9, 2026
- AFE822x4 SDR-Net rev.4.0 Latest firmware Sep 9, 2026